Nonlinear model predictive control of a dual-independent variable valve timing engine with electronic throttle control

Significant excursions of engine variables occur during fast transients because of slow actuator responses and system dynamics. This creates adverse effects on dynamic performance and often causes emissions penalties. The challenge is particularly pronounced in engines with an increased number of actuators. In this paper, non-linear model predictive control (NMPC) is introduced to improve the dynamic response of a flexible engine system. NMPC combines advantages of both feed forward and feedback control while considering their constraints. The length of control horizon and prediction horizon are determined to achieve the dead-beat-like optimal control during transients and ensure smooth responses. The NMPC significantly improves the engine torque response and minimizes the excursions of in-cylinder variables under highly transient operation by adjusting each actuator control input simultaneously to achieve the control objectives.

[1]  B. W. Millington,et al.  FRICTIONAL LOSSES IN DIESEL ENGINES , 1968 .

[2]  Zoran Filipi,et al.  High-Degree-of-Freedom Engine Modelling for Control Design Using a Crank-Angle-Resolved Flame Propagation Simulation and Artificial Neural Network Surrogate Models , 2010 .

[3]  Anna G. Stefanopoulou,et al.  Modeling and control of advanced technology engines. , 1996 .

[4]  Eduardo Fernandez-Camacho,et al.  Model Predictive Control in the Process Industry , 1995 .

[5]  Mrdjan Jankovic,et al.  Constructive Lyapunov control design for turbocharged diesel engines , 2000, IEEE Trans. Control. Syst. Technol..

[6]  Dieter W. Guenther,et al.  MOTRONIC - Torque Guided Engine Management Systems to Meet Future Challenges in Emissions and Fuel Consumption Reduction , 2000 .

[7]  Ulf Holmberg,et al.  Different Strategies for Transient Control of the Air-Fuel Ratio in a SI Engine , 2000 .

[8]  Christopher M. Atkinson,et al.  Dynamic Model-Based Calibration Optimization: An Introduction and Application to Diesel Engines , 2005 .

[9]  Kenneth R. Butts,et al.  Feedforward and feedback design for engine idle speed control using ℓ1 optimization , 1995 .

[10]  G. Corde,et al.  Transient control of a Diesel engine airpath , 2007, 2007 American Control Conference.

[11]  Zoran Filipi,et al.  Optimal Calibration of high DOF Engines Considering Fuel Economy and Combustion Stability , 2009 .

[12]  C. R. Ferguson,et al.  A Turbulent Entrainment Model for Spark-Ignition Engine Combustion , 1977 .

[13]  Torsten Bertram,et al.  CARTRONIC - An Open Architecture for Networking the Control Systems of an Automobile , 1998 .

[14]  M.J. Grimble,et al.  Model-Based Nonlinear Multivariable Engine Control , 2007, 2007 American Control Conference.

[15]  Zoran Filipi,et al.  Improving the predictiveness of the quasi-d combustion model for spark ignition engines with flexible intake systems , 2011 .

[16]  Anna G. Stefanopoulou,et al.  Control-Oriented Model of a Dual Equal Variable Cam Timing Spark Ignition Engine , 1998 .

[17]  Luigi del Re,et al.  Predictive Control of a Diesel Engine Air Path , 2007, IEEE Transactions on Control Systems Technology.

[18]  A. J. Beaumont,et al.  An Approach to Torque-Based Engine Management Systems , 2001 .

[19]  Ronald Soeterboek,et al.  Predictive Control: A Unified Approach , 1992 .

[20]  A. Ekdahl.  Transient control of variable geometry turbine on heavy duty diesel engines , 2005, Proceedings of 2005 IEEE Conference on Control Applications, 2005. CCA 2005..

[21]  James Sinnamon.  Co-Simulation Analysis of Transient Response and Control for Engines with Variable Valvetrains , 2007 .

[22]  Eduardo F. Camacho,et al.  Model predictive control in the process industry , 1995 .

[23]  Rolf Findeisen,et al.  Nonlinear model predictive control of a turbocharged diesel engine , 2006, 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control.

[24]  Lino Guzzella,et al.  Introduction to Modeling and Control of Internal Combustion Engine Systems , 2004 .

[25]  R. Johansson,et al.  Model predictive Control of Homogeneous Charge Compression Ignition (HCCI) engine dynamics , 2006, 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control.

[26]  Jing Sun,et al.  Feedforward and feedback design for engine idle speed control using l/sub 1/ optimization , 1995, Proceedings of 1995 American Control Conference - ACC'95.

[27]  Anna G. Stefanopoulou,et al.  Multivariable controller structure in a variable cam timing engine with electronic throttle and torque feedback , 1999, Proceedings of the 1999 IEEE International Conference on Control Applications (Cat. No.99CH36328).

[28]  Craig T. Bowman,et al.  Kinetics of pollutant formation and destruction in combustion , 1975 .

[29]  Manfred Morari,et al.  Truncated step response models for model predictive control , 1993 .

[30]  Michael Hafner,et al.  STEPS TOWARDS AN OPTIMIZATION OF THE DYNAMIC EMISSION BEHAVIOR OF IC ENGINES: Measurement Strategies - Modeling - Model Based Optimization , 2001 .

[31]  Ben Shannon,et al.  Further refinement and validation of a turbulent flame propagation model for spark-ignition engines , 1980 .

[32]  Basil Kouvaritakis,et al.  Nonlinear predictive control : theory and practice , 2001 .

[33]  A. Zheng,et al.  A computationally efficient nonlinear MPC algorithm , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[34]  John B. Heywood,et al.  The Effect of Chamber Geometry on Spark-Ignition Engine Combustion , 1983 .

[35]  Anna G. Stefanopoulou,et al.  Variable camshaft timing engine control , 2000, IEEE Trans. Control. Syst. Technol..