Research on Grinding Robot for Trajectory Control Based on Computed Torque

In this paper, in order to achieve high-precision trajectory control of grinding robot, the method of computed torque control is proposed based on PD feedback, a single-joint robot experimental platform was built, position and velocity tracking experiment is carried out with empty Load and load. Experimental results show that the method of computed torque based on PD feedback control has the characteristic of quick response speed and small position tracking error.

[1]  V. Santibanez,et al.  Global asymptotic stability of a tracking sectorial fuzzy controller for robot manipulators , 2004, IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics).

[2]  Y. T. Wang,et al.  Path planning for robot-assisted grinding processes , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[3]  Qu Dao-kui,et al.  Research of Path Planning for Polishing Robot Based on Improved Genetic Algorithm , 2004, 2004 IEEE International Conference on Robotics and Biomimetics.

[4]  Ming J. Tsai,et al.  Development of an automatic mold polishing system , 2003, IEEE Transactions on Automation Science and Engineering.

[5]  Fusaomi Nagata,et al.  Polishing Robot Using Joystick Controlled Teaching , 2001, J. Robotics Mechatronics.