Guided Wave Inspection and Monitoring of Railway Track

Cost-effective NDE of the vast length of aging railway track around the world remains a challenge for the community. Continuously welded rail is installed in tension but temperature changes can result in rail buckling if the initial tension is insufficient or fatigue cracks and ultimately rail breaks if the initial tension is excessive. The NDE challenge therefore includes both the detection of defects and the measurement of axial stress. Since continuously welded railway lines may be thought of as one-dimensional elastic waveguides, they are natural candidates for guided wave ultrasound, which offers the potential to interrogate a large length of rail from a single position. Guided waves have been proposed as a means of detecting the axial stress in rails to prevent buckling and also as a means of detecting complete breakage and cracks prior to breakage. This paper reviews the approaches used and the modeling methods available to support the development of nondestructive inspection and monitoring systems. Possibilities for future systems are also discussed.

[1]  Richard L. Weaver,et al.  Propagating and evanescent elastic waves in cylindrical waveguides of arbitrary cross section , 2004 .

[2]  Paul D. Wilcox,et al.  Load Measurement in Structural Members Using Guided Acoustic Waves , 2006 .

[3]  Paul D. Wilcox,et al.  Guided wave testing of rail , 2003 .

[4]  Claudio Nucera,et al.  Theoretical Considerations and Applications of Nonlinear Guided Waves for Nondestructive Assessment of Structures: A Railroad Track Case-Study , 2012 .

[5]  Philip W. Loveday,et al.  Development of piezoelectric transducers for a railway integrity monitoring system , 2000, Smart Structures.

[6]  Philip W. Loveday,et al.  Guided wave propagation as a measure of axial loads in rails , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  P.W. Loveday,et al.  Analysis of Piezoelectric Ultrasonic Transducers Attached to Waveguides Using Waveguide Finite Elements , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  Ivan Bartoli,et al.  Modeling guided wave propagation with application to the long-range defect detection in railroad tracks , 2005 .

[9]  S. L. Grassie,et al.  Rail defects: an overview , 2003 .

[10]  J. Rose,et al.  Guided wave dispersion curves for a bar with an arbitrary cross-section, a rod and rail example. , 2003, Ultrasonics.

[11]  Philip W Loveday,et al.  Semi-analytical finite element analysis of elastic waveguides subjected to axial loads. , 2009, Ultrasonics.

[12]  Ivan Bartoli,et al.  Monitoring thermal stresses and incipient buckling of continuous-welded rails: results from the UCSD/BNSF/FRA large-scale laboratory test track , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  M Ph Papaelias,et al.  A review on non-destructive evaluation of rails: State-of-the-art and future development , 2008 .

[14]  P. Loveday,et al.  Simulation of piezoelectric excitation of guided waves using waveguide finite elements , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[15]  Richard L. Weaver,et al.  Laser vibrometry technique for measurement of contained stress in railroad rail , 2005 .

[16]  David Thompson,et al.  Decay rates of propagating waves in railway tracks at high frequencies , 2009 .

[17]  Joseph L. Rose,et al.  A guided wave approach to defect detection under shelling in rail , 2009 .

[18]  Ivan Bartoli,et al.  Modeling wave propagation in damped waveguides of arbitrary cross-section , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[19]  D. Thompson,et al.  Review of Progress in Quantitative Nondestructive Evaluation , 1982 .

[20]  Francois A. Burger,et al.  A Practical Continuous Operating Rail Break Detection System Using Guided Waves , 2012 .

[21]  Paul D. Wilcox,et al.  LONG RANGE INSPECTION OF RAIL USING GUIDED WAVES , 2003 .

[22]  P. Wilcox,et al.  The effect of load on guided wave propagation. , 2007, Ultrasonics.

[23]  Salvatore Salamone,et al.  Higher harmonic generation in nonlinear waveguides of arbitrary cross-section. , 2010, The Journal of the Acoustical Society of America.

[24]  Joseph L. Rose,et al.  Guided wave inspection potential of defects in rail , 2004 .

[25]  David Thompson,et al.  EXPERIMENTAL ANALYSIS OF WAVE PROPAGATION IN RAILWAY TRACKS , 1997 .

[26]  K Schwartz,et al.  DEVELOPMENT OF AN ACOUSTIC BROKEN RAIL DETECTION SYSTEM , 2004 .

[27]  Fabien Treyssède,et al.  Numerical modeling of guided wave interaction with non-axisymmetric cracks in elastic cylinders , 2011 .

[28]  David Thompson,et al.  Wave reflection and transmission due to defects in infinite structural waveguides at high frequencies , 2011 .

[29]  Ivan Bartoli,et al.  Non-contact ultrasonic inspection of rails and signal processing for automatic defect detection and classification , 2005 .

[30]  A. Lhémery,et al.  Simulation of Guided Wave Inspection Based on the Reciprocity Principle and the Semi‐Analytical Finite Element Method , 2007 .

[31]  Ivan Bartoli,et al.  Guided waves dispersion analysis for prestressed viscoelastic waveguides by means of the SAFE method , 2012 .

[32]  Joseph L. Rose,et al.  Application and potential of guided wave rail inspection , 2002 .

[33]  L. Gavric.  Computation of propagative waves in free rail using a finite element technique , 1995 .

[34]  Salvatore Salamone,et al.  Numerical and experimental study of guided waves for detection of defects in the rail head , 2011 .