On the Use of Dynamic Calibration to Correct Drop Counter Rain Gauge Measurements

Dynamic calibration was performed in the laboratory on two catching-type drop counter rain gauges manufactured as high-sensitivity and fast response instruments by Ogawa Seiki Co. Ltd. (Japan) and the Chilbolton Rutherford Appleton Laboratory (UK). Adjustment procedures were developed to meet the recommendations of the World Meteorological Organization (WMO) for rainfall intensity measurements at the one-minute time resolution. A dynamic calibration curve was derived for each instrument to provide the drop volume variation as a function of the measured drop releasing frequency. The trueness of measurements was improved using a post-processing adjustment algorithm and made compatible with the WMO recommended maximum admissible error. The impact of dynamic calibration on the rainfall amount measured in the field at the annual and the event scale was calculated for instruments operating at two experimental sites. The rainfall climatology at the site is found to be crucial in determining the magnitude of the measurement bias, with a predominant overestimation at the low to intermediate rainfall intensity range.

[1]  N. Jensen,et al.  Spatial Variability of Rainfall: variations within a single radar pixel , 2005 .

[2]  Henrik Madsen,et al.  Quantification of the spatial variability of rainfall based on a dense network of rain gauges , 2010 .

[3]  L. Stagi,et al.  Analysis of highly accurate rain intensity measurements from a field test site , 2010 .

[4]  P. Chan,et al.  Performance of post-processing algorithms for rainfall intensity using measurements from tipping-bucket rain gauges , 2016 .

[5]  Lionel Benoit,et al.  Stochastic Rainfall Modeling at Sub‐kilometer Scale , 2018, Water Resources Research.

[6]  L. Stagi,et al.  High resolution performance of catching type rain gauges from the laboratory phase of the WMO Field Intercomparison of Rain Intensity Gauges. , 2009 .

[7]  Janusz Niemczynowicz,et al.  The Dynamic Calibration of Tipping-Bucket Raingauges , 1986 .

[8]  J. White.  A rapid-response rain gauge , 1971 .

[9]  K. Dirks,et al.  A Rain Gauge for the Measurement of Finescale Temporal Variations , 1998 .

[10]  E. Anagnostou,et al.  Precipitation: Measurement, remote sensing, climatology and modeling , 2009 .

[11]  Luca G. Lanza,et al.  Co-located tipping-bucket and optical drop counter RI measurements and a simulated correction algorithm , 2013 .

[12]  E. Lewis,et al.  Quantifying and Mitigating Wind‐Induced Undercatch in Rainfall Measurements , 2018, Water Resources Research.

[13]  C. Kidd,et al.  A note on the dynamic calibration of tipping-bucket gauges , 1978 .

[14]  Luca G. Lanza,et al.  The WMO Field Intercomparison of Rain Intensity Gauges , 2009 .

[15]  Luca G. Lanza,et al.  Certified accuracy of rainfall data as a standard requirement in scientific investigations , 2008 .

[16]  J. Maršálek,et al.  Calibration of the tipping-bucket raingage , 1981 .