Influence of processing route on microstructure and wear resistance of fly ash reinforced AZ31 magnesium matrix composites

[1]  Sirong Yu,et al.  Effects of Semi-solid Isothermal Heat Treatment on Microstructures and Damping Capacities of Fly Ash Cenosphere/AZ91D Composites , 2018, Acta Metallurgica Sinica (English Letters).

[2]  C. Lanzerstorfer.  Fly ash from coal combustion: Dependence of the concentration of various elements on the particle size , 2018, Fuel.

[3]  S. Aravindan,et al.  Development and characterization studies on magnesium alloy (RZ 5) surface metal matrix composites through friction stir processing , 2018, Journal of Magnesium and Alloys.

[4]  S. C. Vettivel,et al.  Characterization, formability, various stresses and failure analysis on workability of sintered Mg-5%B4C composite under triaxial stress state condition , 2018 .

[5]  Basil M. Darras,et al.  Experimental investigation of Mg/SiC composite fabrication via friction stir processing , 2017 .

[6]  K. Braszczyńska-malik,et al.  AZ91 magnesium matrix foam composites with fly ash cenospheres fabricated by negative pressure infiltration technique , 2017 .

[7]  E. Ghasali,et al.  Fabrication of magnesium-boron carbide metal matrix composite by powder metallurgy route: Comparison between microwave and spark plasma sintering , 2017 .

[8]  M. Sohi,et al.  Formations of AZ91/Al2O3 nano-composite layer by friction stir processing , 2016 .

[9]  M. Kashefi,et al.  Effect of friction stir processing pass sequence on properties of Mg–ZrSiO4–Al2O3 surface hybrid micro/nano-composites , 2016 .

[10]  M. Avettand-Fènoël,et al.  A review about Friction Stir Welding of metal matrix composites , 2016 .

[11]  A. Jarfors,et al.  A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites , 2016 .

[12]  M. Gupta,et al.  Powder metallurgy hollow fly ash cenospheres’ particles reinforced magnesium composites , 2016 .

[13]  H. Patle,et al.  Magnesium based surface metal matrix composites by friction stir processing , 2016 .

[14]  K. Dehghani,et al.  Fabrication of Mg-ZrO2 surface layer composites by friction stir processing , 2016 .

[15]  M. L. Sharon Nai,et al.  Synthesis and properties of light weight magnesium–cenosphere composite , 2016 .

[16]  N. Soltani,et al.  Development of metal-matrix composites from industrial/agricultural waste materials and their derivatives , 2016 .

[17]  Kun Wu,et al.  Electromagnetic interference shielding effectiveness of magnesium alloy-fly ash composites , 2015 .

[18]  V. Sharma,et al.  Surface composites by friction stir processing: A review , 2015 .

[19]  W. Wong,et al.  Magnesium-Based Nanocomposites: Lightweight Materials of the Future , 2015 .

[20]  I. Dinaharan,et al.  Synthesize of AZ31/TiC magnesium matrix composites using friction stir processing , 2015 .

[21]  B. C. Pai,et al.  Investigation on mechanical properties and creep behavior of stir cast AZ91-SiCp composites , 2015 .

[22]  Hamid Reza Abedi,et al.  Microstructure and mechanical properties of Mg/SiC and AZ80/SiC nano-composites fabricated through stir casting method , 2015 .

[23]  L. Y. Wang,et al.  Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing , 2014 .

[24]  A. Gerlich,et al.  Friction stir processing of Al/SiC composites fabricated by powder metallurgy , 2013 .

[25]  De-hong Lu,et al.  Wear performance of nano-Al2O3 particles and CNTs reinforced magnesium matrix composites by friction stir processing , 2013 .

[26]  A. Kokabi,et al.  Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing , 2011 .

[27]  A. R. Daud,et al.  Fly ash characterization and application in Al–based Mg alloys , 2011 .

[28]  Sirong Yu,et al.  Microstructure characterization on the formation of in situ Mg2Si and MgO reinforcements in AZ91D/Flyash composites , 2011 .

[29]  Benoit Devincre,et al.  Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations , 2010 .

[30]  Sirong Yu,et al.  Microstructures and compressive properties of AZ91D/fly-ash cenospheres composites , 2010 .

[31]  W. Poole,et al.  Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles , 2009 .

[32]  P. Rohatgi,et al.  Microstructure and mechanical behavior of die casting AZ91D-Fly ash cenosphere composites , 2009 .

[33]  J. C. Huang,et al.  Mg based nano-composites fabricated by friction stir processing , 2006 .

[34]  Andreas Mortensen,et al.  Size dependent strengthening in particle reinforced aluminium , 2002 .