Determination of a Methodology to Derive Correlations Between Window Opening Mass Flow Rate and Wind Conditions Based on CFD Results

This paper presents a methodology for the development of an empirical equation which can provide the air mass flow rate imposed by single-sided wind-driven ventilation of a room, as a function of external wind speed and direction, using the results from Computational Fluid Dynamics (CFD) simulations. The proposed methodology is useful for a wide spectrum of applications, in which no access to experimental data or conduction of several CFD runs is possible, deriving a simple expression of natural ventilation rate, which can be further used for energy analysis of complicated building geometries in 0-D models or in object-oriented software codes. The developed computational model simulates a building, which belongs to Rheinisch-Westfalische Technische Hochschule (RWTH, Aachen University, Aachen, Germany) and its surrounding environment. A tilted window represents the opening that allows the ventilation of the adjacent room with fresh air. The derived data from the CFD simulations for the air mass flow were fitted with a Gaussian function in order to achieve the development of an empirical equation. The numerical simulations have been conducted using the Ansys Fluent v15.0® software package. In this work, the k-w Shear Stress Transport (SST) model was implemented for the simulation of turbulence, while the Boussinesq approximation was used for the simulation of the buoyancy forces. The coefficient of determination R2 of the curve is in the range of 0.84–0.95, depending on the wind speed. This function can provide the mass flow rate through the open window of the investigated building and subsequently the ventilation rate of the adjacent room in air speed range from 2.5 m/s to 16 m/s without the necessity of further numerical simulations.

[1]  Qingyan Chen,et al.  A model for calculating single-sided natural ventilation rate in an urban residential apartment , 2019, Building and Environment.

[2]  Panagiota Karava,et al.  Development of simple semiempirical models for calculating airflow through hopper, awning, and casement windows for single-sided natural ventilation , 2015 .

[3]  Xiaofeng Li,et al.  Predicting single-sided airflow rates based on primary school experimental study , 2016 .

[4]  Abdelsalam Aldawoud,et al.  Windows design for maximum cross-ventilation in buildings , 2017 .

[5]  Leon R. Glicksman,et al.  Design analysis of single-sided natural ventilation , 2003 .

[6]  Bje Bert Blocken,et al.  CFD simulation of cross-ventilation for a generic isolated building : impact of computational parameters , 2012 .

[7]  P. Linden.  THE FLUID MECHANICS OF NATURAL VENTILATION , 1999 .

[8]  Dominique Marchio,et al.  Development of a new correlation for single-sided natural ventilation adapted to leeward conditions , 2013 .

[9]  Mohamed B. Gadi,et al.  A comparison between CFD and Network models for predicting wind-driven ventilation in buildings , 2007 .

[10]  Dominique Marchio,et al.  Full scale experimental study of single-sided ventilation: Analysis of stack and wind effects , 2011 .

[11]  E. R. Hitchin,et al.  A review of experimental techniques for the investigation of natural ventilation in buildings , 1967 .

[12]  Bert Blocken,et al.  Coupled urban wind flow and indoor natural ventilation modelling on a high-resolution grid: A case study for the Amsterdam ArenA stadium , 2010, Environ. Model. Softw..

[13]  Per Heiselberg,et al.  Single-sided natural ventilation driven by wind pressure and temperature difference , 2008 .

[14]  K. Visagavel,et al.  Analysis of single side ventilated and cross ventilated rooms by varying the width of the window opening using CFD , 2009 .

[15]  Mattheos Santamouris,et al.  On the combination of air velocity and flow measurements in single sided natural ventilation configurations , 1996 .

[16]  Qingyan Chen,et al.  A new empirical model for predicting single-sided, wind-driven natural ventilation in buildings , 2012 .

[17]  Nikos Nikolopoulos,et al.  Numerical study of a naturally cross-ventilated building , 2010 .

[18]  Yoshihide Tominaga,et al.  On the accuracy of CFD simulations of cross-ventilation flows for a generic isolated building: Comparison of RANS, LES and experiments , 2017 .

[19]  Qingyan Chen,et al.  Ventilation performance prediction for buildings: A method overview and recent applications , 2009 .

[20]  Konstantinos-Stefanos Nikas,et al.  Experimental and numerical investigation of the tracer gas methodology in the case of a naturally cross-ventilated building , 2012 .

[21]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[22]  Nikos Nikolopoulos,et al.  Characterization and prediction of the volume flow rate aerating a cross ventilated building by means of experimental techniques and numerical approaches , 2011 .