Making real-time hardware-in-the-loop testing of automotive electronic control units wireless

Hardware-in-the-loop (HIL) simulation is an industry standard for testing automotive electronic control units (ECUs). In this paper, we present a concept that replaces the common wired cabling between a HIL test system and an automotive ECU and thus makes the real-time transmission of time-critical control, diagnostics, and calibration (CoDiCa) data wireless. This increases the flexibility of the HIL test setup and opens up new possibilities for testing automotive ECUs or autonomous driving systems. The proposed wireless communication gateway system adopts the robust physical layer IEEE 802.11p and is designed for operation in the 2.4 GHz industrial, scientific, and medical frequency (ISM) frequency band. To achieve compliance with the European regulations on spectrum access in this unlicensed band and to enable the bidirectional deterministic transfer of CoDiCa data, a new adaptive spectrum access procedure and time-slotted communication scheme is introduced. Based on extensive link-level simulations it is demonstrated that the introduced approach is able to meet the required real-time performance and hence is suitable to be applied for novel HIL test applications.

[1]  M.N.O. Sadiku,et al.  Software-defined radio: a brief overview , 2004, IEEE Potentials.

[2]  Robert Weigel,et al.  Signal detection and cooperative sensing with sensor nodes with limited dynamic , 2014, 2014 1st International Workshop on Cognitive Cellular Systems (CCS).

[3]  Yeqiong Song,et al.  Trends in Automotive Communication Systems , 2005, Proc. IEEE.

[4]  Lennart Karlsson,et al.  Improving Vehicle Diagnostics through Wireless Data Collection and Statistical Analysis , 2007, 2007 IEEE 66th Vehicular Technology Conference.

[5]  Hüseyin Arslan,et al.  A survey of spectrum sensing algorithms for cognitive radio applications , 2009, IEEE Communications Surveys & Tutorials.

[6]  Robert Weigel,et al.  Radio hardware in-the-loop emulation for testing vehicular communication systems , 2013, 2013 IEEE 5th International Symposium on Wireless Vehicular Communications (WiVeC).

[7]  Jhing-Fa Wang,et al.  The Implementation of Real-Time On-line Vehicle Diagnostics and Early Fault Estimation System , 2011, 2011 Fifth International Conference on Genetic and Evolutionary Computing.

[8]  Dacfey Dzung,et al.  Unplugged but connected [Design and implementation of a truly wireless real-time sensor/actuator interface] , 2007, IEEE Industrial Electronics Magazine.

[9]  Jace L. Allen.  Implementation of HIL testing systems for aerospace ECUs , 2005 .

[10]  Juan-Carlos Cano,et al.  Validation of a vehicle emulation platform supporting OBD-II communications , 2015, 2015 12th Annual IEEE Consumer Communications and Networking Conference (CCNC).

[11]  Franchi Norman,et al.  Low latency evaluation of an adaptive industrial wireless communications system for ISM bands , 2016 .

[12]  Tore Risch,et al.  Relaying Controller Area Network Frames over Wireless Internetworks for Automotive Testing Applications , 2009, 2009 Fourth International Conference on Systems and Networks Communications.

[13]  Juan-Carlos Cano,et al.  Providing accident detection in vehicular networks through OBD-II devices and Android-based smartphones , 2011, 2011 IEEE 36th Conference on Local Computer Networks.

[14]  Mary Ann Ingram,et al.  Model development for the wideband expressway vehicle-to-vehicle 2.4 GHz channel , 2006, IEEE Wireless Communications and Networking Conference, 2006. WCNC 2006..