A lateral driver model for vehicle–driver closed-loop simulation at the limits of handling

This paper presents a lateral driver model for vehicle–driver closed-loop simulation at the limits of handling. An appropriate driver model can be used to evaluate the performance of vehicle chassis control systems via computer simulations before vehicle tests which incurs expenses especially at the limits of handling. The driver model consists of two parts. The first part is an upper-level controller employing force-based approach to reduce the number of unknown vehicle parameters. The feedforward part of the upper controller has been designed by using the centre of percussion. The feedback part aims to minimise ‘tangential error’, defined as the sum of body slip angle and yaw error, to match vehicle direction and road heading angle. The part is designed to regenerate an appropriate skid motion similar to that of a professional driver at the limits. The second part is a lower-level controller which converts the desired front lateral force to steering wheel angle. The lower-level controller also consists of feedforward and feedback parts. A two-degree-of-freedom bicycle model-based feedforward part provides nominal steering wheel angle, and the feedback part aims to eliminate unmodelled error. The performance of the lateral driver model has been investigated via computer simulations. It has been shown that the steering behaviours of the proposed driver model are quite close to those of a professional driver at the limits. Compared with the previously developed lateral driver models, the proposed lateral driver model shows good tracking performance at the limits of handling.

[1]  Wei-Bin Zhang,et al.  Demonstration of integrated longitudinal and lateral control for the operation of automated vehicles in platoons , 2000, IEEE Trans. Control. Syst. Technol..

[2]  Sanjiv Singh,et al.  Path Generation for Robot Vehicles Using Composite Clothoid Segments , 1990 .

[3]  Kirstin L. R. Talvala,et al.  Pushing the limits: From lanekeeping to autonomous racing , 2011, Annu. Rev. Control..

[4]  B. Anderson,et al.  Optimal control: linear quadratic methods , 1990 .

[5]  Kyongsu Yi,et al.  Design of a Model Reference Cruise Control Algorithm , 2012 .

[6]  Huei Peng,et al.  An adaptive lateral preview driver model , 2005 .

[7]  Efstathios Velenis,et al.  Optimality Properties and Driver Input Parameterization for Trail-braking Cornering , 2008, Eur. J. Control.

[8]  A. Kelly,et al.  TRAJECTORY GENERATION FOR CAR-LIKE ROBOTS USING CUBIC CURVATURE POLYNOMIALS , 2001 .

[9]  Rajesh Rajamani,et al.  Semi-autonomous adaptive cruise control systems , 2002, IEEE Trans. Veh. Technol..

[10]  Robin S. Sharp,et al.  OPTIMAL PREVIEW CAR STEERING CONTROL , 2001 .

[11]  H. -Z. Li,et al.  Comprehensive lateral driver model for critical maneuvering conditions , 2011 .

[12]  Sebastian Thrun,et al.  Stanley: The robot that won the DARPA Grand Challenge , 2006, J. Field Robotics.

[13]  Rami Yusef Hindiyeh,et al.  Dynamics and control of drifting in automobiles , 2013 .

[14]  J. Christian Gerdes,et al.  Using the centre of percussion to design a steering controller for an autonomous race car , 2012 .

[15]  J. Christian Gerdes,et al.  Autonomous Vehicle Control at the Limits of Handling , 2012 .

[16]  Yvonne Schuhmacher,et al.  Race Car Vehicle Dynamics , 2016 .

[17]  Robin S. Sharp.  Stability, Control and Steering Responses of Motorcycles , 2001 .

[18]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[19]  Joshua P. Switkes,et al.  EXPERIMENTAL VALIDATION OF THE POTENTIAL FIELD LANEKEEPING SYSTEM , 2004 .

[20]  Rajesh Rajamani,et al.  Vehicle dynamics and control , 2005 .

[21]  Kyongsu Yi,et al.  Design and Testing of a Controller for Autonomous Vehicle Path Tracking Using GPS/INS Sensors , 2008 .

[22]  Charles C. MacAdam,et al.  Understanding and Modeling the Human Driver , 2003 .

[23]  Kirstin L. R. Talvala,et al.  Lanekeeping at the Limits of Handling: Stability via Lyapunov Functions and a Comparison With Stability Control , 2008 .