Rate-Boosting Using Strong Crosstalk in Next Generation Wireline Systems

Next-generation wireline systems may exploit fre- quencies up to several hundred MHz on short lines. Strong crosstalk coupling, comparable to the direct paths, is one of the main channel characteristics at high frequencies. Instead of fully cancelling all crosstalk, we utilize strong crosstalk paths to boost data-rate for active users. Two linear precoding schemes, based on maximum ratio-combining (MRC) and convex optimization, respectively, are proposed and applied to a common network topology. The precoding schemes exploit constructive crosstalk signals on unused lines or in unused parts of the spectrum on neighboring lines to boost data-rate while still complying with the regulated spectral power limits per line. More than 500 Mbps throughput gain per active user can be achieved compared to state-of-the-art linear precoding.

[1]  Carl J. Nuzman,et al.  G.fast: evolving the copper access network , 2013, IEEE Communications Magazine.

[2]  Marc Moonen,et al.  A Near-Optimal Linear Crosstalk Precoder for Downstream VDSL , 2007, IEEE Transactions on Communications.

[3]  John M. Cioffi,et al.  Vectored transmission for digital subscriber line systems , 2002, IEEE J. Sel. Areas Commun..

[4]  Per Ödling,et al.  The fourth generation broadband concept , 2009, IEEE Communications Magazine.

[5]  Dong Wei,et al.  G.fast for FTTdp: Enabling gigabit copper access , 2014, 2014 IEEE Globecom Workshops (GC Wkshps).

[6]  Marc Moonen,et al.  A Near-Optimal Linear Crosstalk Canceler for Upstream VDSL , 2006, IEEE Transactions on Signal Processing.

[7]  John M. Cioffi,et al.  Very-high-speed digital subscriber lines , 1999, IEEE Commun. Mag..

[8]  Stefan Höst,et al.  Optimizing power normalization for G.fast linear precoder by linear programming , 2014, 2014 IEEE International Conference on Communications (ICC).

[9]  Adriaan J. de Lind van Wijngaarden,et al.  XG-FAST: Towards 10 Gb/s copper access , 2014, 2014 IEEE Globecom Workshops (GC Wkshps).