Measurement and calculation of oil film thickness in a ball bearing

Purpose The oil film thickness provides a key performance indicator of a ball bearing lubrication condition. This paper aims to propose an approach to calculate and measure the oil film thickness of the bearing. Design/methodology/approach On a specially designed test rig, measurement of the capacitance is used to monitor the oil film thickness of ball bearing. A corrected film thickness formula taking account of the influences of non-Newtonian shear thinning and thermal is introduced to predict the oil film thickness of ball bearing. And then the film thickness distribution and the corresponding capacitances are calculated. Findings Measurement and calculation of oil film thickness in a ball bearing are carried out under various rotating speeds and external loads. By comparing the calculated capacitances with measured results, it can be concluded that the calculated results obtained by the amended film thickness formula are much closer to the test findings than the classical computed values according to Hamrock–Dowson. Originality/value A new corrected film thickness formula is introduced in predicting oil film thickness of ball bearing and verified by the series of experiments according to capacitance method.

[1]  A. Wilson.  The Relative Thickness of Grease and Oil Films in Rolling Bearings , 1979 .

[2]  Michael M. Khonsari,et al.  On the elastohydrodynamic analysis of shear-thinning fluids , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[3]  A. Olver,et al.  Experimental Investigation of Elastohydrodynamic (EHD) Film Thickness Behavior at High Speeds , 2010 .

[4]  S. Bair,et al.  A Simple Formula for EHD Film Thickness of Non-Newtonian Liquids , 1997 .

[5]  Qingfeng Meng,et al.  Ultrasonic measurement of oil film thickness between the roller and the inner raceway in a roller bearing , 2015 .

[6]  Experimental Investigation of the Effect of Speed and Load on Film Thickness in Elastohydrodynamic Contact , 2005 .

[7]  R. S. Dwyer-Joyce,et al.  The measurement of lubricant–film thickness using ultrasound , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[8]  Scott Bair,et al.  A Simple Calculation of EHL Traction at Small Slide/Roll Ratio Including Roller Elasticity , 2005 .

[9]  R. Larsson,et al.  Effects of slide-roll ratio and lubricant properties on elastohydrodynamic lubrication film thickness and traction , 2001 .

[10]  Wassim Habchi,et al.  A Film Thickness Correction Formula for Double-Newtonian Shear-Thinning in Rolling EHL Circular Contacts , 2012, Tribology Letters.

[11]  P. K. Gupta,et al.  Viscoelastic Effects in MIL-L-7808-Type Lubricant, Part I: Analytical Formulation , 1992 .

[12]  A. Pettersson.  Properties of base fluids for environmentally adapted lubricants , 2001 .

[13]  Philippe Vergne,et al.  A unified shear-thinning treatment of both film thickness and traction in EHD , 2005, 0704.1798.

[14]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[15]  Michael M. Khonsari,et al.  EHL Circular Contact Film Thickness Correction Factor for Shear-Thinning Fluids , 2008 .

[16]  Jiujun Xu,et al.  Lubrication film thickness calculation from contact resistance measurement in point contact , 2016 .

[17]  D. Dowson,et al.  Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results , 1976 .

[18]  B. Ponick,et al.  Capacitances and lubricant film thicknesses of motor bearings under different operating conditions , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[19]  Michael M. Khonsari,et al.  An Experimental Validation of the Recently Discovered Scale Effect in Generalized Newtonian EHL , 2009 .

[20]  H. Naylor,et al.  Paper 10: The Measurement of Oil-Film Thickness in Elastohydrodynamic Contacts: , 1965 .

[21]  Peng-shun Zhang,et al.  A new measurement method of oil film thickness in the EHL condition: the R-C oscillation technique , 1991 .

[22]  K. Yagi,et al.  Influence of temperature distributions in EHL film on its thickness under high slip ratio conditions , 2007 .

[23]  Martin Hartl,et al.  Experimental study of starved EHL contacts based on thickness of oil layer in the contact inlet , 2013 .