Modelling distribution of evaporating CO2 in parallel minichannels

[1]  Michael W. Collins,et al.  Single-phase heat transfer in microchannels The importance of scaling effects , 2009 .

[2]  Brian Elmegaard,et al.  Modelling refrigerant distribution in microchannel evaporators , 2009 .

[3]  James E. Braun,et al.  A hybrid method for refrigerant flow balancing in multi-circuit evaporators: Upstream versus downstream flow control , 2009 .

[4]  P. Hrnjak,et al.  Flow Boiling Heat Transfer, Pressure Drop, and Flow Pattern for CO2 in a 3.5mm Horizontal Smooth Tube , 2009 .

[5]  James E. Braun,et al.  Evaluation of a hybrid method for refrigerant flow balancing in multi-circuit evaporators , 2009 .

[6]  S. Garimella,et al.  A composite heat transfer correlation for saturated flow boiling in small channels , 2009 .

[7]  Kwang-Il Choi,et al.  Two-phase pressure drop during CO2 vaporization in horizontal smooth minichannels , 2008 .

[8]  Kwang-Il Choi,et al.  Boiling heat transfer of R-22, R-134a, and CO2 in horizontal smooth minichannels , 2007 .

[9]  Reinhard Radermacher,et al.  Refrigerant Distribution in Minichannel Evaporator Manifolds , 2007 .

[10]  Philippe Marty,et al.  Friction losses and heat transfer of single-phase flow in a mini-channel , 2007 .

[11]  Predrag Stojan Hrnjak,et al.  CO2 and R410A flow boiling heat transfer, pressure drop, and flow pattern at low temperatures in a horizontal smooth tube , 2007 .

[12]  S. Kandlikar A Roadmap for Implementing Minichannels in Refrigeration and Air-Conditioning Systems—Current Status and Future Directions , 2006 .

[13]  John R. Thome,et al.  State-of-the-art of two-phase flow and flow boiling heat transfer and pressure drop of CO2 in macro- and micro-channels. , 2005 .

[14]  Clark W. Bullard,et al.  Header design tradeoffs in microchannel evaporators , 2004 .

[15]  Jostein Pettersen,et al.  Flow vaporization of CO2 in microchannel tubes , 2004 .

[16]  Björn Palm,et al.  Experimental investigation of single-phase convective heat transfer in circular microchannels , 2004 .

[17]  Jostein Pettersen,et al.  Fundamental process and system design issues in CO2 vapor compression systems , 2004 .

[18]  P. Hrnjak,et al.  Developing Adiabatic Two Phase Flow in Headers—Distribution Issue in Parallel Flow Microchannel Heat Exchangers , 2004 .

[19]  Piotr A. Domanski,et al.  Effects of Non-Uniform Refrigerant and Air Flow Distributions on Finned- Tube Evaporator Performance , 2003 .

[20]  Clark W. Bullard,et al.  Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchangers , 2002 .

[21]  Piotr A. Domanski,et al.  Simulation of an Evaporator with Nonuniform One-Dimensional Air Distribution | NIST , 1991 .

[22]  M. Chwalowski,et al.  Verification of evaporator computer models and analysis of performance of an evaporator coil , 1989 .

[23]  H. Müller-Steinhagen,et al.  A simple friction pressure drop correlation for two-phase flow in pipes , 1986 .

[24]  L. Friedel Improved Friction Pressure Drop Correlation for Horizontal and Vertical Two-Phase Pipe Flow , 1979 .

[25]  A. Dukler,et al.  Frictional pressure drop in two‐phase flow: A. A comparison of existing correlations for pressure loss and holdup , 1964 .

[26]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .