Performance-Based Optimization for Strut-Tie Modeling of Structural Concrete

Conventional trial-and-error methods are not efficient in developing appropriate strut-and-tie models in complex structural concrete members. This paper describes a performance-based optimization ~PBO! technique for automatically producing optimal strut- and-tie models for the design and detailing of structural concrete. The PBO algorithm utilizes the finite element method as a modeling and analytical tool. Developing strut-and-tie models in structural concrete is treated as an optimal topology design problem of continuum structures. The optimal strut-and-tie model that idealizes the load transfer mechanism in cracked structural concrete is generated by gradually removing regions that are ineffective in carrying loads from a structural concrete member based on overall stiffness performance criteria. A performance index is derived for evaluating the performance of strut-and-tie systems in an optimization process. Fundamental concepts underlying the development of strut-and-tie models are introduced. Design examples of a low-rise concrete shearwall with openings and a bridge pier are presented to demonstrate the validity and effectiveness of the PBO technique as a rational and reliable design tool for structural concrete.

[1]  Jorg Schlaich,et al.  Design and detailing of structural concrete using strut-and-tie models , 1991 .

[2]  Julio A. Ramirez,et al.  COMPUTER GRAPHICS IN DETAILING STRUT-TIE MODELS , 1992 .

[3]  Yi Min Xie,et al.  Optimal topology selection of continuum structures with displacement constraints , 2000 .

[4]  N. Kikuchi,et al.  A homogenization method for shape and topology optimization , 1991 .

[5]  Young Mook Yun.  Computer Graphics for Nonlinear Strut-Tie Model Approach , 2000 .

[6]  Julio A. Ramirez.  Strut-Tie Shear Design of Pretensioned Concrete , 1994 .

[7]  Y. Xie,et al.  A simple evolutionary procedure for structural optimization , 1993 .

[8]  M. Zhou,et al.  Generalized shape optimization without homogenization , 1992 .

[9]  Peter Marti,et al.  BASIC TOOLS OF REINFORCED CONCRETE BEAM DESIGN , 1985 .

[10]  James R. Cagley.  Changing from ACI 318-99 to ACI 318-02 -- What's New? , 2001 .

[11]  M. Bendsøe,et al.  Optimal design of material properties and material distribution for multiple loading conditions , 1995 .

[12]  H Kupfer.  GENERALIZATION OF MORSCH'S TRUSS ANALOGY USING THE PRINCIPLE OF MINIMUM STRAIN ENERGY , 1964 .

[13]  N. Kikuchi,et al.  Solutions to shape and topology eigenvalue optimization problems using a homogenization method , 1992 .

[14]  J Schlaich,et al.  TOWARD A CONSISTENT DESIGN OF STRUCTURAL CONCRETE , 1987 .

[15]  George I. N. Rozvany,et al.  Layout Optimization of Structures , 1995 .

[16]  John E. Breen,et al.  Post-Tensioned Anchorage Zones with Single Straight Concentric Anchorages , 1997 .

[17]  Ren-Jye Yang,et al.  Optimal topology design using linear programming , 1994 .

[18]  Yi Min Xie,et al.  Optimal Topology Design of Bracing Systems for Multistory Steel Frames , 2000 .

[19]  Ichiro Hagiwara,et al.  Static and vibrational shape and topology optimization using homogenization and mathematical programming , 1993 .

[20]  W Ritter,et al.  DIE BAUWEISE HENNEBIQUE (HENNEBIQUES CONSTRUCTION METHOD) , 1899 .

[21]  N. Olhoff,et al.  Optimum topology and reinforcement design of disk and plate structures with multiple stiffness and eigenfrequency objectives , 1999 .

[22]  Michael P. Collins,et al.  SHEAR AND TORSION DESIGN OF PRESTRESSED AND NON PRESTRESSED CONCRETE BEAMS , 1980 .

[23]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[24]  N. Kikuchi,et al.  Topological design for vibrating structures , 1995 .

[25]  R. Haftka,et al.  Structural shape optimization — a survey , 1986 .

[26]  Uri Kirsch,et al.  Optimal Design Based on Approximate Scaling , 1982 .

[27]  Yi Min Xie,et al.  Topology Optimization of Strut-and-Tie Models in Reinforced Concrete Structures Using an Evolutionary Procedure , 2000 .

[28]  Qing Quan Liang,et al.  Performance-based optimization method for structural topology and shape design , 2001 .

[29]  M. Bendsøe,et al.  Shape optimization of structures for multiple loading conditions using a homogenization method , 1992 .

[30]  Yi Min Xie,et al.  Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization , 2001 .

[31]  Richard N. White,et al.  Automatic Generation of Truss Model for Optimal Design of Reinforced Concrete Structures , 1998 .

[32]  H. Mlejnek,et al.  An engineer's approach to optimal material distribution and shape finding , 1993 .

[33]  C. Mattheck,et al.  SKO (soft kill option): the biological way to find an optimum structure topology , 1992 .

[34]  Yi Min Xie,et al.  Optimal selection of topologies for the minimum-weight design of continuum structures with stress constraints , 1999 .

[35]  Bruno Thürlimann,et al.  Ultimate Strength and Design of Reinforced Concrete Beams in Torsion and Bending , 1972 .

[36]  F. Leondardt,et al.  Reducing the shear reinforcement in reinforced concrete beams and slabs , 1965 .

[37]  William L. Gamble,et al.  RECENT APPROACHES TO SHEAR DESIGN OF STRUCTURAL CONCRETE. DISCUSSIONS AND CLOSURES , 2000 .

[38]  Prabhat Kumar.  Optimal force transmission in reinforced concrete deep beams , 1978 .

[39]  John E. Breen,et al.  Evaluation of a Modified Truss-Model Approach for Beams in Shear , 1991 .