Deterministic and stochastic analyses of fracture processes in a brittle microstructure system

Variations in constituent properties, phase morphology, and phase distribution cause deformation and failure at the microstructural level to be inherently stochastic. This paper focuses on the stochasticity of fracture processes that arises as a result of measurement uncertainties in the properties of the constituents in the heterogeneous microstructures of an Al 2 O 3 /TiB 2 ceramic composite system. Basic postulate here is that for a microstructure local material properties vary around their macroscopically measured value with the macroscopically measured value being the mean of the variation. A micromechanical cohesive finite element framework with explicit resolution of arbitrary fracture patterns and arbitrary microstructural morphologies is used in the analyses carried out in this paper. The randomness in the constituent properties at any given point in the microstructure is specified relative to the local mean values of the corresponding properties. A deterministic analysis and a stochastic analysis are carried out simultaneously. The combination of determinism and stochasticity is achieved by integrating a perturbation analysis of the influence of stochastic property variations around their mean values and a deterministic analysis for the microstructure with the mean values of the constituent properties. Calculations are carried out for actual and idealized microstructures of the Al 2 O 3 /TiB 2 material system. Calculations focus on analyzing the fracture response variation with varying levels of variation of material properties for a particular microstructural morphology as well as on analyzing the variations in fracture response with variations in microstructural morphology. It is observed that microstructural morphology is intricately linked to the variations in fracture response when material properties have stochastic origin. A microstructure less prone to fracture shows higher variations in fracture response when compared to the one which offers least resistance to the crack propagation. In addition, for a particular microstructural morphology, the levels of variations in the crack surface area generated and the variations in the energy release rate are of the same order as the levels of variations in constituent properties. The observations support the conclusion that a material designer needs to make conservative estimates for a material's performance if its microstructural construction imparts uncertainty to local material properties.

[1]  Min Zhou,et al.  Micromechanical Simulation of Dynamic Fracture Using the Cohesive Finite Element Method , 2004 .

[2]  Huanping Dai,et al.  Heterogeneity, spatial correlations, size effects and dissipated energy in brittle materials , 1994 .

[3]  Horacio Dante Espinosa,et al.  A computational model of ceramic microstructures subjected to multi-axial dynamic loading , 2001 .

[4]  Horacio Dante Espinosa,et al.  Grain level analysis of crack initiation and propagation in brittle materials , 2001 .

[5]  T. Belytschko,et al.  Efficient large scale non‐linear transient analysis by finite elements , 1976 .

[6]  V. Tomar,et al.  Bounds for element size in a variable stiffness cohesive finite element model , 2004 .

[7]  Armando Miguel Awruch,et al.  On stochastic finite elements for structural analysis , 1994 .

[8]  L. B. Freund,et al.  Energy dissipation in dynamic fracture of brittle materials , 1999 .

[9]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[10]  William A. Curtin,et al.  Stochastic microcrack nucleation in lamellar solids , 2003 .

[11]  Ted Belytschko,et al.  Transient probabilistic systems , 1988 .

[12]  L. B. Freund,et al.  Modeling and Simulation of Dynamic Fragmentation in Brittle Materials , 1999 .

[13]  Ted Belytschko,et al.  Probabilistic Finite Element Method , 1995 .

[14]  Jean-François Molinari,et al.  Stochastic fracture of ceramics under dynamic tensile loading , 2004 .

[15]  N. C. Nigam.  Introduction to Random Vibrations , 1983 .

[16]  Micromechanically based stochastic finite elements: length scales and anisotropy , 1996 .

[17]  Phillip M. Duxbury,et al.  Size effect and statistics of fracture in random materials , 1994 .

[18]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[19]  Gregory B. Beacher,et al.  Stochastic FEM In Settlement Predictions , 1981 .

[20]  Mircea Grigoriu,et al.  STOCHASTIC FINITE ELEMENT ANALYSIS OF SIMPLE BEAMS , 1983 .

[21]  R. Ghanem,et al.  Stochastic Finite Elements: A Spectral Approach , 1990 .

[22]  Samuel W. Key,et al.  Transient shell response by numerical time integration , 1973 .

[23]  Wen-Long Huang,et al.  The application of 2D elastic stochastic finite element method in the field of fracture mechanics , 1997 .

[24]  Y. Estrin,et al.  FE-analysis of mechanical response of simple structures with random non-uniformity of material properties , 1998 .

[25]  Xiaopeng Xu,et al.  Void nucleation by inclusion debonding in a crystal matrix , 1993 .

[26]  M. A. Lawrence,et al.  Basis random variables in finite element analysis , 1987 .

[27]  Namas Chandra,et al.  Analysis of Energy Balance When Using Cohesive Zone Models to Simulate Fracture Processes , 2002 .

[28]  Yu-Kweng Michael Lin.  Probabilistic Theory of Structural Dynamics , 1976 .

[29]  W. Weibull,et al.  The phenomenon of rupture in solids , 1939 .

[30]  M. Ostoja-Starzewski,et al.  Micromechanically based stochastic finite elements , 1993 .

[31]  C. R. Sundararajan,et al.  Probabilistic Structural Mechanics Handbook: Theory and Industrial Applications , 1995 .

[32]  Wing Kam Liu,et al.  Random field finite elements , 1986 .

[33]  S. Batdorf,et al.  Fundamentals of the Statistical Theory of Fracture , 1978 .