Structure-borne low-frequency noise from multi-span bridges: A prediction method and spatial distribution

Abstract Structure-borne noise from railway bridges at far-field points is an important indicator in environmental noise assessment. However, studies that predict structure-borne noise tend to model only single-span bridges, thus ignoring the sound pressure radiating from adjacent spans. To simulate the noise radiating from multi-span bridges induced by moving vehicles, the vibrations of a multi-span bridge are first obtained from a three-dimensional (3D) vehicle–track–bridge dynamic interaction simulation using the mode superposition method. A procedure based on the 2.5-dimensional (2.5D) boundary element method (BEM) is then presented to promote the efficiency of acoustical computation compared with the 3D BEM. The simulated results obtained from both the single-span and multi-span bridge models are compared with the measured results. The sound predictions calculated from the single-span model are accurate only for a minority of near-field points. In contrast, the sound pressures calculated from the multi-span bridge model match the measured results in both the time and frequency domains for all of the near-field and far-field points. The number of bridge spans required in the noise simulation is then recommended related to the distance between the track center and the field points of interest. The spatial distribution of multi-span structure-borne noise is also studied. The variation in sound pressure levels is insignificant along the length of the bridge, which validates the finding that the sound test section can be selected at an arbitrary plane perpendicular to the multi-span bridge.

[1]  Kiyoshi Nagakura,et al.  A Method for Prediction of Structure-borne Noise Radiated from Concrete Railway Viaducts , 2011 .

[2]  Xu Xie,et al.  Assessment on transient sound radiation of a vibrating steel bridge due to traffic loading , 2015 .

[3]  R. Citarella,et al.  Modal acoustic transfer vector approach in a FEM–BEM vibro-acoustic analysis , 2007 .

[4]  J. Forssén,et al.  The 2.5-dimensional equivalent sources method for directly exposed and shielded urban canyons. , 2007, The Journal of the Acoustical Society of America.

[5]  I Bartoli,et al.  A coupled SAFE-2.5D BEM approach for the dispersion analysis of damped leaky guided waves in embedded waveguides of arbitrary cross-section. , 2013, Ultrasonics.

[6]  Xun Zhang,et al.  Train-induced vibration and noise radiation of a prestressed concrete box-girder , 2013 .

[7]  David Thompson.  ON THE RELATIONSHIP BETWEEN WHEEL AND RAIL SURFACE ROUGHNESS AND ROLLING NOISE , 1996 .

[8]  Xiaozhen Li,et al.  Experimental research on noise emanating from concrete box-girder bridges on intercity railway lines , 2015 .

[9]  Qi Li,et al.  A 2.5-dimensional method for the prediction of structure-borne low-frequency noise from concrete rail transit bridges. , 2014, The Journal of the Acoustical Society of America.

[10]  David Thompson,et al.  A waveguide finite element and boundary element approach to calculating the sound radiated by railway and tram rails , 2009 .

[11]  Q. Li,et al.  Computer-aided Nonlinear Vehicle-bridge Interaction Analysis , 2010 .

[12]  He Zhang,et al.  Low-frequency noise radiation from traffic-induced vibration of steel double-box girder bridge , 2012 .

[13]  K. P. Waye,et al.  Evaluations of effects due to low frequency noise in a low demanding work situation , 2004 .

[14]  G. Di,et al.  Adjustment on subjective annoyance of low frequency noise by adding additional sound , 2011 .

[15]  R. Clough,et al.  Dynamics Of Structures , 1975 .

[16]  Rui Calçada,et al.  Track–ground vibrations induced by railway traffic: In-situ measurements and validation of a 2.5D FEM-BEM model , 2012 .

[17]  R. Rylander,et al.  THE PREVALENCE OF ANNOYANCE AND EFFECTS AFTER LONG-TERM EXPOSURE TO LOW-FREQUENCY NOISE , 2001 .

[18]  J. K. Hedrick,et al.  A Comparison of Alternative Creep Force Models for Rail Vehicle Dynamic Analysis , 1983 .

[19]  Peter Balazs,et al.  A 2.5D-Fourier-BEM model for vibrations in a tunnel running through layered anisotropic soil , 2012 .

[20]  D. Duhamel,et al.  SOUND PROPAGATION OVER NOISE BARRIERS WITH ABSORBING GROUND , 1998 .

[21]  D. J. Wu,et al.  Analysis of the dominant vibration frequencies of rail bridges for structure-borne noise using a power flow method , 2013 .

[22]  D. J. Wu,et al.  Concrete bridge-borne low-frequency noise simulation based on train-track-bridge dynamic interaction , 2012 .