High Strain Compression Response of Affordable Woven Carbon/Epoxy Composites

This paper discusses the experimental study on the response of affordable plain and satin weave carbon/epoxy composite laminates subjected to high strain rate compression loading using a modified Compression Split Hopkinson’s Pressure Bar (SHPB). 37 layer laminates were manufactured using aerospace grade woven fabrics with SC-15 epoxy resin system utilizing Vacuum Assisted Resin Infusion Molding (VARIM) approach. Samples were subjected to high strain rate compression loading at five different strain rates ranging from 17/s to 817/s in the in-plane as well as through-the-thickness directions using a modified SHPB that facilitates controlled single pulse loading of the sample. High strain rate response was compared with that of static compression. Optical microscopy was used to characterize the failure mechanisms. Results of the study indicate considerable increase in dynamic compression peak stress as compared to static loading, whereas the strain at peak stress was lower by 35-65%. Samples loaded through-the-thickness exhibit higher peak stresses as compared to those loaded in the in-plane direction.

[1]  Shaik Jeelani,et al.  High strain rate compression response of carbon/epoxy laminate composites , 2001 .

[2]  J. Lambros,et al.  Dynamic thermomechanical behavior of fiber reinforced composites , 2000 .

[3]  U. Vaidya,et al.  Static and high strain rate compression response of thick section twill weave S-2 glass/vinyl , 1999 .

[4]  Isaac M Daniel,et al.  Strain Rate Effects on the Transverse Compressive and Shear Behavior of Unidirectional Composites , 1999 .

[5]  C. A. Weeks,et al.  Modeling non-linear rate-dependent behavior in fiber-reinforced composites , 1998 .

[6]  R. L. Sierakowski,et al.  Strain Rate Effects in Composites , 1997 .

[7]  A. El-Habak.  Compressive Resistance of Unidirectional GFRP Under High Rate of Loading , 1993 .

[8]  J. Harding,et al.  Effect of strain rate and specimen geometry on the compressive strength of woven glass-reinforced epoxy laminates , 1993 .

[9]  Sia Nemat-Nasser,et al.  Hopkinson techniques for dynamic recovery experiments , 1991, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[10]  S. Ramakrishma.  Journal of Composites Technology and Research Author Index to Volume 25 2003 , 2003 .

[11]  Exposition,et al.  High strain rate effects on polymer, metal and ceramic matrix composites and other advanced materials : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California , 1995 .

[12]  G. Palmese,et al.  Relationship Between Interphase Composition, Material Properties, and Residual Thermal Stresses in Composite Materials , 1995 .

[13]  CJ Williams,et al.  A Method for Evaluating the High Strain Rate Compressive Properties of Composite Materials , 1992 .