From Material Level to Structural Use of Mineral-Based Composites—An Overview
暂无分享,去创建一个
Thomas Blanksvärd | Björn Täljsten | Gregor Fischer | Katalin Orosz | T. Blanksvärd | B. Täljsten | G. Fischer | Kata Orosz
[2] B. Sheu,et al. Strength properties of nylon- and polypropylene-fiber-reinforced concretes , 2005 .
[3] Victor C. Li,et al. Engineered Cementitious Composites , 2010 .
[4] Jonas Holmgren,et al. Cementitious composites reinforced with continuous carbon fibres for strengthening of concrete structures , 2003 .
[5] Michael D. Lepech,et al. Field Demonstration of Durable Link Slabs for Jointless Bridge Decks Based on Strain-Hardening Cementitious Composites , 2003 .
[6] T. Triantafillou,et al. Concrete Confinement with Textile-Reinforced Mortar Jackets , 2006 .
[7] Zenon A. Zielinski,et al. Cracking of Concrete Members in Direct Tension , 1998 .
[8] Yun Mook Lim,et al. Repair and retrofit with engineered cementitious composites , 2000 .
[9] W. Keru,et al. The Influence of the Matrix-Aggregate Bond on the Strength and Brittleness of Concrete , 1987 .
[10] Thomas Blanksvärd,et al. Strengthening of concrete structures by the use of mineral based composites : system and design models for flexure and shear , 2007 .
[11] M. Raupach,et al. Application of Polymers to Textile-Reinforced Concrete , 2006 .
[12] Minoru Kunieda,et al. Evaluation of crack opening performance of a repair material with strain hardening behavior , 2008 .
[13] T. Triantafillou,et al. Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets , 2005 .
[14] Thanasis Triantafillou,et al. Textile Reinforced Mortars (TRM)versus Fiber ReinforcedPolymers (FRP) as StrengtheningMaterials of Concrete Structures , 2005, SP-230: 7th International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures.
[15] V. Li,et al. Concrete Reinforcement with Recycled Fibers , 2000 .
[16] Tadashi Saito,et al. Tensile and Anti-Spalling Properties of Direct Sprayed ECC , 2003 .
[17] T. Triantafillou. Shear Strengthening of Reinforced Concrete Beams Using Epoxy-Bonded FRP Composites , 1998 .
[18] Anders Carolin,et al. SHEAR STRENGTHENING OF CONCRETE STRUCTURES WITH THE USE OF MINERAL-BASED COMPOSITES , 2009 .
[19] Thomas Blanksvärd,et al. Mineral-Based Bonding of Carbon FRP to Strengthen Concrete Structures , 2007 .
[20] A. Wiberg. Strengthening of concrete beams using cementitious carbon fibre composites , 2003 .
[21] Regine Ortlepp,et al. Anchoring of shear strengthening for T-beams made of textile reinforced concrete (TRC) , 2008 .
[22] Mohamed Maalej,et al. Effect of Fiber Volume Fraction on the Off‐Crack‐Plane Fracture Energy in Strain ‐Hardening Engineered Cementitious Composites , 1995 .
[23] Sarah L. Billington,et al. Cyclic Response of Unbonded Posttensioned Precast Columns with Ductile Fiber-Reinforced Concrete , 2004 .
[24] M. Mirza,et al. Laboratory and field performance of polymer-modified cement-based repair mortars in cold climates , 2002 .
[25] Wolfgang Brameshuber. Textile reinforced concrete : worldwide in progress ; report on the state of the art report of RILEM technical committee 201-TRC , 2007 .
[26] H. Mihashi,et al. DFRCC Terminology and Application Concepts , 2003 .
[27] Björn Täljsten,et al. FRP strengthening of existing concrete structures : design guidelines , 2002 .
[28] Yun Mook Lim,et al. DURABLE REPAIR OF AGED INFRASTRUCTURES USING TRAPPING MECHANISM OF ENGINEERED CEMENTITIOUS COMPOSITES , 1997 .
[29] Arnon Bentur,et al. Geometrical characteristics and efficiency of textile fabrics for reinforcing cement composites , 2000 .
[30] Fin O'Flaherty,et al. Influence of elastic modulus on stress redistribution and cracking in repair patches , 2000 .
[31] Eugen Brühwiler,et al. The wedge splitting test, a new method of performing stable fracture mechanics tests , 1990 .
[32] Antonio Nanni,et al. CONCRETE REPAIR WITH EXTERNALLY BONDED FRP REINFORCEMENT , 1995 .
[33] V. Li. PERFORMANCE DRIVEN DESIGN OF FIBER REINFORCED CEMENTITIOUS COMPOSITES , 1992 .
[34] Victor C. Li,et al. Design of Engineered Cementitious Composite Suitable for Wet-Mixture Shotcreting , 2003 .
[35] Gregor Fischer,et al. Effect of fiber reinforcement on the response of structural members , 2007 .
[36] Victor C. Li,et al. Postcrack Scaling Relations for Fiber Reinforced Cementitious Composites , 1992 .
[37] James K. Wight,et al. Seismic response of exterior RC column-to-steel beam connections , 2000 .
[38] Pedro Garcés,et al. Effect of carbon fibres on the mechanical properties and corrosion levels of reinforced portland cement mortars , 2005 .
[39] Arnon Bentur,et al. Effects of Woven Fabric Geometry on the Bonding Performance of Cementitious Composites , 1998 .
[40] Victor C. Li. From Micromechanics to Structural Engineering - The Design of Cementitious Composites for Civil Engi , 1993 .
[41] P. Gleize,et al. Degradation of recycled PET fibers in Portland cement-based materials , 2005 .
[42] S. Okubo,et al. Development of recycled PET fiber and its application as concrete-reinforcing fiber , 2007 .
[43] Wolfgang Brameshuber,et al. State-of-the-Art report of RILEM Technical Committee TC 201-TRC 'Textile Reinforced Concrete' , 2006 .
[44] Gregor Fischer,et al. Influence of Matrix Ductility on Tension-Stiffening Behavior of Steel Reinforced Engineered Cementitious Composites (ECC) , 2002 .
[45] P. Bowen,et al. Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment , 2011 .
[46] I. Ahmed. Use of waste materials in highway construction , 1993 .
[47] C. Poon,et al. Properties of fly ash-modified cement mortar-aggregate interfaces , 1999 .
[48] P. Dinakar,et al. SELF-COMPACTING CONCRETE WITH FLY ASH , 2004 .
[49] Anders Carolin,et al. Carbon Fibre Reinforced Polymers for Strengthening of Structural Elements , 2003 .
[50] Lin VictorC.. REFLECTIONS ON THE RESEARCH AND DEVELOPMENT OF ENGINEERED CEMENTITIOUS COMPOSITES (ECC) , 2002 .
[51] D. Mertz,et al. Shear Strengthening of Reinforced Concrete Beams Using Externally Applied Composite Fabrics , 1995 .
[52] JCI-DFRCC Committee. DFRCC Terminology and Application Concepts , 2003 .
[53] R. Feldman,et al. Studies on mechanics of development of physical and mechanical properties of high-volume fly ash-cement pastes , 1990 .
[54] Li,et al. Engineered Cementitious Composites , 2007 .
[55] V. Li,et al. Determination of interfacial debond mode for fiber-reinforced cementitious composites , 1994 .
[56] Surendra P. Shah,et al. Relationship Between Microstructure and Mechanical Properties of Paste-Aggregate Interface , 1994 .
[57] Gregor Fischer,et al. Intrinsic Response Control of Moment Resisting Frames Utilizing Advanced Composite Materials and Structural Elements , 2003 .
[58] V. Li. Large volume, high-performance applications of fibers in civil engineering , 2002 .
[59] T. Blanksvärd,et al. Strengthening of concrete structures with cement based bonded composites , 2008 .
[60] D. Van Gemert,et al. Cement concrete and concrete-polymer composites: Two merging worlds. A report from 11th ICPIC Congress in Berlin, 2004 , 2005 .
[61] B. Mobasher,et al. Pultrusion of Fabric Reinforced High Flyash Blended Cement Composites , 2005 .
[62] Stephanie L. Walkup,et al. Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02) , 2005 .
[63] P. Pilvin,et al. Mechanical behaviour of polymer modified mortars , 2004 .
[64] V. Li,et al. Tailoring of PVA Fiber/Matrix Interface For Engineered Cementitious Composites (ECC) (Plenary Lecture) , 2003 .
[65] En-Hua Yang,et al. Designing added functions in engineered cementitious composites , 2008 .
[66] Ulrich Häußler-Combe,et al. Influence of bond properties on the tensile behaviour of Textile Reinforced Concrete , 2008 .
[67] J. Brooks,et al. Compatibility of repair mortars with concrete in a hot-dry environment , 2001 .
[68] Jonas Carlswärd,et al. Shrinkage cracking of steel fibre reinforced self compacting concrete overlays: test methods and theoretical modelling : test methods and theoretical modelling , 2006 .