Nonleaded brass—A summary of performance and costs

[1]  Glen R. Boyd,et al.  Lead variability testing in Seattle Public Schools , 2008 .

[2]  Edward J. Calabrese,et al.  Safe Drinking Water Act , 1989 .

[3]  S. Kuyucak,et al.  A review of the machinability of copper-base alloys , 1996 .

[4]  Michael R. Schock,et al.  Lead leaching from inline brass devices: A critical evaluation of the existing standard , 2005 .

[5]  C. Giordano,et al.  The effect of Cu2+ concentration on the stress corrosion cracking susceptibility of α-brass in cupric nitrate solutions , 1997 .

[6]  David Eugene Kimbrough,et al.  Brass corrosion as a source of lead and copper in traditional and all‐plastic distribution systems , 2007 .

[7]  K. Nair,et al.  Microbiologically influenced stress corrosion cracking failure of admiralty brass condenser tubes in a nuclear power plant cooled by freshwater , 1998 .

[8]  Thurston Eric Larson,et al.  Corrosion of brass by chloramine , 1956 .

[9]  Marc Edwards,et al.  Critical evaluation of the NSF 61 Section 9 test water for Lead , 2007 .

[10]  E. Lindh-Ulmgren,et al.  Dezincification (DA) and intergranular corrosion (IGA) of brass - influence of composition and heat treatment , 2003 .

[11]  A. Westwood,et al.  Stress-corrosion cracking of copper , 1966 .

[12]  David Eugene Kimbrough,et al.  Brass Corrosion and The LCR Monitoring Program , 2001 .

[13]  V. Lucey.  The Mechanism of Dezincification and the Effect of Arsenic. I. , 1965 .

[14]  Glen R. Boyd,et al.  Lead release from new end‐use plumbing components in Seattle Public Schools , 2008 .

[15]  Jung-Gu Kim,et al.  Technical Note: Dealloying Behavior of Unleaded Brasses Containing Bismuth in Potable Water , 2001 .