A review of explosion prevention and protection systems suitable as ultimate layer of protection in chemical process installations

Ideally, explosion risk is identified and prevented at an early stage of process design, forming a key part of the inherently safer design (ISD) approach. However, in practice, explosion risk often cannot be eliminated completely. Reliable preventive and protective systems must therefore be applied, as part of the now widely applied barrier or independent layer of protection approach (LOPA) to process design. Doing this requires a comprehensive knowledge of available systems. However, such a comprehensive overview of the various systems does not yet exist. This paper provides such an overview. The commercially available explosion prevention and mitigative systems applicable to gas, dust, mist and hybrid (gas-aerosol) explosions are discussed, including basic principles and proper application for single and combined systems, for confined installations. Limitations of the applicability as well as limitations of the research-base of the various systems are also discussed.

[1]  Vinh N. Dang,et al.  Probabilistic Safety Assessment and Management , 2004 .

[2]  Trevor Kletz.  Inherently safer plants: An update , 1991 .

[3]  Trevor Kletz,et al.  Inherently safer plants , 1985 .

[4]  Dennis P. Nolan.  Handbook of Fire and Explosion Protection Engineering Principles: for Oil, Gas, Chemical and Related Facilities , 1997 .

[5]  Kris Chatrathi,et al.  Dust deflagration extinction , 2000 .

[6]  John E. Going,et al.  Explosion protection with metal dust fuels , 2002 .

[7]  Kris Chatrathi,et al.  Flame propagation in industrial scale piping , 2001 .

[8]  Ian Swift.  Developments in explosion protection , 1988 .

[9]  J. K. Richmond,et al.  A physical description of coal mine explosions , 1975 .

[10]  W. Kordylewski,et al.  Comparison of NaHCO3 and NH4H2PO4 effectiveness as dust explosion suppressants , 1992 .

[11]  H. Elkins,et al.  The Chemistry of Industrial Toxicology. , 1950 .

[12]  J. C. Mecklenburgh,et al.  Process plant layout , 1985 .

[13]  A. Hamins.  Flame extinction by sodium bicarbonate powder in a cup burner , 1998 .

[14]  H. J. Michels,et al.  Deflagration to detonation transition in mixtures of alkane LNG/LPG constituents with O2N2 , 1988 .

[15]  Wolfgang Bartknecht,et al.  Explosions, course, prevention, protection , 1981 .

[16]  Frank P. Lees,et al.  Loss Prevention In The Process Industries , 1980 .

[17]  Hans J. Pasman,et al.  Optimal Integration of Safety in complex system design using the Safety Modelling Language , 2004 .

[18]  R. Siwek,et al.  Prevent explosions of combustible dusts , 1999 .

[19]  N. Roussakis,et al.  A comprehensive test method for inline flame arresters , 1991 .

[20]  Ccps.  Guidelines for Engineering Design for Process Safety , 1993 .

[21]  Kirs Chatrathi,et al.  Pipe and duct deflagrations associated with incinerators , 1996 .

[22]  Trevor Kletz.  Process Plants: A Handbook for Inherently Safer Design , 1998 .

[23]  K. Cashdollar,et al.  Flammability limit measurements for dusts in 20-L and 1-m3 vessels , 2000 .

[24]  Rolf K. Eckhoff,et al.  Dust Explosions in the Process Industries , 1991 .

[25]  Kenneth L. Cashdollar,et al.  Industrial Dust Explosions , 1987 .

[26]  Arthur M. Dowell.  Layer of protection analysis and inherently safer processes , 1999 .

[27]  Richard Siwek.  New knowledge about rotary air locks in preventing dust ignition breakthrough , 1989 .

[28]  K. Chatrathi,et al.  Explosion isolation systems used in conjunction with explosion vents , 1991 .

[29]  Shahid Abbas Abbasi,et al.  Major accidents in process industries and an analysis of causes and consequences , 1999 .