论文信息 - First 3D-printed complex inorganic polycrystalline scintillator - 字舞流文

First 3D-printed complex inorganic polycrystalline scintillator

YAG:Ce scintillating material was obtained using 3D printing for the first time. A green body was printed using a stereophotolithography approach from co-precipitated powders and then sintered at 1600 °C in air to afford translucent ceramics. The scintillation light yield using 5.5 MeV α-particle excitation was more than 60% higher than that of the reference YAG:Ce single crystal.

A. E. Dosovitskiy | M. V. Korjik | G. Dosovitskiy | P. Evdokimov | V. Putlayev | A. Fedorov | M. Korjik | Andrei Fedorov | A. Borisevich | V. Mechinsky | P. V. Karpyuk | P. V. Evdokimov | D. E. Kuznetsova | V. I. Putlayev | G. Dosovitskiy | P. Karpyuk | A. Borisevich | D. Kuznetsova | A. Dosovitskiy | V. Mechinsky | Mikhail Korjik

[1] A. Wojtowicz,et al. Luminescence properties of Ce-activated YAG optical ceramic scintillator materials , 1997 .

[2] S. Payne,et al. Homogeneity of Gd-based garnet transparent ceramic scintillators for gamma spectroscopy , 2012 .

[3] A. Sleight,et al. True composition and structure of hexagonal "YAlO3", actually Y3Al3O8CO3. , 2015, Inorganic chemistry.

[4] J. H. Lee,et al. Characterization of yttrium aluminate garnet precursors synthesized via precipitation using ammonium bicarbonate as the precipitant , 2000 .

[5] D. Winarski,et al. Physical and optical properties of Ce:YAG nanophosphors and transparent ceramics and observation of novel luminescence phenomenon , 2017 .

[6] P. Lecoq,et al. Inorganic Scintillators for Detector Systems , 2017 .

[7] K. MacKenzie,et al. Evolution of crystalline aluminates from hybrid gel-derived precursors studied by XRD and multinuclear solid-state MAS NMR: II. Yttrium–aluminium garnet, Y3Al5O12 , 1999 .

[8] Dong Xu,et al. Direct inkjet printing of miniaturized luminescent YAG:Er3+ from sol-gel precursor , 2017 .

[9] D. Eisert,et al. Ceramic Phosphors for Light Conversion in LEDs , 2013 .

[10] Stephen A. Payne,et al. Expanded phase stability of Gd-based garnet transparent ceramic scintillators , 2014 .

[11] Yan Lin Aung,et al. Ceramic laser materials , 2008 .

[12] John W. Halloran,et al. Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization , 2016 .

[13] K. Petermann,et al. Potentiality of Ceramic Scintillators: General Considerations and YAG-Yb Optical Ceramics Performance , 2010, IEEE Transactions on Nuclear Science.

[14] V. Lupei,et al. Nd:YAG at its 50th anniversary: Still to learn , 2016 .

[15] Peter Greil,et al. Additive Manufacturing of Ceramic‐Based Materials , 2014 .

[16] P. Evdokimov,et al. Fabrication of osteoconductive Ca3–xM2x(PO4)2 (M = Na, K) calcium phosphate bioceramics by stereolithographic 3D printing , 2017, Inorganic Materials.

[17] A. Vedda,et al. Luminescence and scintillation properties of YAG:Ce single crystal and optical ceramics , 2007 .

[18] Y. Fujimoto,et al. Properties of transparent Ce:YAG ceramic phosphors for white LED , 2011 .

[19] P. Evdokimov,et al. Additive technologies for making highly permeable inorganic materials with tailored morphological architectonics for medicine , 2015, Inorganic Materials.

[20] M. Layani,et al. Three-dimensional printing of scintillating materials. , 2014, The Review of scientific instruments.