3D Cf/SiC-ZrC-ZrB2 composites fabricated via sol-gel process combined with reactive melt infiltration

[1]  S. Dong,et al.  3D Cf/ZrC–SiC composites fabricated with ZrC nanoparticles and ZrSi2 alloy , 2014 .

[2]  Song Wang,et al.  Fabrication of Cf/ZrC composites by infiltrating Cf/C performs with Zr–Cu alloys , 2013 .

[3]  Kezhi Li,et al.  Effects of porous C/C density on the densification behavior and ablation property of C/C–ZrC–SiC composites , 2013 .

[4]  Yiguang Wang,et al.  C/SiC–ZrB2–ZrC composites fabricated by reactive melt infiltration with ZrSi2 alloy , 2012 .

[5]  Song Wang,et al.  Preparation of carbon fiber-reinforced zirconium carbide matrix composites by reactive melt infiltration at relative low temperature , 2012 .

[6]  S. Dong,et al.  Fabrication and comparison of 3D Cf/ZrC–SiC composites using ZrC particles/polycarbosilane and ZrC precursor/polycarbosilane , 2012 .

[7]  S. Dong,et al.  Fabrication of a ZrC–SiC matrix for ceramic matrix composites and its properties , 2012 .

[8]  Lai-fei Cheng,et al.  C/C–SiC–ZrC composites fabricated by reactive melt infiltration with Si0.87Zr0.13 alloy , 2012 .

[9]  Hejun Li,et al.  Microstructure and ablation behaviors of integer felt reinforced C/C–SiC–ZrC composites prepared by a two-step method , 2012 .

[10]  S. Dong,et al.  Fabrication and Properties of 3‐D Cf/SiC–ZrC Composites, Using ZrC Precursor and Polycarbosilane , 2012 .

[11]  Zhan Wei-gang,et al.  Ablation Performances of Multi-phased C/C-ZrC-SiC Ultra-high Temperature Composites , 2011 .

[12]  Lai-fei Cheng,et al.  Reaction kinetics and ablation properties of C/C–ZrC composites fabricated by reactive melt infiltration , 2011 .

[13]  Jenn‐Ming Yang,et al.  Microstructural Characterization of a Cf/ZrC Composite Manufactured by Reactive Melt Infiltration , 2011 .

[14]  Lai-fei Cheng,et al.  Fabrication of 2D C/ZrC–SiC composite and its structural evolution under high-temperature treatment up to 1800 °C , 2009 .

[15]  Lai-fei Cheng,et al.  Ablation Resistance of Different Coating Structures for C/ZrB2–SiC Composites Under Oxyacetylene Torch Flame , 2009 .

[16]  S. Dong,et al.  Fabrication and Properties of C f /SiC-ZrC Composites , 2008 .

[17]  Jiecai Han,et al.  In situ synthesis mechanism and characterization of ZrB2–ZrC–SiC ultra high-temperature ceramics , 2008 .

[18]  A. Eckel,et al.  Oxidation Kinetics and Stress Effects for the Oxidation of Continuous Carbon Fibers within a Microcracked C/SiC Ceramic Matrix Composite , 2008 .

[19]  Ke Yang,et al.  Ablation behaviors of ultra-high temperature ceramic composites , 2007 .

[20]  A. Bellosi,et al.  The resistance to oxidation of an HfB2–SiC composite , 2005 .

[21]  T. Valente,et al.  Plasma spray deposition and high temperature characterization of ZrB2–SiC protective coatings , 2002 .

[22]  S. Dong,et al.  Fabrication and properties of 3-D Cf/ZrC–SiC composites via in-situ reaction , 2014 .

[23]  S. Dong,et al.  Fabrication of a ZrC–SiC matrix for ceramic matrix composites via in-situ reaction and its application , 2013 .

[24]  S. Dong,et al.  Microstructure observation and analysis of 3D carbon fiber reinforced SiC-based composites fabricated through filler enhanced polymer infiltration and pyrolysis , 2012 .

[25]  Jingyi Deng,et al.  Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2–SiC composites , 2009 .

[26]  William G. Fahrenholtz,et al.  Thermodynamic Analysis of ZrB2–SiC Oxidation: Formation of a SiC‐Depleted Region , 2007 .

[27]  Jonathan A. Salem,et al.  Evaluation of ultra-high temperature ceramics foraeropropulsion use , 2002 .