A crack tip tracking algorithm for cohesive interface element analysis of fatigue delamination propagation in composite materials

A novel approach is proposed for the use of cohesive elements in the analysis of delamination propagation in composite materials under high-cycle fatigue loading. The method is applicable to delamination propagation within the Paris-law regime and is suitable for the analysis of three-dimensional structures typical of aerospace applications. The major advantages of the proposed formulation are its complete independence of the cohesive zone length – which is a geometry-dependent parameter – and its relative insensitivity to mesh refinement. This is only possible via the introduction of three nonlocal algorithms, which provide (i) automated three-dimensional tracking of delamination fronts, (ii) an estimation of direction of crack propagation and (iii) accurate and mesh-insensitive integration of strain energy release rate. All calculations are updated at every increment of an explicit time-integration finite element solution, which models the envelopes of forces and displacements with an assumption of underlying constant cyclic loading. The method was implemented as a user-defined subroutine in the commercial finite element software LS-Dyna and supports the analysis of complex three-dimensional models. Results are presented for benchmark cases such as specimens with central cut plies and centrally-loaded circular plates. Accurate predictions of delamination growth rates are observed for different mesh topologies in agreement with the Paris-laws of the material.

[1]  Shankar Mall,et al.  A cohesive zone model for fatigue crack growth in quasibrittle materials , 2001 .

[2]  M. Crisfield,et al.  Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues , 2001 .

[3]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[4]  Pedro P. Camanho,et al.  Simulation of delamination in composites under high-cycle fatigue , 2007 .

[5]  Pedro P. Camanho,et al.  Mechanical Response of Composites , 2008 .

[6]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[7]  Stephen R Hallett,et al.  A fatigue degradation law for cohesive interface elements – Development and application to composite materials , 2010 .

[8]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .

[9]  Larsgunnar Nilsson,et al.  Simulating DCB, ENF and MMB experiments using shell elements and a cohesive zone model , 2004 .

[10]  Paul Robinson,et al.  Numerical simulation of fatigue‐driven delamination using interface elements , 2005 .

[11]  M. Wisnom,et al.  Predicting the effect of through-thickness compressive stress on delamination using interface elements , 2008 .

[12]  P. Camanho,et al.  Analytical and Numerical Investigation of the Length of the Cohesive Zone in Delaminated Composite Materials , 2008 .

[13]  M. Ortiz,et al.  FINITE-DEFORMATION IRREVERSIBLE COHESIVE ELEMENTS FOR THREE-DIMENSIONAL CRACK-PROPAGATION ANALYSIS , 1999 .

[14]  M. Wisnom,et al.  A new semi-empirical model for stress ratio effect on mode II fatigue delamination growth , 2011 .

[15]  M. Elices,et al.  Nonlinear fracture of cohesive materials , 1991, International Journal of Fracture.

[16]  Michael R Wisnom,et al.  PREDICTION OF DELAMINATION INITIATION AND GROWTH FROM DISCONTINUOUS PLIES USING INTERFACE ELEMENTS , 1998 .

[17]  Antonio Miravete,et al.  Application of the Finite-Element Method to Predict the Onset of Delamination Growth , 2004 .

[18]  Stephen R Hallett,et al.  Cohesive zone length in numerical simulations of composite delamination , 2008 .

[19]  F. L. Matthews,et al.  Predicting Progressive Delamination of Composite Material Specimens via Interface Elements , 1999 .

[20]  X. Zhang,et al.  IMPACT DAMAGE PREDICTION IN CARBON COMPOSITE STRUCTURES , 1995 .

[21]  Michael R Wisnom,et al.  A concise interface constitutive law for analysis of delamination and splitting in composite materials and its application to scaled notched tensile specimens , 2007 .

[22]  Michael Ortiz,et al.  A cohesive model of fatigue crack growth , 2001 .

[23]  M. Wisnom,et al.  An Experimental and Analytical Study of Delamination of Unidirectional Specimens with Cut Central Plies , 1994 .

[24]  P. Camanho,et al.  Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .

[25]  Leif Asp,et al.  Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loading , 2004 .