Going beyond limits in Brillouin distributed fibre sensors: Challenges and possible approaches

Brillouin distributed optical fibre sensing has been a subject of intense research and industrial development for more than twenty years, demonstrating its capabilities to be an effective and powerful measurement tool for a wide range of applications. Making use of sophisticated implementations, remarkable progresses on the sensing performance have been reported in the last decade, allowing significant improvements in spatial resolution and sensing range. However, the demand for distributed sensors with more performing features is steadily growing, imposing new and more challenging requirements to the sensor design. This paper presents a brief overview of the fundamentals of Brillouin distributed fibre sensing and reviews the main current limitations and challenges faced when the sensing capabilities are pushed beyond the state-of-the-art. Different possible approaches and methods to enhance and compare the sensing performance are also discussed.

[1]  Luc Thévenaz,et al.  Effect of pulse depletion in a Brillouin optical time-domain analysis system. , 2013, Optics express.

[2]  Luc Thévenaz,et al.  Impact of Raman scattering and modulation instability on the performances of Brillouin sensors , 2011, International Conference on Optical Fibre Sensors.

[3]  G. Bolognini,et al.  Simplex-Coded BOTDA Sensor Over 120-km SMF With 1-m Spatial Resolution Assisted by Optimized Bidirectional Raman Amplification , 2012, IEEE Photonics Technology Letters.

[4]  S. Martín-López,et al.  Strong Cancellation of RIN Transfer in a Raman-Assisted BOTDA Using Balanced Detection , 2014, IEEE Photonics Technology Letters.

[5]  Sébastien Le Floch,et al.  Bipolar Optical Pulse Coding for Performance Enhancement in Botda Sensors References and Links , 2022 .

[6]  Marcelo A. Soto,et al.  Towards 1’000’000 resolved points in a distributed optical fibre sensor , 2014, Other Conferences.

[7]  K. Shimizu,et al.  Development of a distributed sensing technique using Brillouin scattering , 1995 .

[8]  Marcelo A. Soto,et al.  1’000’000 resolved points along a Brillouin distributed fibre sensor , 2014, Other Conferences.

[9]  S. Martín-López,et al.  Relative Intensity Noise Transfer Reduction in Raman-Assisted BOTDA Systems , 2014, IEEE Photonics Technology Letters.

[10]  A. Zadok,et al.  Random‐access distributed fiber sensing , 2012 .

[11]  Fabrizio Di Pasquale,et al.  Analysis of pulse modulation format in coded BOTDA sensors. , 2010, Optics express.

[12]  Moshe Tur,et al.  High Spatial and Spectral Resolution Long-Range Sensing Using Brillouin Echoes , 2010, Journal of Lightwave Technology.

[13]  Kazuo Hotate,et al.  Measurement of Brillouin Gain Spectrum Distribution along an Optical Fiber Using a Correlation-Based Technique : Proposal, Experiment and Simulation (Special Issue on Optical Fiber Sensors) , 2000 .

[14]  Han Wu,et al.  Hybrid distributed Raman amplification combining random fiber laser based 2nd-order and low-noise LD based 1st-order pumping. , 2013, Optics express.

[15]  S. Martín-López,et al.  Brillouin optical time-domain analysis assisted by second-order Raman amplification. , 2010, Optics Express.

[16]  Yongkang Dong,et al.  2 cm spatial-resolution and 2 km range Brillouin optical fiber sensor using a transient differential pulse pair. , 2012, Applied optics.

[17]  T. Gogolla,et al.  Distributed sensing technique based on Brillouin optical-fiber frequency-domain analysis. , 1996, Optics letters.

[18]  L. Thévenaz,et al.  Simplex-coded BOTDA fiber sensor with 1 m spatial resolution over a 50 km range. , 2010, Optics Letters.

[19]  S. Martín-López,et al.  Extending the Real Remoteness of Long-Range Brillouin Optical Time-Domain Fiber Analyzers , 2014, Journal of Lightwave Technology.

[20]  Sébastien Le Floch,et al.  Time/frequency coding for Brillouin distributed sensors , 2012, Other Conferences.

[21]  X. Bao,et al.  High-resolution DPP-BOTDA over 50 km LEAF using return-to-zero coded pulses. , 2010, Optics letters.

[22]  Marcelo A. Soto,et al.  Time gated phase-correlation distributed Brillouin fibre sensor , 2013, Other Conferences.

[23]  Pedro Corredera,et al.  Distributed Brillouin Fiber Sensor Assisted by First-Order Raman Amplification , 2010, Journal of Lightwave Technology.

[24]  Fabrizio Di Pasquale,et al.  Optimization of a Dpp-botda Sensor with 25 Cm Spatial Resolution over 60 Km Standard Single-mode Fiber Using Simplex Codes and Optical Pre-amplification References and Links High Spatial Resolution and Long-distance Botda Using Differential Brillouin Gain in A , 2022 .

[25]  T. Horiguchi,et al.  BOTDA-nondestructive measurement of single-mode optical fiber attenuation characteristics using Brillouin interaction: theory , 1989 .

[26]  G. Bolognini,et al.  Brillouin-Based Distributed Temperature Sensor Employing Pulse Coding , 2008, IEEE Sensors Journal.

[27]  Fabrizio Di Pasquale,et al.  Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification. , 2011, Optics express.