Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites

In this paper, additive manufacturing technology has been used in processing carbon nanofiber (CNF) reinforced thermoplastic composites through fused deposition modeling (FDM). The effects of nanofiber concentrations, nozzle geometries on void contents, and tensile properties of FDM printed nanocomposites have been studied. The contact angles and void geometries have been characterized as a function of bead spreading orientations. Such measurements were carried out using micrographs of optical and scanning electron microscopy (SEM) examinations. The dispersion and orientation of nanofiber in polylactic acid (PLA) matrix have been studied using transmission electron microscopy observations. Finally, the fracture surfaces of both neat PLA and CNF/PLA nanocomposites have been investigated in order to understand the failure mechanism. The results show improved modulus, strength, and strain up to elastic limit in CNF/PLA nanocomposites in comparison to neat PLA matrix. The square nozzle geometry shows increased tensile strength and reduced void geometry in comparison to circular shaped nozzle. Three types of voids such as inter-bead, intra-bead, and interfacial bead were observed with total voids ranging from 24% to 30% with circular nozzle. The level of void content is reduced to about 7% for square nozzle. Contact angles and bead orientation play an important role in forming void contents. CNF/PLA nanocomposites exhibit decreased contact angle and higher void contents in comparison to neat PLA resin. Transmission electron microscopy study of CNF/PLA nanocomposites show uniform dispersion of carbon nanofibers with aligned orientation in both composite filament and three-dimensional printed specimen. Fractured surfaces of CNF/PLA nanocomposites show fiber pullout mechanism and comparatively coarse surface topography indicating higher fractured energy than neat polylactic acid resin.

[1]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[2]  Robert J. Strong,et al.  A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .

[3]  D. Baird,et al.  Thermoplastic composites reinforced with long fiber thermotropic liquid crystalline polymers for fused deposition modeling , 1998 .

[4]  W. Zhong,et al.  Short fiber reinforced composites for fused deposition modeling , 2001 .

[5]  E. Shin,et al.  Additive Manufacturing and Characterization of Ultem Polymers and Composites , 2015 .

[6]  Anna Bellini,et al.  Fused deposition of ceramics: A comprehensive experimental, analytical and computational study of material behavior, fabrication process and equipment design , 2002 .

[7]  A. F. Silva,et al.  Fused deposition modeling with polypropylene , 2015 .

[8]  A. Todoroki,et al.  3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens , 2016 .

[9]  Martin Lévesque,et al.  Direct-write fabrication of freestanding nanocomposite strain sensors , 2012, Nanotechnology.

[10]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[11]  Marinella Levi,et al.  Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling , 2015 .

[12]  W. Cong,et al.  Additive Manufacturing of CFRP Composites Using Fused Deposition Modeling: Effects of Carbon Fiber Content and Length , 2015 .

[13]  P. Dudek,et al.  FDM 3D Printing Technology in Manufacturing Composite Elements , 2013 .

[14]  Chee Kai Chua,et al.  Investigation of 3D Non-Random Porous Structures by Fused Deposition Modelling , 2002 .

[15]  L. Villalpandoa,et al.  An optimization approach for components built by fused deposition modeling with parametric internal structures , 2014 .

[16]  Hans Nørgaard Hansen,et al.  State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies , 2017 .

[17]  L. Fambri,et al.  Fused deposition modelling with ABS–graphene nanocomposites , 2016 .

[18]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[19]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[20]  Wei Jiang,et al.  3D Printable Graphene Composite , 2015, Scientific Reports.

[21]  Detlef Kochan,et al.  Laminated object manufacturing for rapid tooling and patternmaking in foundry industry , 1999 .

[22]  K. Lozano,et al.  Nanofiber-reinforced polymers prepared by fused deposition modeling , 2003 .

[23]  Designation : D 638 − 14 Standard Test Method for Tensile Properties of Plastics 1 , 2015 .

[24]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[25]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .