Ordered assemblies of clay nano-platelets

We demonstrate five methods of arranging smectite clay tactoids into layered arrangements as a part of the quest for the biomimetic simulation of nacre. Provided the clay is not fully exfoliated, the tactoids retain sufficient rigidity for alignment and we present micrographs which demonstrate these ordered structures. This paves the way for exploration of the high mineral filler end of polymer-clay nanocomposites which can approach the high aragonite volume fraction of nacre. The clay was dispersed in water without additives by ultrasonic agitation, cleaned by partial sedimentation and the resulting suspension was subjected to controlled phase separation by sedimentation, centrifugation, controlled rate slip casting, filtration and electrophoresis. Well-aligned parallel layers of platelets were obtained from all the five methods, the best stacking being associated with slip cast layers. Polyethylene oxide was incorporated into these well-aligned tactoids.

[1]  Steve Weiner,et al.  Mollusk shell formation: a source of new concepts for understanding biomineralization processes. , 2006, Chemistry.

[2]  B. Smit,et al.  Hysteresis in clay swelling induced by hydrogen bonding: accurate prediction of swelling states. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[3]  Xiaodong Li,et al.  In situ observation of nanograin rotation and deformation in nacre. , 2006, Nano letters.

[4]  C. Chu,et al.  First isolation of individual silicate platelets from clay exfoliation and their unique self-assembly into fibrous arrays. , 2006, The journal of physical chemistry. B.

[5]  Peter V. Coveney,et al.  Simulation of hydrated Li+-, Na+- and K+-montmorillonite/polymer nanocomposites using large-scale molecular dynamics , 2004 .

[6]  Zhiyong Tang,et al.  Nanostructured artificial nacre , 2003, Nature materials.

[7]  Thomas E. Mallouk,et al.  Layer-by-Layer Assembly of Intercalation Compounds and Heterostructures on Surfaces: Toward Molecular "Beaker" Epitaxy , 1994 .

[8]  C. Brinker,et al.  Continuous self-assembly of organic–inorganic nanocomposite coatings that mimic nacre , 1998, Nature.

[9]  Xavier Bourrat,et al.  Multiscale structure of sheet nacre. , 2005, Biomaterials.

[10]  G. Lagaly,et al.  Sol–gel transitions of sodium montmorillonite dispersions , 2000 .

[11]  Janet B. Davis,et al.  Fabrication and Crack Deflection in Ceramic Laminates with Porous Interlayers , 2004 .

[12]  Paul K. Hansma,et al.  Does Abalone Nacre Form by Heteroepitaxial Nucleation or by Growth through Mineral Bridges , 1997 .

[13]  B. Chen,et al.  On the thermodynamic driving force for polymer intercalation in smectite clays , 2005 .

[14]  Jingwei Zhang,et al.  Preparation and characterization of self-assembled organic–inorganic nacre-like nanocomposite thin films , 2004 .

[15]  F. Cui,et al.  Crystal orientation, toughening mechanisms and a mimic of nacre , 2000 .

[16]  S. Mann,et al.  Template‐directed nucleation and growth of inorganic materials , 1994 .

[17]  John Evans,et al.  Poly(ε-caprolactone) - Clay nanocomposites: Structure and mechanical properties , 2006 .

[18]  P. Aranda,et al.  Poly(ethylene oxide)-silicate intercalation materials , 1992 .

[19]  Paul K. Hansma,et al.  Methods for fabricating and characterizing a new generation of biomimetic materials , 1999 .

[20]  Anand Jagota,et al.  Fracture of Glass/Poly(vinyl butyral) (Butacite®) Laminates in Biaxial Flexure , 1999 .

[21]  A. Patil,et al.  Fabrication of functional protein–organoclay lamellar nanocomposites by biomolecule-induced assembly of exfoliated aminopropyl-functionalized magnesium phyllosilicates , 2005 .

[22]  Bruce Dunn,et al.  Continuous formation of supported cubic and hexagonal mesoporous films by sol–gel dip-coating , 1997, Nature.

[23]  Van Vlack,et al.  MATERIALS SCIENCE FOR ENGINEERS , 1970 .

[24]  David L. Kaplan,et al.  Mollusc shell structures: novel design strategies for synthetic materials , 1998 .

[25]  M. Darder,et al.  Functional biopolymer nanocomposites based on layered solids , 2005 .

[26]  A K Soh,et al.  Structural and mechanical properties of the organic matrix layers of nacre. , 2003, Biomaterials.

[27]  G. Lagaly.  Principles of flow of kaolin and bentonite dispersions , 1989 .

[28]  J. Vincent,et al.  Systematic technology transfer from biology to engineering , 2002, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[29]  J. Bonnet,et al.  Montmorillonite based artificial nacre prepared via a drying process , 2006 .

[30]  K. Katti,et al.  Dynamic nanomechanical response of nacre , 2006 .

[31]  Biqiong Chen,et al.  Nominal and effective volume fractions in polymer-clay nanocomposites , 2006 .