Intelligent 3D data extraction method for deformation analysis of composite structures

Abstract Nowadays, with the development of demand for construction, the use of composite structures in architectures become more and more popularity. How to improve the intelligent level of deformation monitoring has become one of the key problems. A detailed understanding about deformation behavior is significant for better monitoring of structures, especially in terms of accuracy and detail. The innovation of this paper focuses on that terrestrial laser scanning (TLS) measurement is adopted to investigate deformation of the composite masonry structures. In this paper, deformation segmentation and analysis of the masonry structures are investigated and the deformation tendency is compared and analyzed, based on the intelligent data extraction by window selection method, where high precision 3D laser technology provides reliable experimental data for this research. The deformation of different surfaces of a composite arch is considered and the maximum displacement distribution is analyzed through partially comparing the deformation of different epoch data.

[1]  K. Wu,et al.  Post-buckling analyses of variable-stiffness composite cylinders in axial compression , 2015 .

[2]  Yue Jin,et al.  Wi-Fi/MARG Integration for Indoor Pedestrian Localization , 2016, Sensors.

[3]  Ingo Neumann,et al.  Terrestrial Laser Scanning-Based Deformation Analysis for Arch and Beam Structures , 2017, IEEE Sensors Journal.

[4]  Mohammad Omidalizarandi,et al.  Terrestrial laser scanning technology for deformation monitoring and surface modeling of arch structures , 2017 .

[5]  A. Muliana,et al.  Nonlinear deformations of piezoelectric composite beams , 2015 .

[6]  G. Bosurgi,et al.  A Polynomial Parametric Curve (PPC-CURVE) for the Design of Horizontal Geometry of Highways , 2012, Comput. Aided Civ. Infrastructure Eng..

[7]  Ingo Neumann,et al.  Laser Scanning-Based Updating of a Finite-Element Model for Structural Health Monitoring , 2016, IEEE Sensors Journal.

[8]  Boris Kargoll,et al.  TLS-based Profile Model Analysis of Major Composite Structures with Robust B-spline Method , 2018 .

[9]  Ingo Neumann,et al.  A feature extraction method for deformation analysis of large-scale composite structures based on TLS measurement , 2018 .

[10]  Ingo Neumann,et al.  Monotonic loads experiment for investigation of composite structure based on terrestrial laser scanner measurement , 2018 .

[11]  Muttukrishnan Rajarajan,et al.  Feasibility studies using thin sol–gel films doped with a novel lead-selective fluorophore for optical fibre sensing applications , 2013 .

[12]  Alvise Sommariva,et al.  Polynomial approximation and quadrature on geographic rectangles , 2017, Appl. Math. Comput..

[13]  Arthur W. Leissa,et al.  Vibration and buckling of rectangular composite plates with variable fiber spacing , 1990 .

[14]  Ingo Neumann,et al.  Optimal finite element model with response surface methodology for concrete structures based on Terrestrial Laser Scanning technology , 2018 .

[15]  Ingo Neumann,et al.  Time-efficient filtering method for three-dimensional point clouds data of tunnel structures , 2018 .

[16]  Ingo Neumann,et al.  Deformation behavior analysis of composite structures under monotonic loads based on terrestrial laser scanning technology , 2018 .

[17]  A. Kidane,et al.  A multiscale experimental approach for correlating global and local deformation response in woven composites , 2018, Composite Structures.

[18]  A. R. Jac Fredo,et al.  Segmentation and analysis of damages in composite images using multi-level threshold methods and geometrical features , 2017 .

[19]  LinRen Zhou,et al.  Response Surface Method Based on Radial Basis Functions for Modeling Large-Scale Structures in Model Updating , 2013, Comput. Aided Civ. Infrastructure Eng..

[20]  Ingo Neumann,et al.  The Benefit of 3D Laser Scanning Technology in the Generation and Calibration of FEM Models for Health Assessment of Concrete Structures , 2014, Sensors.

[21]  Suong V. Hoa,et al.  Effect of structural parameters on design of variable-stiffness composite cylinders made by fiber steering , 2014 .

[22]  Michael W. Hyer,et al.  Innovative design of composite structures: The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes , 1990 .

[23]  D. Zenkert,et al.  A model to analyse deformations and stresses in structural batteries due to electrode expansions , 2017 .