Elastic Averaging in Flexure Mechanisms: A Three-Beam Parallelogram Flexure Case Study

Over-constraint is an important concern in mechanism design because it can lead to a loss in desired mobility. In distributed-compliance flexure mechanisms, this problem is alleviated due to the phenomenon of elastic averaging, thus enabling performance-enhancing geometric arrangements that are otherwise unrealizable. The principle of elastic averaging is illustrated in this paper by means of a multi-beam parallelogram flexure mechanism. In a lumped-compliance configuration, this mechanism is prone to over-constraint in the presence of nominal manufacturing and assembly errors. However, with an increasing degree of distributed-compliance, the mechanism is shown to become more tolerant to such geometric imperfections. The nonlinear load-stiffening and elasto-kinematic effects in the constituent beams have an important role to play in the over-constraint and elastic averaging characteristics of this mechanism. Therefore, a parametric model that incorporates these nonlinearities is utilized in predicting the influence of a representative geometric imperfection on the primary motion stiffness of the mechanism. The proposed model utilizes a beam generalization so that varying degrees of distributed compliance are captured using a single geometric parameter.Copyright © 2006 by ASME

[1]  W. Moore,et al.  Foundations of mechanical accuracy , 1970 .

[2]  I. N. Moraes,et al.  Introduction to scientific research , 1966 .

[3]  Shorya Awtar,et al.  Characteristics of Beam-Based Flexure Modules , 2007 .

[4]  Patrick Willoughby,et al.  Elastically averaged precision alignment , 2005 .

[5]  L. Rubin,et al.  Instruments and Experiences: Papers on Measurement and Instrument Design , 1988 .

[6]  R V Jones,et al.  Some uses of elasticity in instrument design , 1962 .

[7]  Sridhar Kota,et al.  DESIGN OF LARGE-DISPLACEMENT COMPLIANT JOINTS , 2005 .

[8]  Shorya Awtar,et al.  Elastic Averaging in Flexure Mechanisms: A Muliti-Beam Parallelogram Flexure Case-Study , 2006 .

[9]  David J. Whitehouse,et al.  Handbook of Surface and Nanometrology , 2002 .

[10]  J E Furse.  Kinematic design of fine mechanisms in instruments , 1981 .

[11]  Youngseok Oh,et al.  Synthesis of Multistable Equilibrium Compliant Mechanisms. , 2008 .

[12]  Martin Grübler,et al.  Getriebelehre : Eine Theorie des Zwanglaufes und der ebenen Mechanismen , 1917 .

[13]  Arthur G. Erdman,et al.  Mechanism Design : Analysis and Synthesis , 1984 .

[14]  James G. Skakoon.  The elements of mechanical design , 2008 .

[15]  Shorya Awtar,et al.  Constraint-based design of parallel kinematic XY flexure mechanisms , 2007 .

[16]  W. PEDDIE,et al.  The Scientific Papers of James Clerk Maxwell , 1927, Nature.

[17]  Alexander H. Slocum,et al.  Precision passive mechanical alignment of wafers , 2003 .

[18]  Liudi Jiang,et al.  A novel method for nanoprecision alignment in wafer bonding applications , 2007 .

[19]  Marilyn E. Bruner,et al.  Structural mechanics of the solar-A Soft X-ray Telescope , 1992, Defense, Security, and Sensing.

[20]  Anastasios John Hart,et al.  Linear motion carriage with aerostatic bearings preloaded by inclined iron core linear electric motor , 2003 .

[21]  A. Slocum,et al.  Precision Machine Design , 1992 .