A novel safety assurance method based on the compound equivalent modeling and iterate reduce particle‐adaptive Kalman filtering for the unmanned aerial vehicle lithium ion batteries

The safety assurance is very important for the unmanned aerial vehicle lithium ion batteries, in which the state of charge estimation is the basis of its energy management and safety protection. A new equivalent modeling method is proposed for the mathematical expression of different structural characteristics, and an improved reduce particle-adaptive Kalman filtering model is designed and built, in which the incorporate multiple featured information is absorbed to explore the optimal representation by abandoning the redundant and abnormal information. And then, the multiple parameter identification is investigated that has the ability of adapting the current varying conditions, according to which the hybrid pulse power characterization test is accommodated. As can be known from the experimental results, the polynomial fitting treatment is carried out by conducting the curve fitting treatment and the maximum estimation error of the closed-circuit-voltage is 0.48% and its state of charge estimation error is lower than 0.30% in the hybrid pulse power characterization test, which is also within 2.00% under complex current varying working conditions. The iterate calculation process is conducted for the unmanned aerial vehicle lithium ion batteries together with the compound equivalent modeling, realizing its adaptive power state estimation and safety protection effectively.

[1]  Alberto Berrueta,et al.  Combined dynamic programming and region-elimination technique algorithm for optimal sizing and management of lithium-ion batteries for photovoltaic plants , 2018, Applied Energy.

[2]  Ki Young Kim,et al.  Fast computational framework for optimal life management of lithium ion batteries , 2018 .

[3]  M. Ouyang,et al.  State-of-charge inconsistency estimation of lithium-ion battery pack using mean-difference model and extended Kalman filter , 2018 .

[4]  Chetan S. Kulkarni,et al.  Battery health management for small-size rotary-wing electric unmanned aerial vehicles: An efficient approach for constrained computing platforms , 2019, Reliab. Eng. Syst. Saf..

[5]  Leire Martín-Martín,et al.  Optimization of thermal management systems for vertical elevation applications powered by lithium-ion batteries , 2019, Applied Thermal Engineering.

[6]  L. Saw,et al.  Novel thermal management system using mist cooling for lithium-ion battery packs , 2018, Applied Energy.

[7]  Bing Ji,et al.  A Novel State-of-Charge Estimation Method of Lithium-Ion Batteries Combining the Grey Model and Genetic Algorithms , 2018, IEEE Transactions on Power Electronics.

[8]  Saeed Sepasi.  Adaptive state of charge estimation for battery packs , 2014 .

[9]  Bliss G. Carkhuff,et al.  Impedance-Based Battery Management System for Safety Monitoring of Lithium-Ion Batteries , 2018, IEEE Transactions on Industrial Electronics.

[10]  Jiye Zhang,et al.  Modeling and optimal energy management strategy for a catenary-battery-ultracapacitor based hybrid tramway , 2019, Energy.

[11]  Haifeng Dai,et al.  Estimation of state of health of lithium-ion batteries based on charge transfer resistance considering different temperature and state of charge , 2019, Journal of Energy Storage.

[12]  Guangzhao Luo,et al.  Lithium-ion battery state of health estimation with short-term current pulse test and support vector machine , 2018, Microelectron. Reliab..

[13]  Torsten Wik,et al.  Load-responsive model switching estimation for state of charge of lithium-ion batteries , 2019, Applied Energy.

[14]  Dylan Dah-Chuan Lu,et al.  Differential voltage analysis based state of charge estimation methods for lithium-ion batteries using extended Kalman filter and particle filter , 2018, Energy.

[15]  M. A. Hannan,et al.  A review of state of health and remaining useful life estimation methods for lithium-ion battery in electric vehicles: Challenges and recommendations , 2018, Journal of Cleaner Production.

[16]  Min Ye,et al.  A Novel Dynamic Performance Analysis and Evaluation Model of Series-Parallel Connected Battery Pack for Electric Vehicles , 2019, IEEE Access.

[17]  Piergiorgio Alotto,et al.  Standby thermal model of a vanadium redox flow battery stack with crossover and shunt-current effects , 2019, Applied Energy.

[18]  Mario Paolone,et al.  Enhanced Equivalent Electrical Circuit Model of Lithium-Based Batteries Accounting for Charge Redistribution, State-of-Health, and Temperature Effects , 2017, IEEE Transactions on Transportation Electrification.

[19]  Yujie Wang,et al.  Model based insulation fault diagnosis for lithium-ion battery pack in electric vehicles , 2019, Measurement.

[20]  Chuan-Yun Zou,et al.  An improved packing equivalent circuit modeling method with the cell‐to‐cell consistency state evaluation of the internal connected lithium‐ion batteries , 2019, Energy Science & Engineering.

[21]  Hongbin Ren,et al.  Design and implementation of a battery management system with active charge balance based on the SOC and SOH online estimation , 2019, Energy.

[22]  Evaluation of the Electrochemical Characterizations of Lithium-Ion Battery (LIB) Slurry with 10-Parameter Electrical Equivalent Circuit (EEC) , 2017 .

[23]  Hong-Hee Lee,et al.  Accurate Power Sharing With Balanced Battery State of Charge in Distributed DC Microgrid , 2019, IEEE Transactions on Industrial Electronics.

[24]  Simona Onori,et al.  An Interconnected Observer for Concurrent Estimation of Bulk and Surface Concentration in the Cathode and Anode of a Lithium-ion Battery , 2018, IEEE Transactions on Industrial Electronics.

[25]  Hao Yuan,et al.  Co-Estimation of State of Charge and State of Health for Lithium-Ion Batteries Based on Fractional-Order Calculus , 2018, IEEE Transactions on Vehicular Technology.

[26]  Guangzhong Dong,et al.  Particle filter-based state-of-charge estimation and remaining-dischargeable-time prediction method for lithium-ion batteries , 2019, Journal of Power Sources.

[27]  Dl Dmitry Danilov,et al.  Parameter estimation of an electrochemistry‐based lithium‐ion battery model using a two‐step procedure and a parameter sensitivity analysis , 2018 .

[28]  Yongliang Li,et al.  Investigation of thermal management for lithium-ion pouch battery module based on phase change slurry and mini channel cooling plate , 2019, Energy.

[29]  Furong Gao,et al.  A novel framework for Lithium-ion battery modeling considering uncertainties of temperature and aging , 2019, Energy Conversion and Management.

[30]  Guoqing Zhang,et al.  Experimental investigation of thermal management system for lithium ion batteries module with coupling effect by heat sheets and phase change materials , 2018 .

[31]  Chihao Lin,et al.  Cycle Life Prediction of Aged Lithium-Ion Batteries from the Fading Trajectory of a Four-Parameter Model , 2018 .

[32]  Xuan Zhou,et al.  A novel method for identification of lithium-ion battery equivalent circuit model parameters considering electrochemical properties , 2017 .

[33]  Jianqin Zhu,et al.  Performance analysis of a novel thermal management system with composite phase change material for a lithium-ion battery pack , 2018, Energy.

[34]  Amit Patra,et al.  State of Health Estimation of Lithium-Ion Batteries Using Capacity Fade and Internal Resistance Growth Models , 2018, IEEE Transactions on Transportation Electrification.

[35]  Haiping Ma,et al.  Multi-objective optimization of charging patterns for lithium-ion battery management , 2018 .

[36]  Jin-Ho Park,et al.  Battery State Estimation Algorithm for High-Capacity Lithium Secondary Battery for EVs Considering Temperature Change Characteristics , 2018 .

[37]  Michael Pecht,et al.  Accelerated degradation model for C-rate loading of lithium-ion batteries , 2019, International Journal of Electrical Power & Energy Systems.

[38]  Chung-Yuen Won,et al.  Lifetime management method of Lithium-ion battery for energy storage system , 2015, 2015 18th International Conference on Electrical Machines and Systems (ICEMS).

[39]  Limei Wang,et al.  State of charge estimation for LiFePO4 battery via dual extended kalman filter and charging voltage curve , 2019, Electrochimica Acta.

[40]  Zonghai Chen,et al.  Development of energy management system based on a rule-based power distribution strategy for hybrid power sources , 2019, Energy.

[41]  G. Lindbergh,et al.  Comparison of lumped diffusion models for voltage prediction of a lithium-ion battery cell during dynamic loads , 2018, Journal of Power Sources.

[42]  Ping Shen,et al.  The Co-estimation of State of Charge, State of Health, and State of Function for Lithium-Ion Batteries in Electric Vehicles , 2018, IEEE Transactions on Vehicular Technology.

[43]  Andreas Jossen,et al.  Modeling of lithium plating and lithium stripping in lithium-ion batteries , 2019, Journal of Power Sources.

[44]  Zhiyuan Liu,et al.  Lithium-ion battery state of charge estimation with model parameters adaptation using H∞ extended Kalman filter , 2018, Control Engineering Practice.

[45]  Fei Zhou,et al.  Thermal performance of cylindrical Lithium-ion battery thermal management system based on air distribution pipe , 2019, International Journal of Heat and Mass Transfer.

[46]  Xiangyong Liu,et al.  PNGV Equivalent Circuit Model and SOC Estimation Algorithm for Lithium Battery Pack Adopted in AGV Vehicle , 2018, IEEE Access.

[47]  Guangdi Hu,et al.  A parameter adaptive method with dead zone for state of charge and parameter estimation of lithium-ion batteries , 2018, Journal of Power Sources.

[48]  Cheng Chen,et al.  A Lithium-Ion Battery-in-the-Loop Approach to Test and Validate Multiscale Dual H Infinity Filters for State-of-Charge and Capacity Estimation , 2018, IEEE Transactions on Power Electronics.

[49]  Nicolas A. Wolff,et al.  Model Based Assessment of Performance of Lithium-Ion Batteries Using Single Ion Conducting Electrolytes , 2018, Electrochimica Acta.

[50]  Fan Xu,et al.  State-of-Charge Estimation of Lithium-Ion Batteries via Long Short-Term Memory Network , 2019, IEEE Access.

[51]  Rajeev Ahuja,et al.  Modelling high-performing batteries with Mxenes: The case of S-functionalized two-dimensional nitride Mxene electrode , 2019, Nano Energy.

[52]  Michel Kinnaert,et al.  State of health estimation for lithium ion batteries based on an equivalent-hydraulic model: An iron phosphate application , 2019, Journal of Energy Storage.