Investigation on the mechanism of aminosilane-mediated bonding of thermoplastics and poly(dimethylsiloxane).

A possible mechanism for the aminosilane-mediated room-temperature (RT) bonding of thermoplastics and poly(dimethylsiloxane) (PDMS) is presented. The plasma-activated thermoplastic or PDMS substrates were modified with alkoxy silanes having different organo functional groups, and their bonding characteristics were studied. Manual peeling tests revealed that strong bonding was realized only when the silane had a free amino group and at least two alkoxy groups on the silicon. Silanization was carried out in both aqueous and anhydrous conditions; bonding occurred readily at RT in the former case, but a longer incubation time or a higher temperature was needed for the latter. The presence of the silane on the surface was confirmed by contact-angle measurements and UV spectrophotometric, attenuated total reflectance infrared spectroscopic (ATR-IR) and X-ray photoelectron spectroscopic (XPS) analyses. In the case where the aminosilane was deposited from aqueous solution, the amino functionality of the silane-catalyzed siloxane bond formation between the silanol on the modified thermoplastic surface and the silanol of the plasma-activated PDMS. In the case of anhydrous phase deposition, the aminosilane first catalyzed the hydrolysis of the ethoxy groups on the silicon, and then, catalyzed the condensation between the silanol groups of both materials. Shelf life tests of the modified thermoplastics showed that the aminosilane was stable over 2 weeks, and that bonding occurred at RT when the substrates were soaked in water before bonding.

[1]  Rajeev J Ram,et al.  Plastic-PDMS bonding for high pressure hydrolytically stable active microfluidics. , 2009, Lab on a chip.

[2]  T. Nishida,et al.  Chemical-assisted bonding of thermoplastics/elastomer for fabricating microfluidic valves. , 2011, Analytical chemistry.

[3]  S. Soper,et al.  Simple room temperature bonding of thermoplastics and poly(dimethylsiloxane). , 2011, Lab on a chip.

[4]  Jeffrey D Zahn,et al.  Irreversible, direct bonding of nanoporous polymer membranes to PDMS or glass microdevices. , 2010, Lab on a chip.

[5]  Yoon-Kyoung Cho,et al.  Elastomeric membrane valves in a disc. , 2011, Lab on a chip.

[6]  Angeliki Tserepi,et al.  A low temperature surface modification assisted method for bonding plastic substrates , 2008 .

[7]  Nae Yoon Lee,et al.  A facile route for irreversible bonding of plastic-PDMS hybrid microdevices at room temperature. , 2010, Lab on a chip.

[8]  D. Leyden,et al.  The role of amine structure on catalytic activity for silylation reactions with Cab-O-Sil , 1988 .

[9]  M. Mowlem,et al.  Chemically resistant microfluidic valves from Viton® membranes bonded to COC and PMMA. , 2011, Lab on a chip.

[10]  Vincent T. Remcho,et al.  urface modification-assisted bonding of polymer-based microfluidic devices , 2009 .

[11]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[12]  J. Koenig,et al.  Structure and adsorption characteristics of silane coupling agents on silica and E-glass fiber; dependence on pH , 1984 .

[13]  R. Silverstein.  Spectrophotometric Determination of Primary, Secondary, and Tertiary Fatty Amines in Aqueous Solution. , 1963 .

[14]  White,et al.  Reaction of (3-Aminopropyl)dimethylethoxysilane with Amine Catalysts on Silica Surfaces. , 2000, Journal of colloid and interface science.

[15]  S. Tokura,et al.  Surface modification of nonporous glass beads with chitosan and their adsorption property for transition metal ions , 2002 .

[16]  G. Whitesides.  The origins and the future of microfluidics , 2006, Nature.

[17]  Mojun Zhu,et al.  How to prepare reproducible, homogeneous, and hydrolytically stable aminosilane-derived layers on silica. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[18]  Yoon-Kyoung Cho,et al.  Versatile method for bonding hard and soft materials , 2012 .

[19]  Matthew C. Mowlem,et al.  Characterisation of an irreversible bonding process for COC–COC and COC–PDMS–COC sandwich structures and application to microvalves , 2011 .

[20]  J. Koenig,et al.  Molecular Structure of an Aminosilane Coupling Agent as Influenced by Carbon Dioxide in Air, pH, and Drying Conditions , 1983 .