Fatigue crack growth rate and fracture toughness evaluation of 15-5 precipitation hardening stainless steel fabricated by laser powder bed fusion process

[1]  F. Hu,et al.  Effect of retained austenite on impact toughness and fracture behavior of medium carbon submicron-structured bainitic steel , 2021 .

[2]  A. Nath,et al.  Three-body dry abrasive wear properties of 15–5 precipitation hardening stainless steel produced by laser powder bed fusion process , 2021 .

[3]  M. Guo,et al.  Fatigue limit prediction model and fatigue crack growth mechanism for selective laser melting Ti6Al4V samples with inherent defects , 2021 .

[4]  A. Nath,et al.  Effect of Morphology and Particle Size Distribution on the Reusability of 15-5 Precipitation Hardening Stainless Steel Powder in Laser Powder Bed Fusion Process , 2021 .

[5]  Zhou-hua Jiang,et al.  Multiphase microstructure formation and its effect on fracture behavior of medium carbon high silicon high strength steel , 2020 .

[6]  M. Soleimani,et al.  Transformation-induced plasticity (TRIP) in advanced steels: A review , 2020, Materials Science and Engineering: A.

[7]  A. Fatemi,et al.  Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review , 2020 .

[8]  J. Newman,et al.  Fatigue‐life prediction of additively manufactured material: Effects of heat treatment and build orientation , 2020 .

[9]  Fucheng Zhang,et al.  In-situ observation of tensile deformation and retained austenite transformation behaviors in carbide-free bainitic steel , 2020 .

[10]  A. Nath,et al.  Effects of different surface modifications on the fatigue life of selective laser melted 15–5 PH stainless steel , 2019, Materials Science and Engineering: A.

[11]  Wei Li,et al.  The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels , 2019, Wear.

[12]  Yanyao Jiang,et al.  Cyclic deformation and fatigue behavior of additively manufactured 17–4 PH stainless steel , 2019, International Journal of Fatigue.

[13]  N. Shamsaei,et al.  Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure , 2019, International Journal of Fatigue.

[14]  Filippo Berto,et al.  Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion , 2019, International Journal of Fatigue.

[15]  A. Nath,et al.  Effects of heat treatment and build orientations on the fatigue life of selective laser melted 15-5 PH stainless steel , 2019, Materials Science and Engineering: A.

[16]  Jan C. Aurich,et al.  An Investigation of the Microstructure and Fatigue Behavior of Additively Manufactured AISI 316L Stainless Steel with Regard to the Influence of Heat Treatment , 2018 .

[17]  A. Nath,et al.  Effect of mean stresses on mode of failures and fatigue life of selective laser melted stainless steel , 2017 .

[18]  A. Nath,et al.  Effect of Different Heat Treatments on Mechanical Properties of Laser Sintered Additive Manufactured Parts , 2017 .

[19]  G. Barber,et al.  Characteristics of the Transformation of Retained Austenite in Tempered Austempered Ductile Iron , 2017, Journal of materials engineering and performance (Print).

[20]  F. Walther,et al.  Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy , 2017 .

[21]  M. Tang,et al.  Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting , 2017 .

[22]  Alaa Elwany,et al.  Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel , 2017 .

[23]  G. Nicoletto,et al.  Long fatigue crack growth in Inconel 718 produced by selective laser melting , 2016 .

[24]  A. Deschamps,et al.  Evolution of the microstructure of a 15-5PH martensitic stainless steel during precipitation hardening heat treatment , 2016 .

[25]  Galina Kasperovich,et al.  Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting , 2016 .

[26]  T. Mower,et al.  Mechanical behavior of additive manufactured, powder-bed laser-fused materials , 2016 .

[27]  N. Shamsaei,et al.  An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control , 2015 .

[28]  H. Richard,et al.  Fatigue crack growth in additive manufactured products , 2015 .

[29]  Zhaohui Huang,et al.  A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility , 2015 .

[30]  Thomas Tröster,et al.  On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting , 2014 .

[31]  L. M. Kukreja,et al.  Fatigue Crack Propagation and Fracture Toughness of Laser Rapid Manufactured Structures of AISI 316L Stainless Steel , 2014, Metallography, Microstructure, and Analysis.

[32]  V. Kain,et al.  Effect of reverted austenite on mechanical properties of precipitation hardenable 17-4 stainlesssteel , 2013 .

[33]  Zhidan Sun,et al.  Fatigue Crack Growth under High Pressure of Gaseous Hydrogen in a 15-5PH Martensitic Stainless Steel: Influence of Pressure and Loading Frequency , 2013, Metallurgical and Materials Transactions A.

[34]  A. Borgenstam,et al.  Investigation of Lath and Plate Martensite in a Carbon Steel , 2011 .

[35]  R. C. Prasad,et al.  Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures , 2010 .

[36]  Yoritoshi Minamino,et al.  Crystallographic features of lath martensite in low-carbon steel , 2006 .

[37]  G. Reddy,et al.  Microstructure and tensile properties of Inconel 718 pulsed Nd-YAG laser welds , 2005 .

[38]  H. R. Habibi Bajguirani,et al.  The effect of ageing upon the microstructure and mechanical properties of type 15-5 PH stainless steel , 2002 .

[39]  Ming-Chuan Leu,et al.  Progress in Additive Manufacturing and Rapid Prototyping , 1998 .

[40]  Robert O. Ritchie,et al.  Near-threshold fatigue-crack propagation in steels , 1979 .

[41]  J. Barsom,et al.  Fatigue-Crack Propagation in Steels of Various Yield Strengths , 1971 .

[42]  C. S. Carter,et al.  STRESS-CORROSION PROPERTIES OF HIGH-STRENGTH PRECIPITATION-HARDENING STAINLESS STEELS IN 3.5% AQUEOUS SODIUM CHLORIDE SOLUTION , 1970 .