Improvement of impact properties of tungsten by potassium doping

[1]  M. Rieth,et al.  A review of impact properties of tungsten materials , 2018, Fusion Engineering and Design.

[2]  A. Hasegawa,et al.  Recrystallization behavior of hot-rolled pure tungsten and its alloy plates during high-temperature annealing , 2018 .

[3]  A. Hoffmann,et al.  The brittle-to-ductile transition in cold rolled tungsten: On the decrease of the brittle-to-ductile transition by 600 K to − 65 °C , 2018 .

[4]  Tobias Mrotzek,et al.  Ductilisation of tungsten (W): Tungsten laminated composites , 2017 .

[5]  S. Nogami,et al.  Improved structural strength and lifetime of monoblock divertor targets by using doped tungsten alloys under cyclic high heat flux loading , 2017 .

[6]  A. Hasegawa,et al.  Feasibility of Utilizing Tungsten Rod for Fusion Reactor Divertor , 2017 .

[7]  A. Hasegawa,et al.  Effect of microstructural anisotropy on the mechanical properties of K-doped tungsten rods for plasma facing components , 2016 .

[8]  A. Hasegawa,et al.  Tensile and fatigue properties of potassium doped and rhenium containing tungsten rods for fusion reactor applications , 2016 .

[9]  T. Muroga,et al.  Anisotropy in the Mechanical Properties of Potassium and Rhenium Doped Tungsten Alloy Plates for Fusion Reactor Applications , 2015 .

[10]  A. Hasegawa,et al.  Effects of temperature and strain rate on the tensile properties of potassium-doped tungsten , 2015 .

[11]  A. Hasegawa,et al.  Microstructure development of dispersion-strengthened tungsten due to neutron irradiation , 2014 .

[12]  D. Rupp,et al.  Fracture behaviour of polycrystalline tungsten , 2014 .

[13]  M. Rieth,et al.  Charpy impact properties of pure tungsten plate material in as-received and recrystallized condition (1 h at 2000 °C (2273 K)) , 2013 .

[14]  Reinhard Pippan,et al.  Recent progress in R&D on tungsten alloys for divertor structural and plasma facing materials , 2013 .

[15]  M. Rieth,et al.  The Impact of Refractory Material Properties on the Helium Cooled Divertor Design , 2012 .

[16]  D. Rupp,et al.  Loading rate dependence of the fracture toughness of polycrystalline tungsten , 2011 .

[17]  J. Vleugels,et al.  Mechanical properties and microstructural characterizations of potassium doped tungsten , 2012 .

[18]  G. Pintsuk,et al.  Thermo-mechanical and thermal shock characterization of potassium doped tungsten , 2010 .

[19]  P. Schade.  100 years of doped tungsten wire , 2010 .

[20]  Michael Rieth,et al.  Influence of microstructure and notch fabrication on impact bending properties of tungsten materials , 2010 .

[21]  D. Rupp,et al.  Fracture toughness and microstructural characterization of polycrystalline rolled tungsten , 2010 .

[22]  M. Rieth,et al.  Tungsten as a Structural Divertor Material , 2010 .

[23]  D. Rupp,et al.  Anisotropic fracture behaviour and brittle-to-ductile transition of polycrystalline tungsten , 2010 .

[24]  D. Rupp,et al.  Experimental investigation of the fracture toughness of polycrystalline tungsten in the brittle and semi-brittle regime , 2009 .

[25]  Q. Wei,et al.  Effect of low-temperature rolling on the tensile behavior of commercially pure tungsten , 2008 .

[26]  V. Buono,et al.  Pseudoelasticity of Cu-13.8Al-Ni Alloys Containing V and Nb , 2008 .

[27]  R. Pippan,et al.  Fracture toughness investigations of tungsten alloys and SPD tungsten alloys , 2007 .

[28]  A. Giannattasio,et al.  Strain-rate dependence of the brittle-to-ductile transition temperature in tungsten , 2007 .

[29]  Stephen Roberts,et al.  An empirical correlation between temperature and activation energy for brittle-to-ductile transitions in single-phase materials , 2007 .

[30]  T. Hanamura,et al.  Ductile-Brittle Transition Temperature of Ultrafine Ferrite/Cementite Microstructure in a Low Carbon Steel Controlled by Effective Grain Size , 2004 .

[31]  P. Gumbsch.  Brittle fracture and the brittle-to-ductile transition of tungsten , 2003 .

[32]  J. Roth,et al.  Plasma facing and high heat flux materials-needs for ITER and beyond , 2002 .

[33]  P. Makarov,et al.  Development of tungsten-based vacuum melted and powder structural alloys , 2002 .

[34]  I. Gorynin,et al.  Effects of neutron irradiation on properties of refractory metals , 1992 .

[35]  K. Shin,et al.  Ultrahigh temperature tensile properties of arc-melted tungsten and tungsten-iridium alloys , 1991 .

[36]  A. Babak.  Quantitative correlation between fracture toughness K1C and the short-term strength σb, σ0·2 of tungsten , 1983 .

[37]  E. I. Uskov,et al.  High-temperature embrittlement of tungsten , 1983 .

[38]  A. Babak.  Effect of recrystallization on the fracture toughness of tungsten , 1983 .

[39]  A. Babak.  Evaluating the crack resistance of tungsten at high temperatures , 1982 .

[40]  E. I. Uskov,et al.  Recrystallization and embrittlement of sintered tungsten , 1982 .

[41]  D. B. Snow.  The recrystallization of commercially pure and doped tungsten wire drawn to high strain , 1979 .

[42]  J. F. Knott,et al.  Effects of microstructure on cleavage fracture stress in steel , 1978 .

[43]  P. Wright.  The high temperature creep behavior of doped tungsten wire , 1978 .

[44]  J. Steichen.  Tensile properties of neutron irradiated TZM and tungsten , 1976 .

[45]  D. Lee,et al.  Fracture of drawn tungsten wires , 1975 .

[46]  J. Pugh.  On the short time creep rupture , 1973 .

[47]  J. Moteff,et al.  Comparison of microstructure with mechanical properties of irradiated tungsten , 1967 .

[48]  J. Stiegler,et al.  RECRYSTALLIZATION, GRAIN GROWTH, AND THE DUCTILE--BRITTLE TRANSITION IN TUNGSTEN SHEET. , 1967 .

[49]  N. Petch,et al.  The ductile-brittle transition in the fracture of α-iron: II , 1958 .

[50]  A. N. Stroh.  A theory of the fracture of metals , 1957 .

[51]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .