Screening-level estimates of indoor exposure to volatile organic compounds emitted from building materials

Knowing the value of the key mass-transfer model parameters is a critical requirement for evaluating volatile organic compound (VOC) emissions from indoor materials. The key parameters are diffusion coefficient (D), partition coefficient (K), and initial material-phase emittable concentration (C0). Although these parameters can be individually measured in the laboratory, the required time and expense are substantial. A simple method of determining D and C0 using data from ventilated chamber tests and dimensionless analysis is proposed and then validated using VOC emission data from the material emissions database developed by National Research Council Canada (NRC). The primary application of this method is to provide a rapid screening-level estimate of inhalation exposure to VOCs in building materials. Two standard scenarios using the NRC database are employed to demonstrate the value of the approach to indoor air quality assessment. The method could be a useful screening tool for assessing material emissions or environmental exposures.

[1]  Steven S. Cox,et al.  Measuring Concentrations of Volatile Organic Compounds in Vinyl Flooring , 2001, Journal of the Air & Waste Management Association.

[2]  Xudong Yang,et al.  On regression method to obtain emission parameters of building materials , 2005 .

[3]  Peder Wolkoff,et al.  Organic compounds in indoor air—their relevance for perceived indoor air quality? , 2001 .

[4]  Min Li.  Robust nonfitting way to determine mass diffusivity and initial concentration for VOCs in building materials with accuracy estimation. , 2013, Environmental science & technology.

[5]  James V. Beck,et al.  Parameter Estimation in Engineering and Science , 1977 .

[6]  Ying Xu,et al.  An improved mass transfer based model for analyzing VOC emissions from building materials , 2003 .

[7]  P Wolkoff,et al.  Do indoor chemicals promote development of airway allergy? , 2007, Indoor air.

[8]  Xudong Yang.  Study of building material emissions and indoor air quality , 1999 .

[9]  Stephen K. Brown,et al.  Concentrations of Volatile Organic Compounds in Indoor Air – A Review , 1994 .

[10]  S. Sollinger,et al.  Indoor pollution by organic emissions from textile floor coverings: Climate test chamber studies under static conditions , 1994 .

[11]  John C Little,et al.  Estimating exposure to chemical contaminants in drinking water. , 2004, Environmental science & technology.

[12]  R. E. Carlson,et al.  Monotone Piecewise Cubic Interpolation , 1980 .

[13]  Ashok J. Gadgil,et al.  Modeling Emissions of Volatile Organic Compounds from New Carpets , 1994 .

[14]  Steven S. Cox,et al.  Measuring partition and diffusion coefficients for volatile organic compounds in vinyl flooring , 2001 .

[15]  Jianlei Niu,et al.  Simultaneous estimation of VOCs diffusion and partition coefficients in building materials via inverse analysis , 2005 .

[16]  Yuan Yao,et al.  C-history method: rapid measurement of the initial emittable concentration, diffusion and partition coefficients for formaldehyde and VOCs in building materials. , 2011, Environmental science & technology.

[17]  Yinping Zhang,et al.  A rapid and accurate method, ventilated chamber C-history method, of measuring the emission characteristic parameters of formaldehyde/VOCs in building materials. , 2013, Journal of hazardous materials.

[18]  Zhishi Guo,et al.  Review of indoor emission source models. Part 2. Parameter estimation. , 2002, Environmental pollution.

[19]  Ge Yan.  Interpretation of Standard BIFMA M7.1-2007 Test Method for Determining VOC Emissions from Office Furniture Systems,Components and Seats , 2012 .

[20]  S. Nash,et al.  Numerical methods and software , 1990 .

[21]  John C. Little,et al.  Dimensionless correlations to predict VOC emissions from dry building materials , 2007 .

[22]  A. Persily,et al.  Standard formaldehyde source for chamber testing of material emissions: model development, experimental evaluation, and impacts of environmental factors. , 2013, Environmental science & technology.

[23]  Robert J. Magee,et al.  Numerical simulation of VOC emissions from dry materials , 2001 .

[24]  John C. Little,et al.  Predicting emissions of volatile and semivolatile organic compounds from building materials: A review , 2013 .

[25]  Hal Levin,et al.  Volatile organic compounds in indoor air: A review of concentrations measured in North America since 1990 , 2003 .

[26]  L. Mølhave,et al.  Volatile Organic Compounds, Indoor Air Quality and Health , 1991 .

[27]  Zhongkai He,et al.  Dynamic—static Chamber Method for Simultaneous Measurement of the Diffusion and Partition Coefficients of VOCs in Barrier Layers of Building Materials , 2010 .

[28]  F Haghighat,et al.  Measurement of diffusion coefficients of VOCs for building materials: review and development of a calculation procedure. , 2002, Indoor air.

[29]  Peder Wolkoff.  Volatile Organic Compounds Sources, Measurements, Emissions, and the Impact on Indoor Air Quality , 1995 .

[30]  Robert J. Magee,et al.  Study of Air Velocity and Turbulence Effects on Organic Compound Emissions From Building Materials/Furnishings Using a New Small Test Chamber , 1996 .

[31]  Ying Xu,et al.  Characteristics and correlations of VOC emissions from building materials , 2003 .

[32]  Chi-Chi Lin,et al.  Evaluation of impact factors on VOC emissions and concentrations from wooden flooring based on chamber tests , 2009 .