Forced vibration analysis of rotors with an open edge crack based on a continuous vibration theory

In this paper, the forced vibration of a cracked rotor with an open edge crack has been studied by a new continuous model for flexural vibration of cracked rotors proposed in Ebrahimi et al. (J Sound Vib 333:3522–3535, 2014). The cracked rotor behavior under the external excitation of gravity and unbalance forces is presented. Since the governing equation is linear, using the superposition principle the responses of the cracked rotor to the gravity and unbalance forces are calculated separately. Then, the total response is calculated by summing these two responses. Each of these two responses is found by using a modified Galerkin method. The effect of the crack in the presence of the gravity and unbalance forces on the time response, frequency spectrum, frequency response curve and orbit diagram of the rotor is analyzed. Results can be used for the crack identification of rotors.

[1]  Alireza Ebrahimi,et al.  A continuous vibration theory for rotors with an open edge crack , 2014 .

[2]  A. Meghdari,et al.  A linear theory for bending stress-strain analysis of a beam with an edge crack , 2008 .

[3]  Andrew D. Dimarogonas,et al.  Vibration of cracked structures: A state of the art review , 1996 .

[4]  R. Gordon Kirk,et al.  Cracked shaft detection and diagnostics: A literature review , 2004 .

[5]  Eric A. Butcher,et al.  New breathing functions for the transverse breathing crack of the cracked rotor system: Approach for critical and subcritical harmonic analysis , 2011 .

[6]  Paolo Pennacchi,et al.  A model based identification method of transverse cracks in rotating shafts suitable for industrial machines , 2006 .

[7]  H. D. Nelson,et al.  The Dynamics of a Rotor System with a Cracked Shaft , 1986 .

[8]  C. A. Papadopoulos,et al.  The strain energy release approach for modeling cracks in rotors: A state of the art review , 2008 .

[9]  Tejas H. Patel,et al.  Influence of crack breathing model on nonlinear dynamics of a cracked rotor , 2008 .

[10]  T. Chondros,et al.  Analytical Methods in Rotor Dynamics , 1983 .

[11]  YuShu Chen,et al.  Super-harmonic responses analysis for a cracked rotor system considering inertial excitation , 2015 .

[12]  Athanasios Chasalevris,et al.  A continuous model approach for cross-coupled bending vibrations of a rotor-bearing system with a transverse breathing crack , 2009 .

[13]  Mehdi Behzad,et al.  A new continuous model for flexural vibration analysis of a cracked beam , 2008 .

[14]  J. L. Zapico-Valle,et al.  Rotor crack identification based on neural networks and modal data , 2014 .

[15]  Zhengjia He,et al.  Identification of crack in a rotor system based on wavelet finite element method , 2007 .

[16]  Yongyong He,et al.  STUDY ON GENETIC ALGORITHMS BASED ROTOR CRACK DETECTION FOR ROTATING MACHINE , 2001 .

[17]  C. A. Papadopoulos,et al.  Crack identification in rotating shafts by coupled response measurements , 2002 .

[18]  A. K. Darpe,et al.  Coupled vibrations of a rotor with slant crack , 2007 .

[19]  Omid Omidi,et al.  NUMERICAL ANALYSIS OF CYCLICALLY LOADED CONCRETE UNDER LARGE TENSILE STRAINS BY THE PLASTIC-DAMAGE MODEL , 2010 .

[20]  Hu Chen,et al.  Nonlinear response prediction of cracked rotor based on EMD , 2013, J. Frankl. Inst..

[21]  Fulei Chu,et al.  The dynamic behavior of a rotor system with a slant crack on the shaft , 2010 .

[22]  A. Bouboulas,et al.  Three-dimensional finite element modeling of a vibrating beam with a breathing crack , 2013 .

[23]  Jerzy T. Sawicki,et al.  Rigid Finite Element Model of a Cracked Rotor , 2012 .

[24]  Chunlin Zhang,et al.  Crack location identification of rotating rotor systems using operating deflection shape data , 2013 .

[25]  Paolo Pennacchi,et al.  Cracked Rotors: A Survey on Static and Dynamic Behaviour Including Modelling and Diagnosis , 2010 .

[26]  Alireza Ebrahimi,et al.  Optimal vibration control of rotors with an open edge crack using an electromagnetic actuator , 2018 .

[27]  Mohammad A. AL-Shudeifat,et al.  On the finite element modeling of the asymmetric cracked rotor , 2013 .

[28]  Oh Sung Jun,et al.  Influence coefficients on rotor having thick shaft elements and resilient bearings , 2004 .

[29]  A. S. J. Swamidas,et al.  Crack Detection in Shaft Using Lateral and Torsional Vibration Measurements and Analyses , 2012 .

[30]  A. S. Sekhar,et al.  Hilbert–Huang transform for detection and monitoring of crack in a transient rotor , 2008 .

[31]  A. S. Sekhar,et al.  VIBRATION CHARACTERISTICS OF A CRACKED ROTOR WITH TWO OPEN CRACKS , 1999 .

[32]  Lei Hou,et al.  Nonlinear response analysis for a dual-rotor system with a breathing transverse crack in the hollow shaft , 2016 .

[33]  A. S. Sekhar,et al.  Some Recent Studies on Cracked Rotors , 2011 .

[34]  Marek Krawczuk,et al.  Coupled torsional and bending vibrations of a rotor with an open crack , 1992, Archive of Applied Mechanics.

[35]  A. S. Sekhar,et al.  Crack detection in a rotor by operational deflection shape and kurtosis using laser vibrometer measurements , 2013 .

[36]  Ali Meghdari,et al.  A bending theory for beams with vertical edge crack , 2010 .

[37]  Jörg Wauer,et al.  On the Dynamics of Cracked Rotors: A Literature Survey , 1990 .

[38]  R. Gasch,et al.  A Survey Of The Dynamic Behaviour Of A Simple Rotating Shaft With A Transverse Crack , 1993 .

[39]  Zhengjia He,et al.  Rotor crack detection based on high-precision modal parameter identification method and wavelet finite element model , 2009 .

[40]  A. S. Sekhar,et al.  Detection of two cracks in a rotor-bearing system using amplitude deviation curve , 2008 .

[41]  T. C. Tsai,et al.  The vibration of a multi-crack rotor , 1997 .