High-accuracy transient response fiber optic seismic accelerometer using a shock-absorbing ring as a mechanical antiresonator.

This study proposes a high-accuracy transient response fiber optic seismic accelerometer based on the resonance suppression mechanism. A shock-absorbing ring is embedded in the accelerometer structure, which acts as a mechanical antiresonator. The experimental results show that the sensitivity at the resonance frequency is suppressed by 21.79 dB, and the 3 dB operating bandwidth is extended without reducing the average sensitivity. Under this condition, the high-accuracy transient response is obtained during the vibration-event test. This study provides a practical seismic acquisition technique solution for vertical seismic profiling monitoring in the smart oilfield.

[1]  Weilin Hou,et al.  High-resolution and fast-response fiber-optic temperature sensor using silicon Fabry-Pérot cavity. , 2015, Optics express.

[2]  Di Wu,et al.  Application of optical sensing system in heavy oil recovery , 2016 .

[3]  J. M. D. Freitas,et al.  Recent developments in seismic seabed oil reservoir monitoring applications using fibre-optic sensing networks , 2011 .

[4]  Min Zhang,et al.  Efficient Common-Mode Noise Suppression for Fiber-Optic Interferometric Sensor Using Heterodyne Demodulation , 2016, Journal of Lightwave Technology.

[5]  F. X. Bostick,et al.  Field test of a permanent in-well fiber-optic seismic system , 2005 .

[6]  Tad Bostick,et al.  Using a fiber-optic seismic array for well monitoring , 2005 .

[7]  Miao Yu,et al.  A Fiber-Optic Interferometric Tri-Component Geophone for Ocean Floor Seismic Monitoring , 2016, Sensors.

[8]  Ruiqing He,et al.  A Fiber Optic Borehole Seismic Vector Sensor System for High Resolution CCUS Site Characterization and Monitoring , 2014 .

[9]  Ruohui Wang,et al.  A Robust and Compact Fiber Bragg Grating Vibration Sensor for Seismic Measurement , 2011, IEEE Sensors Journal.

[10]  Somnath Bandyopadhyay,et al.  Design optimization of fiber Bragg grating accelerometer for maximum sensitivity , 2013 .

[11]  Gaoliang Peng,et al.  Application of the fiber-optic distributed temperature sensing for monitoring the liquid level of producing oil wells , 2014 .

[12]  Liu Fei,et al.  Experimental study on transient response of the fiber optic seismic accelerometer , 2018, Optical Fiber Technology.

[13]  Philip John Nash,et al.  Measurement of sensor axis misalignment in fibre-optic accelerometersThis paper was presented at the , 2006 .

[14]  Yanbiao Liao,et al.  A 3-component fiber-optic accelerometer for well logging , 2004 .