Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review

Abstract Platinum is one of the precious metals with many applications, including in catalysis, electronic devices and jewelry. However, its limited resources are becoming depleted. To meet the future demand and conserve resources, it is necessary to process spent platinum-containing materials, such as catalysts, electronic scraps and used equipment. These materials are usually processed by pyro/hydrometallurgical processes consisting of thermal treatment followed by leaching, precipitation or solvent extraction. This paper reviews platinum leaching from such resources using acidic and alkaline solutions in the presence of oxidizing agents, such as nitric acid and hydrogen peroxide, sodium cyanide and iodide solutions. The results of the study are described with respect to the recovery of platinum and other metals under the optimized conditions of leaching with lixiviants. Previous studies have achieved platinum recovery using aqua regia and acidic solution in the presence of chlorine to produce platinum from spent catalysts on a commercial scale; however, the process generates toxic nitrogen oxide and chlorine gases. This paper reports the salient findings of efforts to replace the aqua regia with hydrogen peroxide in acidic solution, chloride salts, sodium cyanide and iodide solution to improve the economics of the existing processes and reduce the environmental pollution.

[1]  T. Plikas,et al.  The predictive control of furnace tapblock operation using CFD and PCA modeling , 2005 .

[2]  J. Yoo.  Metal recovery and rejuvenation of metal-loaded spent catalysts , 1998 .

[3]  B. Gates,et al.  Chemistry of catalytic processes , 1979 .

[4]  S. Aktaş,et al.  Towards environmentally safe recovery of platinum from scrap automotive catalytic converters , 2009 .

[5]  M. Arai,et al.  Activity, selectivity and stability of Ni and bimetallic Ni–Pt supported on zeolite Y catalysts for hydrogenation of acetophenone and its substituted derivatives , 2000 .

[6]  D. Tyson,et al.  Leaching Kinetics of Platinum and Palladium from Spent Automotive Catalysts , 1987 .

[7]  J. Hoffmann.  Recovering platinum-group metals from auto catalysts , 1988 .

[8]  M. Barakat,et al.  Recovery of platinum from spent catalyst , 2004 .

[9]  G. B. Atkinson,et al.  Recovery of platinum group metals from automobile catalysts -- Pilot plant operation , 1995 .

[10]  M. Yeh,et al.  Recovery of spent alumina-supported platinum catalyst and reduction of platinum oxide via plasma sintering technique , 2011 .

[11]  P. Brimblecombe,et al.  Equilibrium Partial Pressures, Thermodynamic Properties of Aqueous and Solid Phases, and Cl2 Production from Aqueous HCl and HNO3 and Their Mixtures , 1999 .

[12]  J. Afonso,et al.  Recovery of platinum from spent catalysts in a fluoride-containing medium , 2004 .

[13]  S. Ghosh,et al.  Bimetallic Pt–Ni nanoparticles can catalyze reduction of aromatic nitro compounds by sodium borohydride in aqueous solution , 2004 .

[14]  A. Dessler.  The Chemistry and Physics of Stratospheric Ozone , 2000 .

[15]  R. Farrauto,et al.  Selective catalytic oxidation of CO in H2: structural study of Fe oxide-promoted Pt/alumina catalyst , 2002 .

[16]  J. Afonso,et al.  Processing of spent platinum-based catalysts via fusion with potassium hydrogenosulfate. , 2010, Journal of hazardous materials.

[17]  G. Schreier,et al.  Separation of Ir, Pd and Rh from secondary Pt scrap by precipitation and calcination , 2003 .

[18]  P Schramel,et al.  Platinum-group elements: quantification in collected exhaust fumes and studies of catalyst surfaces. , 2000, The Science of the total environment.

[19]  S. Woo,et al.  Recovery of Platinum-Group Metals from Recycled Automotive Catalytic Converters by Carbochlorination , 2000 .

[20]  R. Hancock,et al.  A linear free-energy relation involving the formation constants of palladium(II) and platinum(II) , 1977 .

[21]  K. N. Han,et al.  Recovery of platinum and palladium from spent automobile catalytic converters by leaching with solutions containing halogen salts, ammonium and oxidants , 1995 .

[22]  W. M. Haynes.  CRC Handbook of Chemistry and Physics , 1990 .

[23]  M. Mahmoud.  Leaching platinum-group metals in a sulfuric acid/chloride solution , 2003 .

[24]  S. Sheibani,et al.  Ultra fast microwave-assisted leaching for recovery of platinum from spent catalyst , 2005 .

[25]  R. Mao,et al.  Effect of Zn loading of the Pt-Zn-HY trifunctional catalysts on the hydroisomerization of n-heptane , 2001 .

[26]  Mayur Patel,et al.  The recovery mechanism of platinum group metals from catalytic converters in spent automotive exhaust systems , 2000 .

[27]  B. E. Leach.  Applied industrial catalysis , 1983 .

[28]  Man-Seung Lee,et al.  Separation of Pt(IV) and Pd(II) from the loaded Alamine 336 by stripping , 2011 .

[29]  M. J. Weaver,et al.  Reduction Kinetics of Surface Rhodium Oxide by Hydrogen and Carbon Monoxide at Ambient Gas Pressures As Probed by Transient Surface-Enhanced Raman Spectroscopy , 1998 .

[30]  Hamid Reza Mortaheb,et al.  Kinetics of platinum extraction from spent reforming catalysts in aqua-regia solutions , 2009 .

[31]  Ricardo Pinedo,et al.  Recovery by hydrometallurgical extraction of the platinum-group metals from car catalytic converters , 2011 .

[32]  Milton E. Wadsworth,et al.  Gold dissolution and activation in cyanide solution: kinetics and mechanism , 2000 .

[33]  G. B. Atkinson,et al.  Cyanide leaching chemistry of platinum-group metals , 1994 .

[34]  K. Shams,et al.  Platinum recovery from a spent industrial dehydrogenation catalyst using cyanide leaching followed by ion exchange , 2004 .

[35]  J. Chen,et al.  A new technique for extraction of platinum group metals by pressure cyanidation , 2006 .

[36]  Z. Önsan,et al.  Hydrogen production by steam reforming of n-butane over supported Ni and Pt-Ni catalysts , 2004 .

[37]  T. Angelidis,et al.  Preliminary studies of platinum dissolution from a spent industrial catalyst , 1996 .

[38]  M. Baghalha,et al.  Factors affecting platinum extraction from used reforming catalysts in iodine solutions at temperatures up to 95 °C , 2009 .

[39]  J. Laserna,et al.  Mapping of platinum group metals in automotive exhaust three-way catalysts using laser-induced breakdown spectrometry. , 1999, Analytical chemistry.

[40]  T. Fujita,et al.  Leaching of Pt, Pd and Rh from Automotive Catalyst Residue in Various Chloride Based Solutions , 2006 .

[41]  G. Blanchard,et al.  New Generation of Rare Earth Compounds for Automotive Catalysis , 1996 .

[42]  J. Barbier,et al.  Influence of oxidizing and reducing treatments on the metal–metal interactions and on the activity for nitrate reduction of a Pt-Cu bimetallic catalyst , 2002 .

[43]  C. H. Bartholomew,et al.  Sulfur Poisoning of Metals , 1982 .

[44]  J. Bunt,et al.  The selective dissolution of alumina, cobalt and platinum from a calcined spent catalyst using different lixiviants , 2005 .

[45]  T. Angelidis.  Development of a Laboratory Scale Hydrometallurgical Procedure for the Recovery of Pt and Rh from Spent Automotive Catalysts , 2001 .

[46]  Andrea Colombo,et al.  Does Interfacial Charge Transfer Compete with Charge Carrier Recombination? A Femtosecond Diffuse Reflectance Investigation of TiO2 Nanoparticles , 1996 .

[47]  A. Burkin.  CHEMICAL HYDROMETALLURGY: THEORY AND PRINCIPLES , 2001 .

[48]  Larry A. Cramer,et al.  The extractive metallurgy of south africa’s platinum ores , 2001 .

[49]  D. Desmond.  HIGH-TEMPERATURE CYANIDE LEACHING OF PLATINUM-GROUP METALS FROM AUTOMOBILE CATALYSTS--LABORATORY TESTS , 1991 .

[50]  I. Kennedy.  Acid Soil and Acid Rain , 1992 .

[51]  G. B. Atkinson,et al.  High-temperature cyanide leaching of platinum-group metals from automobile catalysts-process development unit. Report of investigations/1992 , 1992 .

[52]  Shigeki Suzuki,et al.  Recovery of Platinum Group Metals at Nippon PGM Co., Ltd. , 2007 .