Effect of rolling speed on microstructure and age-hardening behaviour of Al–Mg–Si alloy produced by twin roll casting process

[1]  C. Park,et al.  Effects of heat treatment on microstructure and mechanical properties of twin roll casted Al–5.5Mg–0.02Ti alloy , 2010 .

[2]  J. Seol,et al.  Effect of the rolling speed on microstructural and mechanical properties of aluminum―magnesium alloys prepared by twin roll casting , 2010 .

[3]  K. Mori,et al.  Improvement of product strength and formability in stamping of Al–Mg–Si alloy sheets having bake hardenability by resistance heat and artificial aging treatments , 2006 .

[4]  M. Karlík,et al.  The interaction of natural ageing with straining in a twin-roll cast AlMgSi automotive sheet , 2006 .

[5]  L. Hector,et al.  Molecular dynamics study of solute strengthening in Al/Mg alloys , 2006 .

[6]  Amauri Garcia,et al.  Effect of dendritic arm spacing on mechanical properties and corrosion resistance of Al 9 Wt Pct Si and Zn 27 Wt Pct Al alloys , 2006 .

[7]  L. Allard,et al.  Microstructural evolution in twin roll cast AA3105 during homogenization , 2006 .

[8]  Y. Birol.  Pre-straining to improve the bake hardening response of a twin-roll cast Al¿Mg¿Si alloy , 2005 .

[9]  Y. Birol.  Pre-aging to improve bake hardening in a twin-roll cast Al–Mg–Si alloy , 2005 .

[10]  Xiangdong Ding,et al.  Modeling the strengthening response to aging process of heat-treatable aluminum alloys containing plate/disc- or rod/needle-shaped precipitates , 2003 .

[11]  G. Gottstein,et al.  Triple junction drag and grain growth in 2D polycrystals , 2002 .

[12]  H. Abdullah,et al.  Influence of aging parameters on the mechanical properties of 6063 aluminium alloy , 2000 .

[13]  W. S. Miller,et al.  Recent development in aluminium alloys for the automotive industry , 2000 .

[14]  J. Hunt,et al.  Twin roll casting of aluminium alloys , 2000 .

[15]  P. Donelan.  Modelling microstructural and mechanical properties of ferritic ductile cast iron , 2000 .

[16]  D. Edmonds,et al.  Micro- and macrodefects in thin sheet twin-roll cast aluminum alloys , 1996 .

[17]  S. Zając,et al.  Microstructure control and extrudability of aluminium-Mg-Si alloys microalloyed with manganese , 1993 .

[18]  M. E. Kassner,et al.  Comments on, “Dynamic recrystalization during hot compression in Al-Mg alloy” , 1993 .

[19]  J. D. Hunt,et al.  An Experimental Investigation of the Effect of Strip Thickness, Metallostatic Head and Tip Setback on the Productivity of a Twin-roll Caster , 1991 .

[20]  O. E. Okorafor.  EFFECT OF HEAT TREATMENT ON THE CORROSION RESISTANCE OF 6063 ALUMINIUM ALLOY , 1991 .

[21]  D. Edmonds,et al.  An experimental study of twin-roll casting , 1991 .

[22]  G. Lorimer,et al.  Fatigue fracture behavior of an underaged Al-Mg-Si alloy , 1990 .

[23]  N. Petch,et al.  The Cleavage Strength of Polycrystals , 1953 .