Analyzing the Design Parameters and Their Influence on the Tensile Strength of Composite Layers using Taguchi Technique

[1]  Y. Bhalerao,et al.  Multi-objective optimization of carbon/glass hybrid composites with newly developed resin (NDR) using gray relational analysis , 2020 .

[2]  G. Lu,et al.  Tensile failure of fibre-metal-laminates made of titanium and carbon-fibre/epoxy laminates , 2019 .

[3]  R. Eslami‐Farsani,et al.  The effect of surface modified nanoclay on the interfacial and mechanical properties of basalt fiber metal laminates , 2019, Thin-Walled Structures.

[4]  Y. Bhalerao,et al.  Optimization of dynamic properties of hybrid composite shaft with newly developed resin (NDR) using grey relational analysis , 2019, International Journal of Structural Integrity.

[5]  R. Nayak,et al.  Improvement of mechanical properties of hybrid composites through interply rearrangement of glass and carbon woven fabrics for marine application , 2019, Composites Part B: Engineering.

[6]  Yi Luo,et al.  Mechanical properties of a novel fiber metal laminate based on a carbon fiber reinforced Zn-Al alloy composite , 2019, Materials Science and Engineering: A.

[7]  Lokman Gemi.  Investigation of the effect of stacking sequence on low velocity impact response and damage formation in hybrid composite pipes under internal pressure. A comparative study , 2018, Composites Part B: Engineering.

[8]  S. Monteiro,et al.  Comparative tensile strength analysis between epoxy composites reinforced with curaua fiber and glass fiber , 2018, Journal of Materials Research and Technology.

[9]  Mehdi Kalantari,et al.  Multi-objective robust optimization of multi-directional carbon/glass fibre-reinforced hybrid composites with manufacture related uncertainties under flexural loading , 2017 .

[10]  S. Monteiro,et al.  Comparison between tensile behavior of epoxy and polyester matrix composites reinforced with eucalyptus fibers , 2017 .

[11]  Rongjie Yang,et al.  The characterization of DOPO/MMT nanocompound and its effect on flame retardancy of epoxy resin , 2017 .

[12]  K. Pickering,et al.  A review of recent developments in natural fibre composites and their mechanical performance , 2016 .

[13]  Mehdi Kalantari,et al.  Multi-objective robust optimisation of unidirectional carbon/glass fibre reinforced hybrid composites under flexural loading , 2016 .

[14]  J. Song.  Pairing effect and tensile properties of laminated high-performance hybrid composites prepared using carbon/glass and carbon/aramid fibers , 2015 .

[15]  N. M. Raju,et al.  Tribological analysis of nano clay/epoxy/glass fiber by using Taguchi’s technique , 2015 .

[16]  S. Biswas,et al.  Physical, mechanical, and water absorption behavior of coir/glass fiber reinforced epoxy based hybrid composites , 2014 .

[17]  H. Shon,et al.  Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers , 2014 .

[18]  M. Jawaid,et al.  Bamboo fibre reinforced biocomposites: A review , 2012 .

[19]  D.S.Chavan,et al.  Investigation of Composite Torsion Shaft for Static Structural Analysis Using Finite Element Analysis. , 2012 .

[20]  Joy M. Stickel,et al.  Glass Fiber‐Reinforced Composites: From Formulation to Application , 2012 .

[21]  Sagar D. Patil,et al.  Investigation of Composite Torsion Shaft for Torsional Buckling Analysis using Finite Element Analysis. , 2012 .

[22]  C. Hill,et al.  Silane coupling agents used for natural fiber/polymer composites: A review , 2010 .

[23]  M. Misra,et al.  The effect of silane treated-and untreated-talc on the mechanical and physico-mechanical properties of poly(lactic acid)/newspaper fibers/talc hybrid composites , 2007 .

[24]  Debra J. Carr,et al.  Modelling of the energy absorption by polymer composites upon ballistic impact , 2000 .

[25]  Dai Gil Lee,et al.  Impact energy absorption characteristics of glass fiber hybrid composites , 1999 .

[26]  N. Saha,et al.  Tensile behaviour of unidirectional polyethylene-glass fibres/PMMA hybrid composite laminates , 1996 .