The effect of amino-terminated hyperbranched polymers on the impact resistance of epoxy resins

[1]  C. Cui,et al.  Synthesis of core–shell particles based on hyperbranced polyester and zirconium slag nanoparticles and its influence on the impact resistance of epoxy resin thermosets , 2017 .

[2]  Qisheng Wu,et al.  The effect of hyperbranched polyester and zirconium slag nanoparticles on the impact resistance of epoxy resin thermosets , 2015 .

[3]  C. Cui,et al.  Synthesis and characterization of amino-terminated hyperbranched polymer and its effect on impact resistance of epoxy resin thermosets , 2015, Colloid and Polymer Science.

[4]  Jiachun Feng,et al.  Epoxy laminated composites reinforced with polyethyleneimine functionalized carbon fiber fabric: Mechanical and thermal properties , 2014 .

[5]  U. Sundararaj,et al.  Morphology and mechanical properties of nanostructured acrylic tri‐block‐copolymer modified epoxy , 2014 .

[6]  H. Horibe,et al.  One-Step Synthesis of Thermally Curable Hyperbranched Polymers by Addition–Fragmentation Chain Transfer Using Divinyl Monomers , 2014 .

[7]  A. Borriello,et al.  Hyperbranched polymers as modifiers of epoxy adhesives , 2013 .

[8]  R. Narayan,et al.  Synthesis and characterization of APTMS/melamine cured hyperbranched polyester-epoxy hybrid coatings , 2013 .

[9]  N. Karak,et al.  Glycerol based tough hyperbranched epoxy: Synthesis, statistical optimization and property evaluation , 2013 .

[10]  Xiaoyu Li,et al.  Novel epoxidized hyperbranched poly(phenylene oxide): Synthesis and application as a modifier for diglycidyl ether of bisphenol A , 2013 .

[11]  D. Hui,et al.  Epoxy clay nanocomposites ― processing, properties and applications: A review , 2013 .

[12]  M. Sangermano,et al.  Core/Shell PBA/PMMA‐PGMA Nanoparticles to Enhance the Impact Resistance of UV‐Cured Epoxy Systems , 2013 .

[13]  Sabu Thomas,et al.  In-situ Cure and Cure Kinetic Analysis of a Liquid Rubber Modified Epoxy Resin , 2012 .

[14]  X. Ramis,et al.  New aromatic–aliphatic hyperbranched polyesters with vinylic end groups of different length as modifiers of epoxy/anhydride thermosets , 2012 .

[15]  M. Abadyan,et al.  Fracture Toughness of a Hybrid Rubber Modified Epoxy. II. Effect of Loading Rate , 2012 .

[16]  M. A. Kouchakzadeh,et al.  Fracture toughness of a hybrid‐rubber‐modified epoxy. I. Synergistic toughening , 2012 .

[17]  Le Hoang Sinh,et al.  Improvements in thermal, mechanical, and dielectric properties of epoxy resin by chemical modification with a novel amino-terminated liquid-crystalline copoly(ester amide) , 2012 .

[18]  M. Sangermano,et al.  Impact resistance enhancement by adding epoxy ended hyperbranched polyester to DGEBA photocured thermosets , 2012 .

[19]  Wenying Zhou,et al.  Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB) , 2012 .

[20]  Xing-hong Zhang,et al.  Thermosets with core–shell nanodomain by incorporation of core crosslinked star polymer into epoxy resin , 2011 .

[21]  D. Srivastava,et al.  Toughened cycloaliphatic epoxy resin for demanding thermal applications and surface coatings , 2009 .

[22]  F. Bates,et al.  Strain rate effect on toughening of nano-sized PEP–PEO block copolymer modified epoxy , 2009 .

[23]  I. Mondragon,et al.  Molecular dynamics of an epoxy resin modified with an epoxidized poly(styrene-butadiene) linear block copolymer during cure and microphase separation processes , 2009 .

[24]  Sabu Thomas,et al.  PVT behavior of thermoplastic poly(styrene-co-acrylonitrile)-modified epoxy systems: relating polymerization-induced viscoelastic phase separation with the cure shrinkage performance. , 2008, The journal of physical chemistry. B.

[25]  Soojin Park,et al.  Fracture toughness of difunctional epoxy resin/thermally latent initiator system modified with polyesters , 2008 .

[26]  K. Caba,et al.  Mechanical properties–morphology relationships in nano-/microstructured epoxy matrices modified with PEO–PPO–PEO block copolymers , 2007 .

[27]  T. Aminabhavi,et al.  Hyperbranched polyesters: synthesis, characterization, and molecular simulations. , 2007, The journal of physical chemistry. B.

[28]  Sabu Thomas,et al.  Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin – Effects of a liquid rubber inclusion , 2007 .

[29]  Xinli Jing,et al.  Preparation of polystyrene/polyaniline core/shell structured particles and their epoxy‐based conductive composites , 2007 .

[30]  K. Caba,et al.  Kinetics and Morphology of an Epoxy Resin Modified with PEO-PPO-PEO Block Copolymers , 2006 .

[31]  Xianzhi Guo,et al.  Studies of the properties of a thermosetting epoxy modified with block copolymers , 2005 .

[32]  N. Gabilondo,et al.  Cure kinetics of epoxy systems modified with block copolymers , 2004 .

[33]  Yingfeng Yu,et al.  Viscoelastic effects on the phase separation in thermoplastics modified cyanate ester resin , 2004 .

[34]  D. Ratna,et al.  Nanocomposites based on a combination of epoxy resin, hyperbranched epoxy and a layered silicate , 2003 .

[35]  Yingfeng Yu,et al.  Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin , 2003 .

[36]  M. Iji,et al.  Flame retardancy and heat resistance of phenol-biphenylene-type epoxy resin compound modified with benzoguanamine , 2003 .

[37]  D. Raghavan,et al.  Chemically Functionalized Clay Epoxy Nanocomposites for Aerospace Applications , 2003 .

[38]  M. Ochi,et al.  Effect on the toughness and adhesion properties of epoxy resin modified with silyl-crosslinked urethane microsphere , 2002 .

[39]  D. Ratna,et al.  Thermomechanical Properties and Morphology of Blends of a Hydroxy-Functionalized Hyperbranched Polymer and Epoxy Resin , 2001 .

[40]  J. Jang,et al.  Curing behavior of tetrafunctional epoxy resin/hyperbranched polymer system , 2001 .

[41]  C. Marieta,et al.  Rheokinetic variations during curing of a tetrafunctional epoxy resin modified with two thermoplastics , 2001 .

[42]  K. Suh,et al.  Preparation and physical properties of rubber‐modified epoxy resin using poly(urethane acrylate)/poly(glycidyl methacrylate‐co‐acrylonitrile) core‐shell composite particles , 1997 .

[43]  Chun-Shan Wang,et al.  Aminosiloxane‐modified epoxy resins as microelectronic encapsulants , 1995 .

[44]  Jean M. J. Fréchet,et al.  One-step synthesis of hyperbranched dendritic polyesters , 1991 .

[45]  D. Egan,et al.  Elastomer-Modified Epoxy Resins in Coatings Applications , 1983 .