A method for estimating the parameters of electrodynamic drivers in thermoacoustic coolers.

The electroacoustic efficiency of high-power actuators used in thermoacoustic coolers may be estimated using a linear model involving a combination of six parameters. A method to identify these equivalent driver parameters from measured total electrical impedance and velocity-voltage transfer function data was developed. A commercially available, moving-magnet driver coupled to a functional thermoacoustic cooler was used to demonstrate the procedure experimentally. The method, based on linear electrical circuit theory, allowed for the possible frequency and amplitude dependence of the driver parameters to be estimated. The results demonstrated that driver parameters measured in vacuo using this method can be used to predict the driver efficiency and performance for operating conditions which may be encountered under load.

[1]  Julian R. Wright.  An Empirical Model for Loudspeaker Motor Impedance , 1990 .

[2]  John R. Bowler,et al.  A Theoretical Analysis of Eddy-Current Effects in Loudspeaker Motors , 2000 .

[3]  Oluf Jacobsen.  Measuring Loudspeaker Constants by a Transient Method , 1982 .

[4]  Stephen C. Ballister,et al.  Shipboard electronics thermoacoustic cooler , 1995 .

[5]  Morten Knudsen,et al.  Determination of Loudspeaker Driver Parameters Using a System Identification Technique , 1987 .

[6]  Harry F. Olson.  Analysis of the Effects of Nonlinear Elements Upon the Performance of a Back Enclosed Direct Radiator Loudspeaker Mechanism , 1960 .

[7]  Wolfgang Klippel,et al.  Dynamic Measurement and Interpretation of the Nonlinear Parameters of Electrodynamic Loudspeakers , 1990 .

[8]  Wakeland,et al.  Use of electrodynamic drivers in thermoacoustic refrigerators , 1999, The Journal of the Acoustical Society of America.

[9]  David Birt.  Nonlinearities in Moving Coil Loudspeakers with Overhung Voice Coils , 1991 .

[10]  Luc Mongeau,et al.  Adaptive tuning of an electrodynamically driven thermoacoustic cooler. , 2002, The Journal of the Acoustical Society of America.

[11]  Ray Scott Wakeland.  Use of electrodynamic drivers in thermoacoustic refrigerators , 1999 .

[12]  D. Blackstock.  Fundamentals of Physical Acoustics , 2000 .

[13]  A. Kaizer.  Modeling of the nonlinear response of an electrodynamic loudspeaker by a Volterra series expansion , 1987 .

[14]  Jonathan B. Scott,et al.  New Method of Characterizing Drive Linearity , 1996 .