Review of Rapid OKP Product Development

This chapter provides a comprehensive review of the historical background of product design and manufacturing systems for the rapid development of OKP products. Through the overview of existing OKP systems and recent approaches to product design and manufacturing systems, the author will discuss current techniques that can be used to implement product design and manufacturing systems for producing OKP products. The problems that have emerged from recent developments are reviewed and sorted in this chapter. The future trends of collaborative design, decision support, manufacturing support, supply chain management, workflow management, Internet techniques for product design and manufacturing, productmodelling, STEP-based data environment, concurrent engineering, etc., will also be discussed in this chapter. The reviewed state-of-the-artworks have been used directly or indirectly as references for this book. At the end of the chapter, a reference system structure for building an Internet-based integrated product development (PD) system is proposed for the rapid development of OKP products.

[1]  Carmen M. Pancerella,et al.  A CORBA-based manufacturing environment , 1996, Proceedings of the Thirtieth Hawaii International Conference on System Sciences.

[2]  H. V. Parunak.  Chapter 10 – Manufacturing Experience with the Contract Net , 1987 .

[3]  Jay M. Tenenbaum,et al.  An intelligent agent framework for enterprise integration , 1991, IEEE Trans. Syst. Man Cybern..

[4]  Wang Fan.  A Java-EE based Product Design Management System , 2010, 2010 International Conference on Intelligent Computing and Cognitive Informatics.

[5]  Yeongho Kim,et al.  Brokering and 3D collaborative viewing of mechanical part models on the Web , 2001, Int. J. Comput. Integr. Manuf..

[6]  Ling Tian,et al.  A systematic approach for 3D VRML model-based assembly in Web-based product design , 2007 .

[7]  Bernie Roehl,et al.  Virtual reality creations: explore, manipulate, and create virtual worlds on your PC , 1993 .

[8]  Kimberley Ellis,et al.  Requirements Analysis: Process Plan Specification - Workstation Level , 1998 .

[9]  Timothy L. Smunt,et al.  Log-linear and non-log-linear learning curve models for production research and cost estimation , 1999 .

[10]  Taha Khedro,et al.  A distributed problem-solving approach to collaborative facility engineering , 1996 .

[11]  Linard Karklin,et al.  Cost-performance tradeoff between design and manufacturing: DfM or MfD? , 2007, SPIE Advanced Lithography.

[12]  Mark R. Cutkosky,et al.  Madefast: collaborative engineering over the Internet , 1996, CACM.

[13]  Robert D. Braun,et al.  Collaborative optimization: an architecture for large-scale distributed design , 1996 .

[14]  Paul G. Maropoulos.  Review of research in tooling technology, process modelling and process planning part II: Process planning , 1995 .

[15]  Soo-Hong Lee,et al.  A distributed, open, intelligent product data management system , 2001, Int. J. Comput. Integr. Manuf..

[16]  A. G. Mamalis,et al.  On-line integration of a process planning module with production scheduling , 1996 .

[17]  Arthur W. Toga,et al.  Image Analysis of Brain Physiology , 1985, IEEE Computer Graphics and Applications.

[18]  Xuehong Du,et al.  Design by Customers for Mass Customization Products , 1998 .

[19]  Robert J. Wood,et al.  Towards a 3g crawling robot through the integration of microrobot technologies , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[20]  Tamás Koltai,et al.  A flexible costing system for flexible manufacturing systems using activity based costing , 2000 .

[21]  Andrew C. Boynton,et al.  Achieving Dynamic Stability through Information Technology , 1993 .

[22]  Carla Simone,et al.  A notation for malleable and interoperable coordination mechanisms for CSCW systems , 1995, COCS '95.

[23]  John K. L. Ho,et al.  A multimedia communication framework for the selection of collaborative partners in global manufacturing , 2000, Int. J. Comput. Integr. Manuf..

[24]  Kosuke Ishii,et al.  Design for product retirement and material life-cycle , 1994 .

[25]  R. Ramesh,et al.  COMPUTER-INTEGRATED PROCESS PLANNING AND SCHEDULING (CIPPS) : INTELLIGENT SUPPORT FOR PRODUCT DESIGN, PROCESS PLANNING AND CONTROL , 1999 .

[26]  George Q. Huang,et al.  Issues in the development and implementation of web applications for product design and manufacture , 2001, Int. J. Comput. Integr. Manuf..

[27]  Duane K. Boman,et al.  International Survey: Virtual-Environment Research , 1995, Computer.

[28]  William H. Chui.  A WWW computer integrated manufacturing environment for rapid prototyping and education , 1999, Int. J. Comput. Integr. Manuf..

[29]  Paul T. Kidd,et al.  Agile Manufacturing: Forging New Frontiers , 1994 .

[30]  Yoav Shoham.  Agent-Oriented Programming , 1993, Artif. Intell..

[31]  N. A. Duffie.  Heterarchical control of highly distributed manufacturing systems , 1996 .

[32]  Alison McKay,et al.  Relating product definition and product variety , 1996 .

[33]  Robert D. Logcher,et al.  Computer-Aided Cooperative Product Development , 1989, Lecture Notes in Computer Science.

[34]  Huaglory Tianfield,et al.  Advanced life-cycle model for complex product development via stage-aligned information-substitutive concurrency and detour , 2001, Int. J. Comput. Integr. Manuf..

[35]  John A. Reed,et al.  Developing interactive educational engineering software for the world wide web with Java , 1998, Comput. Educ..

[36]  Jouni Similä,et al.  Industrial Management & Data Systems Managerial view on design for manufacturing , 2017 .

[37]  Daizhong Su,et al.  A CGI-based approach for remotely executing a large program for integration of design and manufacture over the Internet , 2001, Int. J. Comput. Integr. Manuf..

[38]  Kevin Crowston,et al.  Intelligent software agents , 1988 .

[39]  Shane Xie,et al.  An Integrated CAD/CAPP/CAM System for Compound Sheet Metal Cutting and Punching , 2000 .

[40]  Xi Li-feng,et al.  DCOM and MMS–based control software architecture for automated manufacturing system , 2006 .

[41]  Kenneth Y. Goldberg,et al.  FixtureNet: interactive computer-aided design via the World Wide Web , 1997, Int. J. Hum. Comput. Stud..

[42]  David A. Bourne,et al.  Using features and their constraints to aid process planning of sheet metal parts , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[43]  David L. Spooner,et al.  Sharing manufacturing information in virtual enterprises , 1996, CACM.

[44]  D. Morgan,et al.  ISDN as an enabler for enterprise integration , 1990, IEEE Communications Magazine.

[45]  Gerald T. Mackulak,et al.  Methodology for simulation application to virtual manufacturing environments , 1995, WSC '95.

[46]  Bing Jiang,et al.  A generic integrated system from CAD to CAPP: a neutral file-cum-GT approach , 1998 .

[47]  Frederick M. Proctor,et al.  JAVA-Based Tools for Development and Diagnosis of Real-Time Control Systems , 1998 .

[48]  T. Menzel,et al.  Hybrid simulation objects using fuzzy set theory for simulation of innovative process chains , 1999, Proceedings of the Second International Conference on Intelligent Processing and Manufacturing of Materials. IPMM'99 (Cat. No.99EX296).

[49]  G. Boothroyd.  Design for excellence , 1996 .

[50]  Michael J. Shaw,et al.  Dynamic scheduling in cellular manufacturing systems: A framework for networked decision making , 1988 .

[51]  Yan Jin,et al.  Modeling and Simulation in Enterprise Integration—A Framework and an Application in the Offshore Oil Industry , 1996 .

[52]  James J. Solberg,et al.  INTEGRATED SHOP FLOOR CONTROL USING AUTONOMOUS AGENTS , 1992 .

[53]  Rakesh Nagi,et al.  Migrating from IGES to STEP: one to one translation of IGES drawing to STEP drafting data , 2000 .

[54]  Jae Yeol Lee,et al.  Generating Alternative Interpretations of Machining Features , 1999 .

[55]  Pär Klingstam,et al.  Overview of simulation tools for computer-aided production engineering , 1999 .

[56]  Michael Clarke,et al.  A distributed object platform infrastructure for multimedia applications , 1998, Comput. Commun..

[57]  Monica S. Lam,et al.  Jade: a high-level, machine-independent language for parallel programming , 1993, Computer.

[58]  K Shea,et al.  An approach to multi-objective optimization for parametric synthesis , 2001 .

[59]  J. E. Fowler.  Variant design for mechanical artifacts: A state-of-the-art survey , 2005, Engineering with Computers.

[60]  Chun Zhang,et al.  An Internet based STEP data exchange framework for virtual enterprises , 2000 .

[61]  A. Tharumarajah,et al.  A behavior-based approach to scheduling in distributed manufacturing systems , 1997 .

[62]  Luc Bongaerts,et al.  Planning systems in the next century ( II ) , 1996 .

[63]  Annie I. Antón,et al.  A Web-based requirements analysis tool , 1996, Proceedings of WET ICE '96. IEEE 5th Workshop on Enabling Technologies; Infrastucture for Collaborative Enterprises.

[64]  Li Lin,et al.  An integrated graphical user interface (GUI) for concurrent engineering design of mechanical parts , 1998 .

[65]  Russell Marshall,et al.  A systems engineering approach to product modularity , 1999 .

[66]  Jami J. Shah,et al.  Integrated product data environment: data sharing across diverse engineering applications , 1999, Int. J. Comput. Integr. Manuf..

[67]  Douglas H. Norrie,et al.  Agent-Based Systems for Intelligent Manufacturing: A State-of-the-Art Survey , 1999, Knowledge and Information Systems.

[68]  Matthew B. Parkinson,et al.  MULTICRITERIA OPTIMIZATION IN PRODUCT PLATFORM DESIGN , 1999, DAC 1999.

[69]  C. Saygin,et al.  Integrating Flexible Process Plans with Scheduling in Flexible Manufacturing Systems , 1999 .

[70]  Q. Zhou.  Information management in production planning for a virtual enterprise , 1999 .

[71]  R. Booth,et al.  Agile manufacturing [management] , 1996 .

[72]  Ali K. Kamrani,et al.  Product design for modularity , 2000 .

[73]  George Q. Huang,et al.  The DFX shell: A generic framework for developing design for X tools , 1997 .

[74]  Richard J. Mayer,et al.  Situations and Processes , 1996 .

[75]  Christiaan J. J. Paredis,et al.  Intelligent Assembly Modeling and Simulation , 2001 .

[76]  Jianxin Jiao,et al.  An Information Modeling Framework for Product Families to Support Mass Customization Manufacturing , 1999 .

[77]  Rui-Rong Wu,et al.  A CAPP framework and its methodology , 1998 .

[78]  Robert E. Young,et al.  An artificial intelligence-based constraint network system for concurrent engineering , 1992 .

[79]  Xiaofeng Song,et al.  Research on Module-Based Variant Design for Mass Customization , 2006, PROLAMAT.

[80]  C. Ou-Yang,et al.  Developing a STEP-Based Integration Environment to Evaluate the Impact of an Engineering Change on MRP , 1999 .

[81]  Riyaz Sikora,et al.  Coordination mechanisms for multi-agent manufacturing systems: applications to integrated manufacturing scheduling , 1997 .

[82]  Michael J. Shaw,et al.  A multi-agent framework for the coordination and integration of information systems , 1998 .

[83]  Hyunbo Cho,et al.  CORBA-based integration framework for distributed shop floor control⋆ , 2003, Comput. Ind. Eng..

[84]  Peter O'Grady,et al.  Distributed Concurrent Engineering: Internet-Based Interactive 3-D Dynamic Browsing and Markup of STEP Data , 1998 .

[85]  Ilan Kroo,et al.  Use of the Collaborative Optimization Architecture for Launch Vehicle Design , 1996 .

[86]  Li-Chih Wang,et al.  A multi-agent based agile manufacturing planning and control system , 2009, Comput. Ind. Eng..

[87]  Ram D. Sriram,et al.  Design Repositories: Next-Generation Engineering Design Databases , 2000 .

[88]  Mark R. Cutkosky,et al.  PACT: an experiment in integrating concurrent engineering systems , 1993, Computer.

[89]  K. L. Edwards,et al.  Towards more strategic product design for manufacture and assembly: priorities for concurrent engineering , 2002 .

[90]  Alice M. Agogino,et al.  Managing design information in enterprise-wide CAD using 'smart drawings' , 1998, Comput. Aided Des..

[91]  Gq Huang,et al.  Web-based design for assembly , 1998 .

[92]  D. K. Harrison,et al.  Web-based design and manufacturing support systems: Implementation perspectives , 2001, Int. J. Comput. Integr. Manuf..

[93]  Ray Eberts,et al.  Distributed planning of collaborative production , 1993 .

[94]  A de Pennington,et al.  A role interaction approach to support manufacturing enterprise integration , 1998 .

[95]  Deyi Xue,et al.  Modeling of Evolutionary Design Database , 2006, J. Comput. Inf. Sci. Eng..

[96]  N. D. Burns,et al.  Rapid prototyping cellular systems for virtual global enterprises , 1997 .

[97]  Rakesh Nagi,et al.  STEP-based feature extraction from STEP geometry for Agile manufacturing , 2000 .

[98]  Hong Li,et al.  Some extensions to the Purdue Enterprise Reference Architecture (PERA): I. Explaining the Purdue architecture and the Purdue methodology using the axioms of engineering design , 1997 .

[99]  P. C. Muller,et al.  Using the Internet as a communication infrastructure for lead user involvement in the new product development process , 1996, Proceedings of WET ICE '96. IEEE 5th Workshop on Enabling Technologies; Infrastucture for Collaborative Enterprises.

[100]  Norbert A. Streitz,et al.  Developing CSCW tools for idea finding -: empirical results and implications for design , 2002, CSCW '02.

[101]  K. L. Mak,et al.  Web-integrated manufacturing , 2001, Int. J. Comput. Integr. Manuf..

[102]  Peter Bernus,et al.  Architectures for Enterprise Integration , 1996, IFIP Advances in Information and Communication Technology.

[103]  Yiliu Tu,et al.  Production planning and control in a virtual one-of-a-kind production company , 1997 .

[104]  K. Feldmann,et al.  Multimedia System for Remote Diagnosis of Complex Placement Machines , 1999 .

[105]  Fariborz Tayyari,et al.  A Totally Integrated Manufacturing Cost Estimating System (TIMCES) , 1992 .

[106]  Dana S. Nau,et al.  Automated manufacturability analysis: A survey , 1995 .

[107]  Amy Knutilla,et al.  Collaboration Technologies for Global Manufacturing , 1999 .

[108]  Guy Doumeingts,et al.  Methodologies for designing CIM systems: a survey , 1995 .

[109]  Douglas H. Norrie,et al.  Distributed decision-making using the contract net within a mediator architecture , 1997, Decis. Support Syst..

[110]  Jan Holmström,et al.  Design for speed: a supply chain perspective on design for manufacturability , 1995 .

[111]  Mitchell M. Tseng,et al.  Design an intelligent machine center—strategy and practice , 1998 .

[112]  Ashjørn Rolstadås.  ESPRIT Basic Research Action No. 3143—FOF production theory , 1991 .

[113]  Kai Cheng,et al.  Implementation of agile manufacturing — an AI and Internet based approach , 1998 .

[114]  Y. T. Lee,et al.  Data Sharing Implementation Based on the Information Model for Apparel Pattern Making | NIST , 1997 .

[115]  Andrew Y. C. Nee,et al.  Collaborative Design and Planning for Digital Manufacturing , 2009 .

[116]  Antonio Puliafito,et al.  Mobile Agents and Legacy Systems: How to Integrate Alternative Communication Paradigms , 2001, MATA.

[117]  Stephen T. Newman,et al.  An information systems architecture for small metal-working companies , 1998 .

[118]  Hannes P. Lubich.  Towards a CSCW Framework for Scientific Cooperation in Europe , 1995, Lecture Notes in Computer Science.

[119]  Shane Xie,et al.  A WWW-based integrated product development information management system , 2000 .

[120]  M.S.J. Hashmi,et al.  Virtual reality applications in manufacturing process simulation , 2004 .

[121]  Dan Harkey,et al.  Client/server survival guide (3rd ed.) , 1999 .

[122]  Shane Xie,et al.  An Information Modelling Framework to Support Intelligent Concurrent Design and Manufacturing of Sheet Metal Parts , 2001 .

[123]  S.-Y. Lin,et al.  Extraction of manufacturing features from a feature-based design model , 1997 .

[124]  Hsin Hsin Chang.  The implementation and integration of information systems for production management in manufacturing: An empirical study , 2000, Int. J. Comput. Integr. Manuf..

[125]  Kang G. Shin,et al.  Distributed tool sharing in flexible manufacturing systems , 1998, IEEE Trans. Robotics Autom..

[126]  J. Hartley..  Concurrent Engineering: Shortening Lead Times, Raising Quality, and Lowering Costs , 1998 .

[127]  Yiliu Tu,et al.  Integrated and concurrent approach for compound sheet metal cutting and punching , 2001 .

[128]  Hans Wortmann,et al.  Planning systems in the next century ( I ) , 1997 .

[129]  Reijo Sulonen,et al.  Modelling generic product structures in STEP , 1998, Comput. Aided Des..

[130]  Keith A. Seffen,et al.  A SIMULATED ANNEALING ALGORITHM FOR MULTIOBJECTIVE OPTIMIZATION , 2000 .

[131]  Lawrence J. Najjar,et al.  An interactive environment for virtual manufacturing: the virtual work bench , 1999 .

[132]  Xun Xu,et al.  STEP-compliant process planning system for compound sheet metal machining , 2008 .

[133]  Tianbiao Yu,et al.  Product Quality Design Based on CSCW under Networked Manufacturing , 2008, 2008 4th International Conference on Wireless Communications, Networking and Mobile Computing.

[134]  J. K. Liu,et al.  OWL/SWRL representation methodology for EXPRESS-driven product information model: Part I. Implementation methodology , 2008, Comput. Ind..

[135]  Jürgen Bode,et al.  Neural networks for cost estimation: Simulations and pilot application , 2000 .

[136]  Hyeongseok Ko,et al.  Insertion of an articulated human into a networked virtual environment , 1994, Fifth Annual Conference on AI, and Planning in High Autonomy Systems.

[137]  Steve Vinoski,et al.  CORBA: integrating diverse applications within distributed heterogeneous environments , 1997, IEEE Commun. Mag..

[138]  Charles R. McLean,et al.  The Automated Manufacturing Research Facility of the National Bureau of Standards | NIST , 1983 .

[139]  Michael J. Bailey,et al.  Tele-Manufacturing: rapid prototyping on the Internet , 1995, IEEE Computer Graphics and Applications.

[140]  Hong-Chao Zhang,et al.  Computer Aided Process Planning: the state-of-the-art survey , 1989 .

[141]  Kai Cheng,et al.  The Internet as a tool with application to agile manufacturing: A web-based engineering approach and its implementation issues , 2000 .