Strength-toughness combination in nickel matrix composites reinforced by hybrid graphene nanoplatelets-titanium diboride

[1]  Chao He,et al.  Characterization on Crack Initiation and Early Propagation Region of Nickel-Based Alloys in Very High Cycle Fatigue , 2022, Materials.

[2]  Xin Lin,et al.  Microstructure and Mechanical Properties of Y2o3 Strengthened Inconel 625 Alloy Fabricated by Selective Laser Melting , 2022, SSRN Electronic Journal.

[3]  Huijun Kang,et al.  Ultrasound-assisted dispersion of TiB2 nanoparticles in 7075 matrix hybrid composites , 2022, Materials Science and Engineering: A.

[4]  Zhixin Chen,et al.  Microstructure, mechanical and thermal properties of ultrafine-grained Al2024–TiC-GNPs nanocomposite , 2022, Materials Science and Engineering: A.

[5]  O. Adesina,et al.  Microstructure and Mechanical Properties of Spark Plasma-Sintered Graphene-Reinforced Inconel 738 Low Carbon Superalloy , 2021, Metallurgical and Materials Transactions A.

[6]  Y. Liu,et al.  In-situ grown few-layer graphene reinforced Ni matrix composites with simultaneously enhanced strength and ductility , 2021, Materials Science and Engineering: A.

[7]  Zhengyi Jiang,et al.  Synergistic effects of TiC and graphene on the microstructure and tribological properties of Al2024 matrix composites , 2021, Advanced Powder Technology.

[8]  R. Tao,et al.  Synergistic strengthening and toughening of copper coated graphene nanoplates and in situ nanoparticles reinforced AA6111 composites , 2021, Materials Science and Engineering: A.

[9]  Qun Yu,et al.  In-situ hybrid Cr3C2 and γ′-Ni3(Al, Cr) strengthened Ni matrix composites: Microstructure and enhanced properties , 2021, Materials Science and Engineering: A.

[10]  Tijun Chen,et al.  Fabrication of graphene nanoplatelets reinforced Mg matrix composites via powder thixoforging , 2021 .

[11]  N. Zhao,et al.  Simultaneously enhanced strength and ductility of Al matrix composites through the introduction of intragranular nano-sized graphene nanoplates , 2021, Composites Part B: Engineering.

[12]  R. Gupta,et al.  Enhancement of the mechanical properties of graphene nanoplatelet (GNP) reinforced nickel matrix nanocomposites , 2021 .

[13]  R. Banerjee,et al.  Strengthening Effects of Multi-walled Carbon Nanotubes Reinforced Nickel Matrix Nanocomposites , 2021 .

[14]  Mabao Liu,et al.  Fabricating graphene nanoplatelets/nickel composites of balanced strength and ductility , 2021 .

[15]  N. Hu,et al.  Synergistic strengthening effect of titanium matrix composites reinforced by graphene oxide and carbon nanotubes , 2021 .

[16]  M. Gupta,et al.  Progress in research on hybrid metal matrix composites , 2020 .

[17]  Satnam Singh,et al.  Dry Sliding Wear Performance of Ni–SiC Composites Developed Through an In Situ Microwave Casting Process , 2020 .

[18]  M. Qian,et al.  Microstructure, tensile properties and deformation behaviors of aluminium metal matrix composites co-reinforced by ex-situ carbon nanotubes and in-situ alumina nanoparticles , 2020 .

[19]  O. Kurapova,et al.  Fabrication of nickel-graphene composites with superior hardness , 2020 .

[20]  Ting Xu,et al.  Effects of TiB2 Particles Content on Microstructure, Mechanical Properties and Tribological Properties of Ni-Based Composite Coatings Reinforced with TiB2 Particles by Laser Cladding , 2020, Coatings.

[21]  K. Song,et al.  Synergistic strengthening effect of carbon nanotubes (CNTs) and titanium diboride (TiB2) microparticles on mechanical properties of copper matrix composites , 2020 .

[22]  N. Zhao,et al.  Synergistic strengthening effect of in-situ synthesized WC1-x nanoparticles and graphene nanosheets in copper matrix composites , 2020, Composites Part A: Applied Science and Manufacturing.

[23]  A. Dong,et al.  An enhanced strength Ni matrix composite reinforced by a 3D network structure of TiN nano-particles , 2020, Materials & Design.

[24]  Wenshu Yang,et al.  Effect of hot extrusion temperature on graphene nanoplatelets reinforced Al6061 composite fabricated by pressure infiltration method , 2020, Carbon.

[25]  N. Zhao,et al.  Microstructure and properties of copper coated graphene nanoplates reinforced Al matrix composites developed by low temperature ball milling , 2020, Carbon.

[26]  Faming Zhang,et al.  High strength and high ductility in nickel matrix nanocomposites reinforced by carbon nanotubes and onion-like-carbon hybrid reinforcements , 2020 .

[27]  Yi-long Liang,et al.  The microstructures and mechanical properties of graphene-reinforced titanium matrix composites , 2020, Journal of Alloys and Compounds.

[28]  B. Lu,et al.  Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing , 2020 .

[29]  Hua-ming Wang,et al.  Microstructure and Mechanical Performance of Graphene Nanosheets Reinforced Nickel-Based Superalloy FGH95 Composite , 2020, Nanomaterials.

[30]  X. Yan,et al.  Study on the Measurement of Stress in the Surface of Selective Laser Melting Forming Parts Based on the Critical Refraction Longitudinal Wave , 2019, Coatings.

[31]  E. Çevik,et al.  Microstructure and synergistic reinforcing activity of GNPs-B4C dual-micro and nano supplements in Al-Si matrix composites , 2019, Journal of Alloys and Compounds.

[32]  V. Trembošová,et al.  Effect of graphene oxide and friction stir processing on microstructure and mechanical properties of Al5083 matrix composite , 2019, Materials Research Express.

[33]  Bing Li,et al.  Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles , 2019, Materials Science and Engineering: A.

[34]  M. T. Parizi,et al.  Synergetic effect of GNPs and MgOs on the mechanical properties of Mg–Sr–Ca alloy , 2019, Materials Science and Engineering: A.

[35]  C. Shi,et al.  Synergistic strengthening effect of alumina anchored graphene nanosheets hybrid structure in aluminum matrix composites , 2019, Fullerenes, Nanotubes and Carbon Nanostructures.

[36]  Xiaofeng Chen,et al.  Interface interaction and synergistic strengthening behavior in pure copper matrix composites reinforced with functionalized carbon nanotube-graphene hybrids , 2019, Carbon.

[37]  G. Ji,et al.  Interface-induced strain hardening of graphene nanosheet/aluminum composites , 2019, Carbon.

[38]  Haitao Zhou,et al.  Graphene nanosheets‐Inconel 718 nanocomposites fabricated by spark plasma sintering of in‐situ grown vertically standing graphene nanosheets‐Inconel 718 powders , 2019, Micro & Nano Letters.

[39]  Di Zhang,et al.  Tailoring the structure and mechanical properties of graphene nanosheet/aluminum composites by flake powder metallurgy via shift-speed ball milling , 2018, Composites Part A: Applied Science and Manufacturing.

[40]  Jun Zhou,et al.  The Fabrication and Characterization of a TiB2/Ni Composite Using Spark Plasma Sintering , 2018, Transactions of the Indian Institute of Metals.

[41]  Y. Liu,et al.  Control of the microstructure and mechanical properties of electrodeposited graphene/Ni composite , 2018, Materials Science and Engineering: A.

[42]  Baode Sun,et al.  Microstructure evolution and properties of graphene nanoplatelets reinforced aluminum matrix composites , 2018, Materials Characterization.

[43]  Jinlong Jiang,et al.  In-situ fabrication of graphene-nickel matrix composites , 2018, Materials Letters.

[44]  Jun Zhou,et al.  Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect , 2018 .

[45]  S. Moheimani,et al.  An Overview of Key Challenges in the Fabrication of Metal Matrix Nanocomposites Reinforced by Graphene Nanoplatelets , 2018 .

[46]  C. Shi,et al.  An approach for fabricating Ni@graphene reinforced nickel matrix composites with enhanced mechanical properties , 2018 .

[47]  Xuesong Zhang,et al.  Recent advances in the development of aerospace materials , 2018 .

[48]  Zhao-hui Wang,et al.  Ultra-high strengthening efficiency of graphene nanoplatelets reinforced magnesium matrix composites , 2018 .

[49]  O. Mamat,et al.  Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review , 2018 .

[50]  X. Zhang,et al.  Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network. , 2017, Nanoscale.

[51]  M. Sarfraz,et al.  Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites , 2017 .

[52]  K. Ameyama,et al.  Enhanced mechanical properties of Al5083 alloy with graphene nanoplates prepared by ball milling and hot extrusion , 2016 .

[53]  S. Du,et al.  Effects of graphene content on the microstructure and properties of copper matrix composites , 2016 .

[54]  Xingtai Zhou,et al.  Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiCNP Composites Prepared by a Powder Metallurgy Route , 2015, Acta Metallurgica Sinica (English Letters).

[55]  R. Banerjee,et al.  Excellent strength–ductility combination in nickel-graphite nanoplatelet (GNP/Ni) nanocomposites , 2015 .

[56]  Junha Shin,et al.  Strengthening behavior of few-layered graphene/aluminum composites , 2015 .

[57]  Chao Zhao.  Enhanced strength in reduced graphene oxide/nickel composites prepared by molecular-level mixing for structural applications , 2015 .

[58]  X. M. Zhang,et al.  Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles , 2015 .

[59]  R. Banerjee,et al.  Influence of spark plasma sintering (SPS) processing parameters on microstructure and mechanical properties of nickel , 2014 .

[60]  Jaimie Tiley,et al.  Strength versus ductility in carbon nanotube reinforced nickel matrix nanocomposites , 2014 .

[61]  Woo Jin Kim,et al.  The effect of the addition of multiwalled carbon nanotubes on the uniform distribution of TiC nanoparticles in aluminum nanocomposites , 2014 .

[62]  A. Simchi,et al.  Fabrication, characterization and mechanical properties of hybrid composites of copper using the nanoparticulates of SiC and carbon nanotubes , 2013 .

[63]  S. Han,et al.  Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes , 2013 .

[64]  T. Langdon,et al.  Microstructure and strength of severely deformed fcc metals , 2007 .

[65]  R. Arsenault,et al.  Dislocation generation due to differences between the coefficients of thermal expansion , 1986 .