Design of a Morphing Airfoil with Composite Chiral Structure

The paper presents a design study for a morphing structural concept, which could be used to obtain a passively actuated high-lift wing configuration. A composite chiral honeycomb core is used to allow large variations of camber at limited strain levels in the structure of the aerodynamic surface. The design hypothesis is first assessed bymeans of structural analyses, which are performed applying two-dimensional and three-dimensional finite elements schemes. The results confirm the morphing capabilities in the chordwise direction of the structure, which still retains noteworthy axial and torsional stiffness properties. The aeroelastic performances of the morphing airfoil are then optimized, taking into account aeroelastic stability as well as strength constraints. The optimal parameters of chiral network and the required stiffness properties of the covering skin are identified. Overall, the work confirms the promising performances of morphing structures based on chiral topologies and assesses a numerical approach for the design of morphing aerodynamic structures.

[1]  Fabrizio Scarpa,et al.  Evaluation of hexagonal chiral structure for morphing airfoil concept , 2005 .

[2]  Vladimir Brailovski,et al.  Optimized design of an active extrados structure for an experimental morphing laminar wing , 2010 .

[3]  John Yen,et al.  Design and Implementation of a Shape Memory Alloy Actuated Reconfigurable Airfoil , 2003 .

[4]  H F Parker,et al.  The Parker variable camber wing , 1920 .

[5]  Alessandro Spadoni,et al.  Numerical and experimental analysis of the static compliance of chiral truss-core airfoils , 2007 .

[6]  Tomohiro Yokozeki,et al.  Mechanical properties of corrugated composites for candidate materials of flexible wing structures , 2006 .

[7]  John David Anderson,et al.  A history of aerodynamics and its impact on flying machines , 1997 .

[8]  Bernard Etkin,et al.  Dynamics of Atmospheric Flight , 1972 .

[9]  L. F. Campanile,et al.  The Belt-Rib Concept: A Structronic Approach to Variable Camber , 2000 .

[10]  Gareth J. Knowles,et al.  Static shape control for adaptive wings , 1994 .

[11]  M. Ruzzene,et al.  Composite chiral structures for morphing airfoils: Numerical analyses and development of a manufacturing process , 2010 .

[12]  R. Lakes,et al.  Properties of a chiral honeycomb with a poisson's ratio of — 1 , 1997 .

[13]  J. Renken,et al.  Mission-adaptive wing camber control systems for transport aircraft , 1985 .

[14]  Michael R Wisnom,et al.  Investigation of trapezoidal corrugated aramid/epoxy laminates under large tensile displacements transverse to the corrugation direction , 2010 .

[15]  M. Drela.  XFOIL: An Analysis and Design System for Low Reynolds Number Airfoils , 1989 .

[16]  O. Nelles.  Nonlinear System Identification: From Classical Approaches to Neural Networks and Fuzzy Models , 2000 .

[17]  Fabrizio Scarpa,et al.  Smart tetrachiral and hexachiral honeycomb: Sensing and impact detection , 2010 .

[18]  Cesare Cardani-Paolo Mantegazza.  Continuation and Direct Solution of the Flutter Equation , 1978 .

[19]  Roderic S. Lakes,et al.  Deformation mechanisms in negative Poisson's ratio materials: structural aspects , 1991 .

[20]  K. L. Roger,et al.  Airplane Math Modeling Methods for Active Control Design , 1977 .

[21]  Paolo Mantegazza,et al.  Active flutter suppression for a three surface transport aircraft by recurrent neural networks , 2009 .

[22]  Massimo Ruzzene,et al.  The hexachiral prismatic wingbox concept , 2008 .

[23]  Hans Peter Monner,et al.  Realization of an optimized wing camber by using formvariable flap structures , 2001 .

[24]  Fabrizio Scarpa,et al.  Flatwise buckling optimization of hexachiral and tetrachiral honeycombs , 2010 .

[25]  Farhan Gandhi,et al.  Skin design studies for variable camber morphing airfoils , 2008 .

[26]  Ruben Gatt,et al.  Elastic constants of 3-, 4- and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading , 2010 .