Exact mesh shape design of large cable-network antenna reflectors with flexible ring truss supports

An exact-designed mesh shape with favorable surface accuracy is of practical significance to the performance of large cable-network antenna reflectors. In this study, a novel design approach that could guide the generation of exact spatial parabolic mesh configurations of such reflector was proposed. By incorporating the traditional force density method with the standard finite element method, this proposed approach had taken the deformation effects of flexible ring truss supports into consideration, and searched for the desired mesh shapes that can satisfy the requirement that all the free nodes are exactly located on the objective paraboloid. Compared with the conventional design method, a remarkable improvement of surface accuracy in the obtained mesh shapes had been demonstrated by numerical examples. The present work would provide a helpful technical reference for the mesh shape design of such cable-network antenna reflector in engineering practice.

[1]  Hiroaki Tanaka,et al.  Shape control of space antennas consisting of cable networks , 2004 .

[2]  G. D. Stefanou,et al.  A general method for the analysis of cable assemblies with fixed and flexible elastic boundaries , 1995 .

[3]  Mark W. Thomson,et al.  ASTROMESH™ DEPLOYABLE REFLECTORS FOR KU- AND KA-BAND COMMERCIAL SATELLITES , 2002 .

[4]  Jaehong Lee,et al.  Geometric and material nonlinear analysis of tensegrity structures , 2011 .

[5]  Akira Meguro,et al.  Key technologies for high-accuracy large mesh antenna reflectors , 2003 .

[6]  Liu Wang,et al.  General Mesh Configuration Design Approach for Large Cable-Network Antenna Reflectors , 2014 .

[7]  Siu-Lai Chan,et al.  An integrated analysis of membrane structures with flexible supporting frames , 2004 .

[8]  Yongqiang Chen,et al.  A fast and practical method to pack spheres for mesh generation , 2008 .

[9]  Asme,et al.  A collection of technical papers : 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference : 11th AIAA/ASME/AHS Adaptive Structures Forum : 4th AIAA Gossamer Spacecraft Forum : AIAA Dynamics Specialists Conference, Norfolk, Virginia, 7-10 April 2003 , 2003 .

[10]  Li Dongxu,et al.  Engineering Notes Simple Technique for Form-Finding and Tension Determining of Cable-Network Antenna Reflectors , 2013 .

[11]  Hiroaki Tanaka,et al.  Shape Control of Cable-Network Structures Based on Concept of Self-Equilibrated Stresses , 2006 .

[12]  Pier Giorgio Malerba,et al.  An Extended Force Density Method for the form finding of cable systems with new forms , 2012 .

[13]  Tianshu Liu,et al.  Heat-Flux Measurements with Temperature-Sensitive Paint in a Mach-6 Quiet Tunnel , 2013 .

[14]  H. Schek.  The force density method for form finding and computation of general networks , 1974 .

[15]  Ivar Talvik,et al.  Finite element modelling of cable networks with flexible supports , 2001 .

[16]  Ming Xu,et al.  Equilibrium configurations of the tethered three-body formation system and their nonlinear dynamics , 2012 .

[17]  Jin Mitsugi,et al.  Static analysis of cable networks and their supporting structures , 1994 .

[18]  B. Yang,et al.  Automatic Surface Mesh Generation for Design of Space Deployable Mesh Reflectors , 2012 .

[19]  Zhao Meng-liang.  Mesh generation and preventing winding of large net-shape deployable antennas for satellite , 2006 .

[20]  Ping Yi,et al.  Validation and application of three-dimensional discontinuous deformation analysis with tetrahedron finite element meshed block , 2012 .

[21]  Mehran Mobrem.  Methods of Analyzing Surface Accuracy of Large Antenna Structures due to Manufacturing Tolerances , 2003 .

[22]  Bernard Maurin,et al.  Numerical form-finding of geotensoid tension truss for mesh reflector , 2012 .

[23]  Leopoldo Greco,et al.  On the force density method for slack cable nets , 2012 .

[24]  Wang Liu,et al.  Mesh topological form design and geometrical configuration generation for cable-network antenna reflector structures , 2013 .

[25]  Guan Fu-ling Xia Mei-meng.  Improved PSO based pretension optimum of cable net in antenna , 2013 .

[26]  Gunnar Tibert,et al.  Optimal design of tension truss antennas , 2003 .

[27]  Hiroaki Tanaka,et al.  A Design Method for Cable Network Structures Considering the Flexibility of Supporting Structures , 2008 .

[28]  A. Tibert,et al.  Review of Form-Finding Methods for Tensegrity Structures , 2003 .

[29]  Bin Chen,et al.  Aeroelastic modeling of wind loading on a cable-net supported glass wall , 2010 .

[30]  Pere Roca,et al.  A new deformable catenary element for the analysis of cable net structures , 2006 .

[31]  P. Agrawal,et al.  Preliminary design of large reflectors with flat facets , 1981 .

[32]  Feng Ruoqiang,et al.  A simplified calculating method of nonlinear frequency of cable net under mean wind load , 2006 .