Some aspects of the electromechanical design of high-speed microturbines for power generation

[1]  I. Takahashi,et al.  A super high speed PM motor drive system by a quasi-current source inverter , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[2]  Thomas A. Lipo,et al.  Material-Efficient Permanent-Magnet Shape for Torque Pulsation Minimization in SPM Motors for Automotive Applications , 2014, IEEE Transactions on Industrial Electronics.

[3]  F. Profumo,et al.  About the design of very high frequency induction motors for spindle applications , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[4]  Abdeslam Mebarki,et al.  Optimal design of a high speed concentrated wound PMSM , 2009, 2009 International Conference on Electrical Machines and Systems.

[5]  Giovanni Cerri,et al.  A simulation tool for concentrated solar power based on micro gas turbine engines , 2018, Energy Conversion and Management.

[6]  Elineudo Pinho de Moura,et al.  Classification of imbalance levels in a scaled wind turbine through detrended fluctuation analysis of vibration signals , 2016 .

[7]  Bulent Sarlioglu,et al.  High speed electric machines — Challenges and design considerations , 2014, 2014 International Conference on Electrical Machines (ICEM).

[8]  Dieter Gerling,et al.  Comparison of state-of-the-art high-speed high-power machines: Research study including a design example of a 50000 rpm induction machine , 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society.

[9]  David Gerada,et al.  Electrical Machines for Automotive Electrically Assisted Turbocharging , 2018, IEEE/ASME Transactions on Mechatronics.

[10]  Liping Zheng,et al.  A Highly Efficient 200 000 RPM Permanent Magnet Motor System , 2007, IEEE Transactions on Magnetics.

[11]  Marcelo G. Molina,et al.  Biogas production from grape pomace: Thermodynamic model of the process and dynamic model of the power generation system , 2012 .

[12]  Juha Pyrhonen,et al.  Design of Rotating Electrical Machines: Pyrhönen/Design , 2013 .

[13]  Zhenya Liu,et al.  Innovation in Global Energy Interconnection Technologies , 2016 .

[14]  Zhenfei Chen,et al.  A harmonic current injection method for electromagnetic torque ripple suppression in permanent-magnet synchronous machines , 2017 .

[15]  Shukang Cheng,et al.  Thermal analysis of high speed permanent magnetic generator , 2012 .

[16]  Juha Pyrhonen,et al.  Comparison of high-speed electrical motors for a turbo circulator application , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[17]  Yüksel Oğuz,et al.  Adaptive neuro-fuzzy inference system to improve the power quality of a split shaft microturbine power generation system , 2012 .

[18]  V. I. Ugursal,et al.  Residential cogeneration systems: Review of the current technology , 2006 .

[19]  J.W. Kolar,et al.  Design of a 100 W, 500000 rpm permanent-magnet generator for mesoscale gas turbines , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[20]  Zainal Alimuddin Zainal,et al.  Micro gas turbine running on naturally aspirated syngas: An experimental investigation , 2018 .

[21]  Daming Zhang.  Magnetic skin effect in silicon-iron core at power frequency , 2000 .

[22]  M.A. Rahman,et al.  Super high speed electrical machines - summary , 2004, IEEE Power Engineering Society General Meeting, 2004..

[23]  Alistair J. Davidson,et al.  Lead batteries for utility energy storage: A review , 2018 .

[24]  Antonio Cesar Pinho Brasil Junior,et al.  On the electromechanical behavior of hydrokinetic turbines , 2016 .

[25]  Cheol Hoon Park,et al.  Design Aspects of High-Speed Electrical Machines With Active Magnetic Bearings for Compressor Applications , 2017, IEEE Transactions on Industrial Electronics.

[26]  Emil Kurvinen,et al.  Multidisciplinary Design Process of a 6-Slot 2-Pole High-Speed Permanent-Magnet Synchronous Machine , 2016, IEEE Transactions on Industrial Electronics.

[27]  Dale T. Bradshaw,et al.  DOE/EPRI Electricity Storage Handbook in Collaboration with NRECA , 2016 .

[28]  Alessandro Vigliani,et al.  Electrical Machines for High-Speed Applications: Design Considerations and Tradeoffs , 2014, IEEE Transactions on Industrial Electronics.

[29]  M.O.A. Mokhtar.  Floating ring journal bearings: theory, design and optimization , 1981 .

[30]  Do-Kwan Hong,et al.  Development of a super high speed motor-generator and controller , 2014 .

[31]  Sang-Yong Jung,et al.  Design of IPMSM Applying V-Shape Skew Considering Axial Force Distribution and Performance Characteristics According to the Rotating Direction , 2016, IEEE Transactions on Applied Superconductivity.

[32]  Ji-Min Kim,et al.  Design of an Ultra-High-Speed Permanent-Magnet Motor for an Electric Turbocharger Considering Speed Response Characteristics , 2017, IEEE/ASME Transactions on Mechatronics.

[33]  E. Roth,et al.  Thermal conductivity of Inconel 718 and 304 stainless steel , 1987 .

[34]  Luis San Andrés,et al.  Test Response and Nonlinear Analysis of a Turbocharger Supported on Floating Ring Bearings , 2005 .

[35]  Philippe Enrici,et al.  Study of eddy-current loss in the sleeves and Sm–Co magnets of a high-performance SMPM synchronous machine (10 kRPM, 60 kW) , 2017 .

[36]  H. Shokrollahi,et al.  Soft magnetic composite materials (SMCs) , 2007 .

[37]  T. Noguchi,et al.  Development of 150000 r/min, 1.5 kW Permanent-Magnet Motor for Automotive Supercharger , 2007, 2007 7th International Conference on Power Electronics and Drive Systems.

[38]  N. Bianchi,et al.  Analysis and design of a PM Brushless Motor for high-speed operations , 2005, IEEE Transactions on Energy Conversion.

[39]  S. K. Kim,et al.  Simulation and Experimental Demonstration of a Large-Scale HTS AC Induction Furnace for Practical Design , 2016, IEEE Transactions on Applied Superconductivity.

[40]  Francesco Cupertino,et al.  Design Procedure for High-Speed PM Motors Aided by Optimization Algorithms , 2018 .

[41]  P. A. Pilavachi.  Mini- and micro-gas turbines for combined heat and power , 2002 .

[42]  Aki Grönman,et al.  Design and experiments of two-stage intercooled electrically assisted turbocharger , 2016 .

[43]  Jian-Xin Shen,et al.  High-speed permanent magnet electrical machines — applications, key issues and challenges , 2018 .

[44]  J.W. Kolar,et al.  Megaspeed Drive Systems: Pushing Beyond 1 Million r/min , 2009, IEEE/ASME Transactions on Mechatronics.

[45]  Azauri Albano de Oliveira,et al.  Electromagnetic torque ripple and copper losses reduction in permanent magnet synchronous machines , 2012 .

[46]  Z Kolondzovski,et al.  Power Limits of High-Speed Permanent-Magnet Electrical Machines for Compressor Applications , 2011, IEEE Transactions on Energy Conversion.

[47]  A. Arkkio,et al.  Induction and permanent-magnet synchronous machines for high-speed applications , 2005, 2005 International Conference on Electrical Machines and Systems.

[48]  Braz de Jesus Cardoso Filho,et al.  Experimental performance of a low cost micro-CAES generation system , 2016 .

[49]  Francisco Jurado,et al.  Biomass based micro-turbine plant and distribution network stability , 2004 .

[50]  V. N. Antipov,et al.  High-speed electrical machines for power engineering: Current state and development trends , 2007 .

[51]  Braz de Jesus Cardoso Filho,et al.  Test and simulation of an electric generator driven by a micro-turbine , 2017 .

[52]  Aynur Makhmut Yakupov,et al.  Investigation of distributed power generation based on renewable energy sources and hydrogen batteries , 2017 .

[53]  Christos Katsanos,et al.  Simulation of a heavy-duty diesel engine with electrical turbocompounding system using operating charts for turbocharger components and power turbine , 2013 .

[54]  Andrea Cavagnino,et al.  High-Speed Electrical Machines: Technologies, Trends, and Developments , 2014, IEEE Transactions on Industrial Electronics.

[55]  Hamid Lesani,et al.  Optimal design of the generator of microturbine using genetic algorithm and PSO , 2010 .

[56]  Meng Choung Chiong,et al.  Liquid biofuels production and emissions performance in gas turbines: A review , 2018, Energy Conversion and Management.

[57]  Simon Barrans,et al.  Mechanical design of rotors for permanent magnet high-speed electric motors for turbocharger applications , 2017 .

[58]  R. Moghaddam.  High speed operation of electrical machines, a review on technology, benefits and challenges , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[59]  Haibing Wang,et al.  A novel power market clearing model based on the equilibrium principle in microeconomics , 2017 .

[60]  Yuning Zhang,et al.  Experimental study on the vibrational performance and its physical origins of a prototype reversible pump turbine in the pumped hydro energy storage power station , 2019, Renewable Energy.