Emerging Applications of Additive Manufacturing in Biosensors and Bioanalytical Devices

The progress of additive manufacturing (AM), known as 3D‐printing, has initiated a revolution in the new generation of biosensors and bioanalytical devices in recent years. The advancement in the resolution of AM has enabled the microfabrication of the architectures of electrodes and sensing layers for high‐performance sensing. Diversiform printable materials, including biocompatible materials, polymers, various gels and metals, have enormously broadened the horizon in sensors and analytical devices for both research and commercial purposes. The considerable shortening of time and cost in sensor prototyping and fabrication has been reported and various highly customizable biosensing platforms and devices are under development. Herein, the most recent studies on the applications of AM in biosensors and bioanalytical devices are summarized with the aim to provide a panorama of emerging 3D‐printing strategies for sensor design and bioanalytical device fabrication.

[1]  Aleksandr Ovsianikov,et al.  Functional 3D Printing for Microfluidic Chips , 2019, Advanced Materials Technologies.

[2]  C. Stinespring,et al.  Direct Ink Writing of Graphene-Based Solutions for Gas Sensing , 2019, ACS Applied Nano Materials.

[3]  Ali Khademhosseini,et al.  Three-dimensional printing of metals for biomedical applications , 2019, Materials today. Bio.

[4]  Michael J. Beauchamp,et al.  3D Printed Microfluidic Devices for Microchip Electrophoresis of Preterm Birth Biomarkers. , 2019, Analytical chemistry.

[5]  Martin Pumera,et al.  Three-dimensionally printed electrochemical systems for biomedical analytical applications , 2019, Current Opinion in Electrochemistry.

[6]  Sepehr Nesaei,et al.  Micro additive manufacturing of glucose biosensors: A feasibility study. , 2018, Analytica chimica acta.

[7]  D. Kalaskar,et al.  Stereolithography , 2018, 3D Printing.

[8]  Martin Pumera,et al.  Additive manufacturing of electrochemical interfaces: Simultaneous detection of biomarkers , 2018, Applied Materials Today.

[9]  James F Rusling,et al.  3D-Printed Biosensor Arrays for Medical Diagnostics , 2018, Micromachines.

[10]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[11]  Yuting Zhao,et al.  A Nanozyme- and Ambient Light-Based Smartphone Platform for Simultaneous Detection of Dual Biomarkers from Exposure to Organophosphorus Pesticides. , 2018, Analytical chemistry.

[12]  Martin Pumera,et al.  3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis. , 2018, Analytical chemistry.

[13]  Yue Dong,et al.  A 3-D-Printed Integrated PCB-Based Electrochemical Sensor System , 2018, IEEE Sensors Journal.

[14]  Niklas Sandler,et al.  3D printed UV light cured polydimethylsiloxane devices for drug delivery , 2017, International journal of pharmaceutics.

[15]  Yang Song,et al.  Nanozyme-Mediated Dual Immunoassay Integrated with Smartphone for Use in Simultaneous Detection of Pathogens. , 2017, ACS applied materials & interfaces.

[16]  Cyro L. S. Chagas,et al.  3D printing of microfluidic devices with embedded sensing electrodes for generating and measuring the size of microdroplets based on contactless conductivity detection , 2017 .

[17]  Nahal Aliheidari,et al.  3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites , 2017 .

[18]  Chee Kai Chua,et al.  Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review , 2017 .

[19]  Dan Du,et al.  A 3D-Printed, Portable, Optical-Sensing Platform for Smartphones Capable of Detecting the Herbicide 2,4-Dichlorophenoxyacetic Acid. , 2017, Analytical chemistry.

[20]  Samar Damiati,et al.  Acoustic and hybrid 3D-printed electrochemical biosensors for the real-time immunodetection of liver cancer cells (HepG2). , 2017, Biosensors & bioelectronics.

[21]  Ju Young Kim,et al.  3D printable composite dough for stretchable, ultrasensitive and body-patchable strain sensors. , 2017, Nanoscale.

[22]  Tianyu Liu,et al.  3D printed functional nanomaterials for electrochemical energy storage , 2017 .

[23]  E. Toyserkani,et al.  Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes , 2017 .

[24]  Malcolm Xing,et al.  Skin‐Inspired Multifunctional Autonomic‐Intrinsic Conductive Self‐Healing Hydrogels with Pressure Sensitivity, Stretchability, and 3D Printability , 2017, Advanced materials.

[25]  Sijun Liu,et al.  Ultrastretchable and Self-Healing Double-Network Hydrogel for 3D Printing and Strain Sensor. , 2017, ACS applied materials & interfaces.

[26]  Hiroki Ota,et al.  3D Printed "Earable" Smart Devices for Real-Time Detection of Core Body Temperature. , 2017, ACS sensors.

[27]  Kyo Sang Choi,et al.  A novel means of fabricating microporous structures for the dielectric layers of capacitive pressure sensor , 2017 .

[28]  Quankang Wang,et al.  A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel , 2017 .

[29]  Pekka Pursula,et al.  3D-Printable Bioactivated Nanocellulose-Alginate Hydrogels. , 2017, ACS applied materials & interfaces.

[30]  L. F. Arenas,et al.  3D-printed porous electrodes for advanced electrochemical flow reactors: A Ni/stainless steel electrode and its mass transport characteristics , 2017 .

[31]  Yaxiong Liu,et al.  The Emerging Frontiers and Applications of High-Resolution 3D Printing , 2017, Micromachines.

[32]  Jonghun Yoon,et al.  3D customized and flexible tactile sensor using a piezoelectric nanofiber mat and sandwich-molded elastomer sheets , 2017 .

[33]  Dana M Spence,et al.  Recent Advances in Analytical Chemistry by 3D Printing. , 2017, Analytical chemistry.

[34]  Petar Kocovic,et al.  3D Printing and Its Impact on the Production of Fully Functional Components: Emerging Research and Opportunities , 2017 .

[35]  Eujin Pei,et al.  A study of 3D printed active carbon electrode for the manufacture of electric double-layer capacitors , 2017 .

[36]  Joan M Cabot,et al.  Fibre-based electrofluidics on low cost versatile 3D printed platforms for solute delivery, separations and diagnostics; from small molecules to intact cells. , 2016, The Analyst.

[37]  D. Therriault,et al.  3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors. , 2016, Small.

[38]  Loïc J Blum,et al.  Adding Biomolecular Recognition Capability to 3D Printed Objects. , 2016, Analytical chemistry.

[39]  Jiankang He,et al.  Micro/nanoscale electrohydrodynamic printing: from 2D to 3D. , 2016, Nanoscale.

[40]  Kang Zhang,et al.  3D printing of functional biomaterials for tissue engineering. , 2016, Current opinion in biotechnology.

[41]  Jinbao Guo,et al.  Fabrication of highly conductive graphene flexible circuits by 3D printing , 2016 .

[42]  Alar Ainla,et al.  Integrating Electronics and Microfluidics on Paper , 2016, Advanced materials.

[43]  M. Layani,et al.  3D Printing of Shape Memory Polymers for Flexible Electronic Devices , 2016, Advanced materials.

[44]  Y. Rim,et al.  Recent Progress in Materials and Devices toward Printable and Flexible Sensors , 2016, Advanced materials.

[45]  Martin Pumera,et al.  3D-printing technologies for electrochemical applications. , 2016, Chemical Society reviews.

[46]  Seokheun Choi,et al.  A 3D paper-based enzymatic fuel cell for self-powered, low-cost glucose monitoring. , 2016, Biosensors & bioelectronics.

[47]  Albert Folch,et al.  The upcoming 3D-printing revolution in microfluidics. , 2016, Lab on a chip.

[48]  Thomas J. Hinton,et al.  3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding , 2016, ACS biomaterials science & engineering.

[49]  Elisa Michelini,et al.  Smartphone-interfaced 3D printed toxicity biosensor integrating bioluminescent “sentinel cells” , 2016 .

[50]  Hojin Ha,et al.  Three-Dimensional Printing: Basic Principles and Applications in Medicine and Radiology , 2016, Korean journal of radiology.

[51]  Wai Yee Yeong,et al.  Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: A review on processes, materials and designs , 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[52]  S. Vigneshvar,et al.  Recent Advances in Biosensor Technology for Potential Applications – An Overview , 2016, Front. Bioeng. Biotechnol..

[53]  D. Poulikakos,et al.  Electrohydrodynamic NanoDrip Printing of High Aspect Ratio Metal Grid Transparent Electrodes , 2016 .

[54]  Ibrahim T. Ozbolat,et al.  Current advances and future perspectives in extrusion-based bioprinting. , 2016, Biomaterials.

[55]  Alexandra Inberg,et al.  Processing Issues and the Characterization of Soft Electrochemical 3D Sensor , 2015 .

[56]  Ailiang Chen,et al.  Replacing antibodies with aptamers in lateral flow immunoassay. , 2015, Biosensors & bioelectronics.

[57]  Alexandra Inberg,et al.  Disposable electrochemical sensor prepared using 3D printing for cell and tissue diagnostics , 2015 .

[58]  Jun Yeob Song,et al.  High‐Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks , 2015, Advanced materials.

[59]  X. Duan,et al.  Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery. , 2015, Chemical Society reviews.

[60]  Guang-Zhong Yang,et al.  3D Printed Microfluidic Device with Integrated Biosensors for Online Analysis of Subcutaneous Human Microdialysate , 2015, Analytical chemistry.

[61]  V. Adam,et al.  3D‐printed biosensor with poly(dimethylsiloxane) reservoir for magnetic separation and quantum dots‐based immunolabeling of metallothionein , 2015, Electrophoresis.

[62]  James F Rusling,et al.  3D-Printed Fluidic Devices for Nanoparticle Preparation and Flow-Injection Amperometry Using Integrated Prussian Blue Nanoparticle-Modified Electrodes. , 2015, Analytical chemistry.

[63]  Joong Tark Han,et al.  3D Printing of Reduced Graphene Oxide Nanowires , 2015, Advanced materials.

[64]  George M Whitesides,et al.  Folding analytical devices for electrochemical ELISA in hydrophobic R(H) paper. , 2014, Analytical chemistry.

[65]  Elisa Michelini,et al.  A 3D-printed device for a smartphone-based chemiluminescence biosensor for lactate in oral fluid and sweat. , 2014, The Analyst.

[66]  X. Duan,et al.  A water soluble initiator prepared through host-guest chemical interaction for microfabrication of 3D hydrogels via two-photon polymerization. , 2014, Journal of materials chemistry. B.

[67]  Lukas Nejdl,et al.  3D printed chip for electrochemical detection of influenza virus labeled with CdS quantum dots. , 2014, Biosensors & bioelectronics.

[68]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[69]  P. Lisowski,et al.  Microfluidic Paper-Based Analytical Devices (μPADs) and Micro Total Analysis Systems (μTAS): Development, Applications and Future Trends , 2013, Chromatographia.

[70]  Shenguang Ge,et al.  Electrochemical DNA sensor based on three-dimensional folding paper device for specific and sensitive point-of-care testing , 2012 .

[71]  Chuck Hull,et al.  On Stereolithography , 2012 .

[72]  Waqar Ahmed,et al.  Emerging Nanotechnologies in Dentistry , 2012 .

[73]  Frederik L. Giesel,et al.  3D printing based on imaging data: review of medical applications , 2010, International Journal of Computer Assisted Radiology and Surgery.

[74]  John A Rogers,et al.  High-resolution electrohydrodynamic jet printing. , 2007, Nature materials.

[75]  Lisa Brannon-Peppas,et al.  Micro- and nanofabrication methods in nanotechnological medical and pharmaceutical devices , 2006, International journal of nanomedicine.

[76]  Shanhui Fan,et al.  Direct‐Write Assembly of Three‐Dimensional Photonic Crystals: Conversion of Polymer Scaffolds to Silicon Hollow‐Woodpile Structures , 2006 .

[77]  Seung-Cheol Chang,et al.  The biosensor based on the pyruvate oxidase modified conducting polymer for phosphate ions determinations. , 2006, Biosensors & bioelectronics.

[78]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[79]  Chee Kai Chua,et al.  A study of the state-of-the-art rapid prototyping technologies , 1998 .

[80]  Emanuel M. Sachs,et al.  Three-Dimensional Printing: The Physics and Implications of Additive Manufacturing , 1993 .

[81]  H. Kodama.  Automatic method for fabricating a three‐dimensional plastic model with photo‐hardening polymer , 1981 .