Abstract A large number of fatigue experiments on standardized samples is required for the development of databases of the fatigue properties of specific material systems. To facilitate such studies, different visual monitoring methods for surface fatigue cracks have been used; however, the problem of monitoring internal fatigue crack initiating during cold dwell fatigue of Ti is much more complicated. This paper describes the development and integration of several nondestructive evaluation methods for monitoring and sizing microcracks in titanium fatigue samples. For in situ monitoring of crack initiation and evolution ultrasonic Lamb wave signals are excited and acquired in the sample continuously during fatigue tests at different levels of fatigue load using a high-speed data acquisition system. Localization of the secondary cracks is done by both the in situ ultrasonic method and an ultrasonic immersion scanning method here referred to as “vertical C-scan” (VC-scan). The VC-scan is developed for imaging small cracks aligned normal to the fatigue sample axis. Microradiography has been performed on fatigue samples to confirm the localization and sizing of the detected cracks with other ultrasonic NDE techniques. The fusion of data from different NDE techniques provides useful information on the initiation, location, shape, size and growth history of fatigue cracks.
[1]
W. Evans,et al.
Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium alloy IMI685
,
1994
.
[2]
A. Needleman,et al.
Crack growth in lamellar titanium aluminide
,
2001
.
[3]
Jin-Yeon Kim,et al.
Surface acoustic wave measurements of small fatigue cracks initiated from a surface cavity
,
2002
.
[4]
W. Evans.
The influence of microstructure on dwell sensitive fatigue in a near alpha titanium alloy
,
1987
.
[5]
S. Rokhlin,et al.
In situ ultrasonic measurement of crack closure
,
2003
.
[6]
M. E. Kassner,et al.
Low-cycle dwell-time fatigue in Ti-6242
,
1999
.