Design and performance of capping layers for EUV multilayer mirrors

The reflectance stability of multilayer coatings for extreme ultraviolet lithography (EUVL) in a commercial tool environment is of utmost importance to ensure continuous exposures with minimum maintenance cost. We have made substantial progress in designing the protective capping layer coatings, understanding their performance and estimating their lifetimes based on accelerated electron beam and EUV exposure studies. Our current capping layer coatings have about 40 times longer lifetimes than Si-capped multilayer optics. Nevertheless, the lifetime of current Ru-capped multilayers is too short to satisfy commercial tool requirements and further improvements are essential.

[1]  K Nguyen,et al.  Tarnishing of Mo/Si multilayer x-ray mirrors. , 1993, Applied optics.

[2]  W. Miles Clift,et al.  Environmental data from the engineering test stand , 2002, SPIE Advanced Lithography.

[3]  S. Braun,et al.  Mo/Si-multilayers for EUV applications prepared by Pulsed Laser Deposition (PLD) , 2001 .

[4]  E. Gullikson,et al.  High-resolution, high-flux, user friendly VLS beamline at the ALS for the 50–1300 eV energy region , 1998 .

[5]  Frank Scholze,et al.  Multilayer reflectance during exposure to EUV radiation , 2000, SPIE Optics + Photonics.

[6]  Eric M. Gullikson,et al.  Lifetime studies of Mo/Si and Mo/Be multilayer coatings for extreme ultraviolet lithography , 1999, Optics & Photonics.

[7]  R. Scholz,et al.  Mo/Si Multilayers with Different Barrier Layers for Applications as Extreme Ultraviolet Mirrors , 2002 .

[8]  W. M. Clift,et al.  Radiation-induced protective carbon coating for extreme ultraviolet optics , 2002 .

[9]  M. Clift,et al.  Radio-frequency discharge cleaning of silicon-capped Mo/Si multilayer extreme ultraviolet optics , 2002 .

[10]  Hans Meiling,et al.  Molecular contamination mitigation in EUVL by environmental control , 2002 .

[11]  Michael E. Malinowski,et al.  First environmental data from the EUV engineering test stand , 2001, SPIE Advanced Lithography.

[12]  Russell M. Hudyma.  An overview of optical systems for 30 nm resolution lithography at EUV wavelengths , 2002, International Optical Design Conference.

[13]  Troy W. Barbee,et al.  Advances in multilayer reflective coatings for extreme ultraviolet lithography , 1999, Advanced Lithography.

[14]  B. Vidal,et al.  Extreme-ultraviolet multilayer mirrors deposited using radio-frequency-magnetron sputtering: the influence of self-bias voltage on reflectivity and roughness , 2001 .

[15]  J. Braat,et al.  Capping layers for extreme-ultraviolet multilayer interference coatings. , 2001, Optics letters.

[16]  M Krumrey,et al.  Radiation hardness of molybdenum silicon multilayers designed for use in a soft-x-ray projection lithography system. , 1993, Applied optics.

[17]  W. Miles Clift,et al.  Improved reflectance and stability of Mo/Si multilayers , 2001, SPIE Optics + Photonics.

[18]  R. Stuik,et al.  Progress in Mo/Si multilayer coating technology for EUVL optics , 2000, Advanced Lithography.