Investigation of variable optimum preload for a machine tool spindle

Angular contact ball bearings have been widely used in machine tool spindles, and the bearing preload plays an important role on the performance of the spindle. With the development of high speed machining, especially for high speed milling, heavy cutting at a low speed and light cutting at a high speed are often performed on a single machine tool spindle, thus, high stiffness at low speed and low temperature rise at high speed are required. The traditional constant pressure preload method cannot meet the technical requirement of this kind of spindle any more. The variable preload technology is systematically investigated in this paper. At high speed range, FEM method is used to analyze the temperature distribution of the spindle, and the variable spindle preload is determined according to the constraint of temperature rise of bearings. At low speed range, the spindle preload is resolved by the fatigue life of bearings. The dynamic stiffness of the variable preload spindle is analyzed utilizing the Transfer Matrix Method (TMM) and a nonlinear bearing model that includes the centrifugal force and gyroscopic effects. An experimental set-up for the variable preload spindle is developed using hydraulic pressure that can automatically adjust the bearing preload. The proposed method to determine variable preload is verified experimentally by measuring the dynamic stiffness of the spindle and the temperature rise of the test bearing. The results show that the variable preload spindle gives outstanding behavior that the temperature rise at high speed is lower than that of the constant pressure preload spindle, and the dynamic stiffness at low speed range is significantly increased.

[1]  Xu Min,et al.  An improved thermal model for machine tool bearings , 2007 .

[2]  Abdallah A. Elsharkawy,et al.  Effects of axial preloading of angular contact ball bearings on the dynamics of a grinding machine spindle system , 2003 .

[3]  Yusuf Altintas,et al.  A General Method for the Modeling of Spindle-Bearing Systems , 2004 .

[4]  G. Hagiu.  Reliable high speed spindles by optimum bearings preload , 2003 .

[5]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[6]  Yeau-Ren Jeng,et al.  Investigation of the ball-bearing temperature rise under an oil-air lubrication system , 2001 .

[7]  Cheng-Hsien Wu,et al.  A parametric study on oil/air lubrication of a high-speed spindle , 2005 .

[8]  Sun-Min Kim,et al.  Prediction of thermo-elastic behavior in a spindle–bearing system considering bearing surroundings , 2001 .

[9]  Yusuf Altintas,et al.  Modeling of spindle-bearing and machine tool systems for virtual simulation of milling operations , 2007 .

[10]  Katsuhiko Nakajima,et al.  Thermal contact resistance between balls and rings of a bearing under axial, radial, and combined loads , 1995 .

[11]  A. Palmgren.  Ball and roller bearing engineering , 1945 .

[12]  Chi-Wei Lin,et al.  Model-Based Design of Motorized Spindle Systems to Improve Dynamic Performance at High Speeds , 2007 .

[13]  Hongqi Li,et al.  Analysis of bearing configuration effects on high speed spindles using an integrated dynamic thermo-mechanical spindle model , 2004 .

[14]  Heui-Jae Pahk,et al.  Thermal Error Measurement and Real Time Compensation System for the CNC Machine Tools Incorporating the Spindle Thermal Error and the Feed Axis Thermal Error , 2002 .

[15]  Chi-Wei Lin,et al.  An integrated thermo-mechanical-dynamic model to characterize motorized machine tool spindles during very high speed rotation , 2003 .

[16]  A. Palmgren,et al.  Dynamic capacity of rolling bearings , 1947 .

[17]  Hongqi Li,et al.  Integrated Dynamic Thermo-Mechanical Modeling of High Speed Spindles, Part 1: Model Development , 2004 .

[18]  J. Lieblein,et al.  Statistical Investigation of the Fatigue Life of Deep-Groove Ball Bearings , 1956 .

[19]  Frank Kreith,et al.  Convection heat transfer and flow phenomena of rotating spheres , 1963 .

[20]  Jin Kyung Choi,et al.  Thermal characteristics of the spindle bearing system with a gear located on the bearing span , 1998 .

[21]  S. A. Spiewak,et al.  Vibration based preload estimation in machine tool spindles , 2001 .

[22]  Jay F. Tu,et al.  A thermal model for high speed motorized spindles , 1999 .

[23]  Jenq-Shyong Chen,et al.  Bearing load analysis and control of a motorized high speed spindle , 2005 .