Microphone with planar nano-gauge detection: fluid-structure coupling including thermoviscous effects

This article presents the modeling of a MEMS microphone with an original architecture formed of mechanical structures moving in the plane of the substrate. On the contrary of most microphones generally constituted of an oscillating membrane, some transducers developed by the CEA-LETI with M&NEMS technology use micro beams moving in the plane of the silicon wafer under the effect of an acoustical wave. These micro-structures are connected to the substrate by flexible micro-hinge and strain silicon nano-gauge producing a variation in resistance by piezoresistive effect. After the description of the design and functioning of the microphone under study, the vibroacoustic model of the fluid-structure coupling is presented. Considering the dimensions of the MEMS transducer close to the thermal and viscous boundary layers thicknesses, this model has to include diffusion phenomena. The model is discretized using the finite element method and the weak formulation is implemented using COMSOL Multiphysics® software. The pressure sensitivity of the microphone is calculated and compared with an analytical lumped model to asses the numerical model. Pressure and velocity fileds are also computed. Solutions of simulations are interpreted by focusing on phenomena influencing the sensitivity of this novel sensor design. In particular, the influence of the geometry and the role of the different part of the transducer (back cavity, mechanical structures) are studied.

[1]  K.E. Petersen,et al.  Silicon as a mechanical material , 1982, Proceedings of the IEEE.

[2]  Michel Bruneau,et al.  On the Modelling of Clamped Plates Loaded by a Squeeze Fluid Film: Application to Miniaturised Sensors , 2010 .

[3]  A. de Boer,et al.  An efficient finite element model for viscothermal acoustics , 2011 .

[4]  Neal A. Hall,et al.  Performance and Modeling of a Fully Packaged Micromachined Optical Microphone , 2011, Journal of Microelectromechanical Systems.

[5]  Weileun Fang,et al.  Design and Implementation of a Capacitive-Type Microphone With Rigid Diaphragm and Flexible Spring Using the Two Poly Silicon Micromachining Processes , 2011, IEEE Sensors Journal.

[6]  Mika Malinen,et al.  A FINITE ELEMENT METHOD FOR THE MODELING OF THERMO-VISCOUS EFFECTS IN ACOUSTICS , 2004 .

[7]  Ulrich Krumbein,et al.  The Infineon Silicon MEMS Microphone , 2013 .

[8]  Thierry Verdot,et al.  Modélisation d'une architecture innovante de microphone MEMS à détection par nano jauges , 2013 .

[9]  Jean-Louis Guyader,et al.  Sound Radiation of Plates in Thermoviscous Media , 2009 .

[10]  Masakazu Iwaki,et al.  Silicon microphone with wide frequency range and high linearity , 2007 .

[11]  Michel Bruneau,et al.  Dynamic behavior of the circular membrane of an electrostatic microphone: effect of holes in the backing electrode. , 2010, The Journal of the Acoustical Society of America.

[12]  Gerhard M. Sessler,et al.  Self‐Biased Condenser Microphone with High Capacitance , 1962 .

[13]  Peter Møller Juhl,et al.  An axisymmetric boundary element formulation of sound wave propagation in fluids including viscous and thermal losses. , 2013, The Journal of the Acoustical Society of America.

[14]  Cécile Guianvarc'h.  La cavité de couplage acoustique dans la méthode de réciprocité : modèles analytiques pour l'étalonnage des microphones et la mesure d'impédances de petits composants , 2005 .

[15]  F. Souchon,et al.  3-Axis gyroscope with Si nanogage piezo-resistive detection , 2012, 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS).

[16]  Arnaud Walther,et al.  New planar nano-gauge detection microphone: Analytical and numerical acoustic modeling , 2013 .

[17]  E. C. Wente.  A Condenser Transmitter as a Uniformly Sensitive Instrument for the Absolute Measurement of Sound Intensity , 1917 .

[18]  Nicolas Joly.  Finite Element Modeling of Thermoviscous Acoustics on Adapted Anisotropic Meshes: Implementation of the Particle Velocity and Temperature Variation Formulation , 2010 .

[19]  W. Kronast,et al.  Single-chip condenser microphone using porous silicon as sacrificial layer for the air gap , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[20]  Peter Møller Juhl,et al.  Implementation of an Acoustic 3D BEM with Visco-Thermal Losses , 2013 .

[21]  T. Brosnihan,et al.  A MEMS Condenser Microphone for Consumer Applications , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.