Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance

[1]  Yanglong Hou,et al.  Integrated Design of MnO2 @Carbon Hollow Nanoboxes to Synergistically Encapsulate Polysulfides for Empowering Lithium Sulfur Batteries. , 2017, Small.

[2]  Yayuan Liu,et al.  Catalytic oxidation of Li2S on the surface of metal sulfides for Li−S batteries , 2017, Proceedings of the National Academy of Sciences.

[3]  X. Tao,et al.  Enhanced sulfide chemisorption using boron and oxygen dually doped multi-walled carbon nanotubes for advanced lithium–sulfur batteries , 2017 .

[4]  Jie Zhou,et al.  Synthesis of S/CoS2 Nanoparticles-Embedded N-doped Carbon Polyhedrons from Polyhedrons ZIF-67 and their Properties in Lithium-Sulfur Batteries , 2016 .

[5]  Ruopian Fang,et al.  An integrated electrode/separator with nitrogen and nickel functionalized carbon hybrids for advanced lithium/polysulfide batteries , 2016 .

[6]  Hong‐Jie Peng,et al.  A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries , 2016, Advanced materials.

[7]  Guoxiu Wang,et al.  3D Metal Carbide@Mesoporous Carbon Hybrid Architecture as a New Polysulfide Reservoir for Lithium‐Sulfur Batteries , 2016 .

[8]  Hong‐Jie Peng,et al.  Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium-Sulfur Batteries. , 2016, Angewandte Chemie.

[9]  Yi Cui,et al.  Designing high-energy lithium-sulfur batteries. , 2016, Chemical Society reviews.

[10]  Xiulin Fan,et al.  Tailoring Surface Acidity of Metal Oxide for Better Polysulfide Entrapment in Li‐S Batteries , 2016 .

[11]  Feng Li,et al.  Kinetically Enhanced Electrochemical Redox of Polysulfides on Polymeric Carbon Nitrides for Improved Lithium-Sulfur Batteries. , 2016, ACS applied materials & interfaces.

[12]  Lan Zhou,et al.  Building better lithium-sulfur batteries: from LiNO3 to solid oxide catalyst , 2016, Scientific Reports.

[13]  Linda F. Nazar,et al.  Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes , 2016, Nature Energy.

[14]  Shuangyin Wang,et al.  The enhancement of polysulfide absorbsion in LiS batteries by hierarchically porous CoS2/carbon paper interlayer , 2016 .

[15]  W. Hu,et al.  Pt-Decorated highly porous flower-like Ni particles with high mass activity for ammonia electro-oxidation , 2016 .

[16]  Yanguang Li,et al.  Electrical, Mechanical, and Capacity Percolation Leads to High-Performance MoS2/Nanotube Composite Lithium Ion Battery Electrodes. , 2016, ACS nano.

[17]  Guangyuan Zheng,et al.  Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design , 2016, Nature Communications.

[18]  Yitai Qian,et al.  Hierarchical Carbon Nanotubes with a Thick Microporous Wall and Inner Channel as Efficient Scaffolds for Lithium–Sulfur Batteries , 2016 .

[19]  Dipan Kundu,et al.  A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries , 2016 .

[20]  Xiaofei Yang,et al.  Rational design of a nested pore structure sulfur host for fast Li/S batteries with a long cycle life , 2016 .

[21]  Multiscale sulfur particles confined in honeycomb-like graphene with the assistance of bio-based adhesive for ultrathin and robust free-standing electrode of Li–S batteries with improved performance , 2016 .

[22]  Zhe Yuan,et al.  Powering Lithium-Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts. , 2016, Nano letters.

[23]  Feng Li,et al.  Carbon materials for Li–S batteries: Functional evolution and performance improvement , 2016 .

[24]  Qiang Zhang,et al.  CaO‐Templated Growth of Hierarchical Porous Graphene for High‐Power Lithium–Sulfur Battery Applications , 2016 .

[25]  Kevin G. Gallagher,et al.  Optimizing areal capacities through understanding the limitations of lithium-ion electrodes , 2016 .

[26]  Yi Cui,et al.  Highly Nitridated Graphene–Li2S Cathodes with Stable Modulated Cycles , 2015 .

[27]  Jiaqi Huang,et al.  Multi-functional separator/interlayer system for high-stable lithium-sulfur batteries: Progress and prospects , 2015 .

[28]  Yong Wang,et al.  Polyurethane-derived N-doped porous carbon with interconnected sheet-like structure as polysulfide reservoir for lithium–sulfur batteries , 2015 .

[29]  Jing Mao,et al.  Facile assembly of partly graphene-enveloped sulfur composites in double-solvent for lithium–sulfur batteries , 2015 .

[30]  Yueming Sun,et al.  Ternary Hybrid Material for High-Performance Lithium-Sulfur Battery. , 2015, Journal of the American Chemical Society.

[31]  J. Hassoun,et al.  A long-life lithium ion sulfur battery exploiting high performance electrodes. , 2015, Chemical communications.

[32]  W. Lu,et al.  Fabrication of a novel TiO2/S composite cathode for high performance lithium–sulfur batteries , 2015 .

[33]  L. Arava,et al.  Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li-S Batteries. , 2015, Journal of the American Chemical Society.

[34]  Arumugam Manthiram,et al.  Electrochemically Stable Rechargeable Lithium–Sulfur Batteries with a Microporous Carbon Nanofiber Filter for Polysulfide , 2015 .

[35]  Feng Wu,et al.  3D coral-like nitrogen-sulfur co-doped carbon-sulfur composite for high performance lithium-sulfur batteries , 2015, Scientific Reports.

[36]  X. Tao,et al.  Absorption mechanism of carbon-nanotube paper-titanium dioxide as a multifunctional barrier material for lithium-sulfur batteries , 2015, Nano Research.

[37]  Shiguo Zhang,et al.  Recent Advances in Electrolytes for Lithium–Sulfur Batteries , 2015 .

[38]  Yan Yu,et al.  Flexible copper-stabilized sulfur-carbon nanofibers with excellent electrochemical performance for Li-S batteries. , 2015, Nanoscale.

[39]  Q. Qu,et al.  Strong Surface‐Bound Sulfur in Conductive MoO2 Matrix for Enhancing Li–S Battery Performance , 2015 .

[40]  Xingbo Liu,et al.  Long-life, high-efficiency lithium/sulfur batteries from sulfurized carbon nanotube cathodes , 2015 .

[41]  L. An,et al.  Fabrication of layered Ti3C2 with an accordion-like structure as a potential cathode material for high performance lithium–sulfur batteries , 2015 .

[42]  Jun Lu,et al.  Strong lithium polysulfide chemisorption on electroactive sites of nitrogen-doped carbon composites for high-performance lithium-sulfur battery cathodes. , 2015, Angewandte Chemie.

[43]  Shaogang Wang,et al.  A high-density graphene-sulfur assembly: a promising cathode for compact Li-S batteries. , 2015, Nanoscale.

[44]  Arumugam Manthiram,et al.  Lithium–Sulfur Batteries: Progress and Prospects , 2015, Advanced materials.

[45]  N. C. Murmu,et al.  Development of high energy density supercapacitor through hydrothermal synthesis of RGO/nano-structured cobalt sulphide composites , 2015, Nanotechnology.

[46]  Zhian Zhang,et al.  Freestanding Sulfur/3D Carbon Fiber Membrane Cathodes for Advanced Lithium–Sulfur Batteries , 2015 .

[47]  Yunhui Huang,et al.  Novel double-cathode configuration to improve the cycling stability of lithium–sulfur battery , 2015 .

[48]  Xiao Liang,et al.  A highly efficient polysulfide mediator for lithium–sulfur batteries , 2015, Nature Communications.

[49]  Tingzheng Hou,et al.  Strongly Coupled Interfaces between a Heterogeneous Carbon Host and a Sulfur‐Containing Guest for Highly Stable Lithium‐Sulfur Batteries: Mechanistic Insight into Capacity Degradation , 2014 .

[50]  Zhe Yuan,et al.  Hierarchical Free‐Standing Carbon‐Nanotube Paper Electrodes with Ultrahigh Sulfur‐Loading for Lithium–Sulfur Batteries , 2014 .

[51]  Dipan Kundu,et al.  Surface-enhanced redox chemistry of polysulphides on a metallic and polar host for lithium-sulphur batteries , 2014, Nature Communications.

[52]  Chun‐Sing Lee,et al.  Facile fabrication and electrochemical properties of high-quality reduced graphene oxide/cobalt sulfide composite as anode material for lithium-ion batteries , 2014 .

[53]  Yi Cui,et al.  Strong sulfur binding with conducting Magnéli-phase Ti(n)O2(n-1) nanomaterials for improving lithium-sulfur batteries. , 2014, Nano letters.

[54]  Zhichuan J. Xu,et al.  Encapsulating MWNTs into Hollow Porous Carbon Nanotubes: A Tube‐in‐Tube Carbon Nanostructure for High‐Performance Lithium‐Sulfur Batteries , 2014, Advanced materials.

[55]  Yi Cui,et al.  Improving lithium–sulphur batteries through spatial control of sulphur species deposition on a hybrid electrode surface , 2014, Nature Communications.

[56]  Jianming Zheng,et al.  Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures , 2014, Nature Communications.

[57]  Haegyeom Kim,et al.  Graphene for advanced Li/S and Li/air batteries , 2014 .

[58]  Arumugam Manthiram,et al.  A strategic approach to recharging lithium-sulphur batteries for long cycle life , 2013, Nature Communications.

[59]  Guang He,et al.  Tailoring porosity in carbon nanospheres for lithium-sulfur battery cathodes. , 2013, ACS nano.

[60]  Zhian Zhang,et al.  A simple SDS-assisted self-assembly method for the synthesis of hollow carbon nanospheres to encapsulate sulfur for advanced lithium–sulfur batteries , 2013 .

[61]  Guangyuan Zheng,et al.  Understanding the role of different conductive polymers in improving the nanostructured sulfur cathode performance. , 2013, Nano letters.

[62]  Shengbo Zhang,et al.  Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions , 2013 .

[63]  L. Nazar,et al.  New approaches for high energy density lithium-sulfur battery cathodes. , 2013, Accounts of chemical research.

[64]  Guangyuan Zheng,et al.  Nanostructured sulfur cathodes. , 2013, Chemical Society reviews.

[65]  Zhian Zhang,et al.  Electrochemical Impedance Spectroscopy Study of a Lithium/Sulfur Battery: Modeling and Analysis of Capacity Fading , 2013 .

[66]  Ajay Kapoor,et al.  A Review on Li-S Batteries as a High Efficiency Rechargeable Lithium Battery , 2013 .

[67]  Arumugam Manthiram,et al.  Self-weaving sulfur-carbon composite cathodes for high rate lithium-sulfur batteries. , 2012, Physical chemistry chemical physics : PCCP.

[68]  J. Coleman,et al.  Percolation scaling in composites of exfoliated MoS2 filled with nanotubes and graphene. , 2012, Nanoscale.

[69]  Shengbo Zhang,et al.  Effect of Discharge Cutoff Voltage on Reversibility of Lithium/Sulfur Batteries with LiNO3-Contained Electrolyte , 2012 .

[70]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[71]  Zhenghua Wang,et al.  Co9S8 nanotubes synthesized on the basis of nanoscale Kirkendall effect and their magnetic and electrochemical properties , 2010 .

[72]  R. Frost,et al.  Synthesis and Characterization of Cobalt Hydroxide, Cobalt Oxyhydroxide, and Cobalt Oxide Nanodiscs , 2010 .

[73]  W. Bauhofer,et al.  A review and analysis of electrical percolation in carbon nanotube polymer composites , 2009 .

[74]  K. Friedrich,et al.  Evaluation and visualization of the percolating networks in multi-wall carbon nanotube/epoxy composites , 2009 .

[75]  S. Hong,et al.  Enhanced electrical conductivity of nanocomposites containing hybrid fillers of carbon nanotubes and carbon black. , 2009, ACS applied materials & interfaces.

[76]  Yuriy V. Mikhaylik,et al.  Polysulfide Shuttle Study in the Li/S Battery System , 2004 .

[77]  S. Yomo.  Electrical resistivity of CoS2 in the paramagnetic phase , 1983 .

[78]  H. Behret,et al.  Electrocatalytic oxygen reduction with thiospinels and other sulphides of transition metals , 1975 .

[79]  R. J. Bouchard,et al.  Preparation and Electrical Properties of Some Thiospinels , 1965 .

[80]  A. Götte,et al.  Metall , 1897 .