Surface roughness and brightness of scots pine (Pinus sylvestris) applied with water-based varnish after densification and heat treatment

[1]  M. Budakçı,et al.  Effects of Thermomechanical Densification and Heat Treatment on Density and Brinell Hardness of Scots Pine (Pinus sylvestris L.) and Eastern Beech (Fagus orientalis L.) , 2015 .

[2]  Mehmet Budakçı,et al.  Effects of ThermoWood® Process Combined with Thermo-Mechanical Densification on some Physical Properties of Scots Pine (Pinus sylvestris L.) , 2014 .

[3]  Jianxiong Lu,et al.  Evaluating the effect of heat treating temperature and duration on selected wood properties using comprehensive cluster analysis , 2014, Journal of Wood Science.

[4]  E. Burdurlu,et al.  Effect of Densification Temperature and Some Surfacing Techniques on the Surface Roughness of Densified Scots Pine (Pinus sylvestris L.) , 2013 .

[5]  C. D. Del Menezzi,et al.  Effect of thermomechanical treatment on physical properties of wood veneers , 2013 .

[6]  Dick Sandberg,et al.  Thermo-hydro and thermo-hydro-mechanical wood processing: An opportunity for future environmentally friendly wood products , 2013 .

[7]  M. Budakçı,et al.  Effect of Thermal Ageing on the Gloss and the Adhesion Strength of the Wood Varnish Layers , 2013 .

[8]  Cláudio Henrique Soares Del Menezzi,et al.  PROPERTIES OF THERMO-MECHANICALLY TREATED WOOD FROM PINUS CARIBAEA VAR. HONDURENSIS , 2012 .

[9]  A. C. Ilçe,et al.  Evaluating the surface roughness of heat-treated wood cut with different circular saws , 2011, BioResources.

[10]  M. Budakçı,et al.  THE EFFECT OF MOISTURE CONTENT OF THE WOOD ON LAYER PERFORMANCE OF WATER BORNE VARNISHES , 2011 .

[11]  A. Aksoy,et al.  COLOUR AND GLOSS CHANGES OF SOCTS PINE AFTER HEAT MODIFICATION , 2011 .

[12]  M. Bayram,et al.  Effect of wood moisture content on adhesion of varnish coatings , 2009 .

[13]  M. Boonstra,et al.  A two-stage thermal modification of wood , 2008 .

[14]  M. Gong,et al.  Optimization of pressing parameters for mechanically surface-densified aspen , 2007 .

[15]  Dick Sandberg,et al.  Introduction to thermo-hydro-mechanical (THM) wood processing , 2007 .

[16]  H. Pereira,et al.  Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood , 2007, Wood Science and Technology.

[17]  U. Bexell,et al.  Effects of semi-isostatic densification on anatomy and cell-shape recovery on soaking , 2006 .

[18]  Cevdet Sogutlu,et al.  The Effect of Some Factors on Surface Roughness of Sanded Wood Material , 2005 .

[19]  Roger M. Rowell,et al.  Handbook of wood chemistry and wood composites. , 2005 .

[20]  P. Bekhta,et al.  Effect of High Temperature on the Change in Color, Dimensional Stability and Mechanical Properties of Spruce Wood , 2003 .

[21]  A. Sönmez,et al.  Durability of varnishes used on surfaces of wooden furniture against important physical, mechanical and chemical effects. , 1990 .

[22]  Alfred J. Stamm,et al.  Principles of Wood Science and Technology , 2013, Springer Berlin Heidelberg.

[23]  M. A. Millett,et al.  Heat-stabilized compressed wood (staypak) , 1956 .